脉冲功率电容器用PbLa(ZrTi)O_3陶瓷性能研究

采用固相反应法制备了Pb0.96La0.06(Zr1-xTix)O3陶瓷,研究了Ti含量对所制陶瓷的电性能和储能特性的影响。结果表明,PbLa(ZrTi)O3陶瓷介电常数与电场强度呈非线性变化关系。当Ti含量x为0.08时,所测电滞回线细长狭窄,并呈下凹趋势,此时极化强度为22.18×10–6 C/cm2,储能密度为1.06 J/cm3。通过流延法制备的脉冲功率电容器击穿电压可大幅度提升,储能密度达1.95 J/cm3,具有高能量转换效率。     

Metabolic versatility in full-scale wastewater treatment plants performing enhanced biological phosphorus removal

This study analysed the enhanced biological phosphorus removal (EBPR) microbial community and metabolic performance of five full-scale EBPR systems by using fluorescence in situ hybridisation combined with off-line batch tests fed with acetate under anaerobic–aerobic conditions. The phosphorus accumulating organisms (PAOs) in all systems were stable and showed little variability between each plant, while glycogen accumulating organisms (GAOs) were present in two of the plants. The metabolic activity of each sludge showed the frequent involvement of the anaerobic tricarboxylic acid cycle (TCA) in PAO metabolism for the anaerobic generation of reducing equivalents, in addition to the more frequently reported glycolysis pathway. Metabolic variability in the use of the two pathways was also observed, between different systems and in the same system over time. The metabolic dynamics was linked to the availability of glycogen, where a higher utilisation of the glycolysis pathway was observed in the two systems employing side-stream hydrolysis, and the TCA cycle was more active in the A²O systems. Full-scale plants that showed higher glycolysis activity also exhibited superior P removal performance, suggesting that promotion of the glycolysis pathway over the TCA cycle could be beneficial towards the optimisation of EBPR systems.     

Occupational rehabilitation in the construction industry of Victoria

A survey of construction companies' secondary disability management practices was undertaken in the state of Victoria, Australia. The results indicate that formal rehabilitation and return‐to‐work programmes and practices are not adopted in many companies. Smaller construction firms were less likely to have adopted formal programmes or practices than medium‐to‐large firms. In particular, construction companies reported difficulties in the provision of suitable alternate or light duties for workers returning to work following an injury. Most companies regarded disability management practices to have increased operating costs while yielding little or no benefit in terms of reducing lost workdays. Strategies to overcome some of these impediments to rehabilitation and return‐to‐work in construction are recommended.     

镜头分割在H.264视频压缩编码及视频服务器中的应用

将镜头分割引入H.264编码端,改善其定比率分配帧类型策略,以针对视频内容特性提高编码效果,并提供压缩流的镜头句柄.提出结合时空切片的信息熵度量帧差、以动态阈值探测镜头边界指定为I帧,非边界帧为P或B帧优化编码,并补充闪光灯防误判算法.经验证动态阈值和熵度量法查全查准率比基本方法提高近18%和13%;结合编码psnr提高10%压缩率提高20%.镜头分割准确,有效提高编码性能,对压缩域视频分割和视频服务器也将产生重大意义.     

Numerical Simulation of Heat Transfer and Deformation of Initial Shell in Soft Contact Continuous Casting Mold Under High Frequency Electromagnetic Field

  Heat transfer and deformation of initial solidification shell in soft contact continuous casting mold under high frequency electromagnetic field were analyzed using numerical simulation method; the relative electromagnetic parameters were obtained from the previous studies. Owing to the induction heating of a high frequency electromagnetic field (20 kHz), the thickness of initial solidification shell decreases, and the temperature of strand surface and slit copper mold increases when compared with the case without the electromagnetic filed. The viscosity of flux decreases because of the induction heating of the high frequency electromagnetic field, and the dimension of the flux channel increases with electromagnetic pressure; thus, the deformation behavior of initial solidification shell was different before and after the action of high frequency electromagnetic field. Furthermore, the abatement mechanism of oscillation marks under high frequency electromagnetic field was explained.     

湿污泥颗粒的流化床干燥实验及模型

在鼓泡流化床内以河砂为干燥介质,对单颗粒湿污泥的流态化干燥特性进行实验研究,得到了流化床温度、污泥初始水分、污泥粒径及流化速度对干燥速率的影响规律：流化床温度及污泥粒径对干燥速率的影响都呈指数规律;污泥的水分越大,干燥速率越大;在鼓泡流化床流化速度达到2倍临界流化速度以上时,充分流化,流化速度再增大(2~5倍临界流化速度)对干燥速率没有明显影响. 在基本的扩散传质理论的基础上,利用实验数据回归得到湿污泥在鼓泡流化床内干燥的半经验模型,为流化床污泥干燥器的设计提供了基础数据和依据.     

14%乙羧氟草醚·氟磺胺草醚微乳剂的研制

本文介绍了乙羧氟草醚与氟磺胺草醚混配的一种微乳剂,简述了配制方法、质量指及药效试验结果,表明该微乳剂药效好、成本低、具有开发前景。     

改性蒙脱土的研究进展

改性蒙脱土是近年来受国内外学者广泛关注的矿物材料之一,由于其层间的特殊结构而被广泛应用于吸附、催化等领域。概括介绍了蒙脱土的结构和基本性质,重点讨论了蒙脱土改性方法和机理。对无机改性、有机改性和有机一无机复合改性分别作了论述,并展望了其应用前景。     

缸盖水腔CFD分析及连接钻孔优化

以某柴油机缸盖水腔变动情况为研究对象,对调整前后的缸盖水腔进行CFD仿真。针对缸盖下层水腔、排气道水腔的流速分布云图,结合上水孔及连接钻孔的流量分布,分析流动过程及调整后冷却能力减弱的详细原因。在此基础上,通过调整连接钻孔的直径及位置,提出满足冷却能力要求的优化方案,并对优化方案进行仿真验证。     

微型直升机自主飞行辅助视觉系统研究

为了实现微型直升机自主飞行,论文设计了实时的计算机视觉系统。该系统包括机载上的硬件设备和软件算法,能够实现目标识别、特征点提取和位置估计。文中设计了特定图标,并主要依据颜色来进行快速识别。此外,通过检测4个共面的图像特征点,能够在单目单帧的基础上计算出直升机相对于特定目标的三维位置信息。视觉系统任务由位于机载上的IntelSitsang板来执行。由于受到板子运算能力的限制,每秒钟可以处理5帧160×120的彩色图像。飞行实验结果表明,该视觉系统的目标识别率高达93%,角点计算偏差小于3个像素,同时自身定位的三维位置坐标平均偏差为8cm、13cm和6cm。因此,该视觉系统通过精确自身定位,能够很好的辅助微型直升机完成自主悬停、起飞和降落等飞行任务。