Kirchhoff calculations of the coherent scatter from a series of very rough surfaces

Calculations are presented for the scattering of polarized light from a series of very rough one-dimensional gold-coated surfaces, as determined by the use of the Kirchhoff approximation with geometric shadowing. These surfaces have Gaussian autocorrelation functions with a 1/e width of 3.3 μm and Gaussian probability distributions of height with standard deviation varying between 0.25 and 1.73 μm. Calculations are performed for the scattering of light of wavelength 3.392 μm, so that the validity of the geometric-shadowing approximation and the Kirchhoff approximation itself are open questions. The values of the coherent (or specular) component of the scattered light for the four nonzero elements of the Mueller matrix (which fully describe the polarization properties of the scattered light) are calculated. Comparisons between the calculated results and experimental measurements on surfaces of the same parameters [Knotts and O'Donnell, J. Opt. Soc. Am. A 11, 697 (1994)] show good agreement up to approximately 70° incidence angle.     

Parametric study of the absorption cross section for a moderately conducting thin cylinder

Asystem has been developed to measure the absorption cross section for a single carbon fiber at 35 GHz as a functio of length, orientation, and diameter. Typical lengths of the fibers considered ranged from 1 to 20 mm, and diameters ranged from 3 to 8 μm. The results were compared with the modified integra equation calculations of Waterman and Pedersen that describe the scattering and absorption behavior for a wire of finite length and conductivity. Good agreement was found for all lengths, orientations, and diameters studied.     

Assessing abrasion performance of self-consolidating concrete containing synthetic fibers using acoustic emission analysis

The key objective of this investigation was to evaluate the abrasion resistance of self-consolidating concrete (SCC) with and without synthetic fibers (SynFs). The abrasion resistance of normal concrete was also investigated in this study for comparison. The abrasion test was performed on concrete specimens according to the rotating-cutter method along with continuous monitoring of acoustic emission (AE) using attached AE sensors. The effects of changing concrete type and incorporating various types (flexible and semi-rigid) and lengths of SynFs on the abrasion behaviour were investigated with the aid of AE analysis. AE signal characteristics such as amplitude, signal strength, number of hits, and duration were gathered during testing. Furthermore, the collected AE data was used to complete b-value analysis as well as intensity analysis resulting in three additional parameters: b-value, severity (S_r), and historic index (H(t)). The results showed that the AE parameters were directly correlated with the abrasion damage in all tested mixtures. Adding SynFs to all SCC mixtures enhanced their abrasion resistance. The flexible fibers variety exhibited better abrasion performance on average than the semi-rigid fibers. Meanwhile, longer fibers showed lower abrasion resistance than the shorter ones with the same type. The results also indicated that AE intensity analysis was able to determine the ranges for H(t) and S_r that identify the extent of damage due to abrasion of SynF-reinforced SCC.     

Threshold Fluence Measurement for Laser Liftoff of InP Thin Films by Selective Absorption

We explore conditions for achieving laser liftoff in epitaxially grown heterojunctions, in which single crystal thin films can be separated from their growth substrates using a selectively absorbing buried intermediate layer. Because this highly non‐linear process is subject to a variety of process instabilities, it is essential to accurately characterize the parameters resulting in liftoff. Here, we present an InP/InGaAs/InP heterojunction as a model system for such characterization. We show separation of InP thin films from single crystal InP growth substrates, wherein a ≈10 ns, Nd:YAG laser pulse selectively heats a coherently strained, buried InGaAs layer. We develop a technique to measure liftoff threshold fluences within an inhomogeneous laser spatial profile, and apply this technique to determine threshold fluences of the order 0.5 J cm^?2 for our specimens. We find that the fluence at the InGaAs layer is limited by non‐linear absorption and InP surface damage at high powers, and measure the energy transmission in an InP substrate from 0 to 8 J cm^?2. Characterization of the ejected thin films shows crack‐free, single crystal InP. Finally, we present evidence that the hot InGaAs initiates a liquid phase front that travels into the InP substrate during liftoff.

     

Valorisation of mango seed via extraction of starch: preliminary techno-economic analysis

Reducing environmental impacts and obtaining economic benefits based on utilisation of waste materials are drivers for the implementation of cleaner production policies and technologies in food processing industries. Starch is a very versatile material with a wide range of applications in the food, pharmaceutical, textile, paper, cosmetic and construction industries. In Ethiopia, starch is widely used in the textile industry. To meet the starch demand, the country imports approximately 45% of the starch used in the country. Consequently, it is imperative to find additional sources of starch that could substitute for the amount of starch that is currently being imported. Mango seeds, a waste material that is disposed of after consumption of mangos, were studied for potential use as an alternative resource for starch production. The results showed that starch extraction from mango seeds was facile and a good quality product was obtained. The present study is concerned with a techno-economic analysis for industrial production of starch from mango seeds. The study shows that extraction of starch from waste mango seeds is feasible: the project is financially viable with an accounting rate of return of 83% and a break-even analysis of 78% with a payback period of 2 years.     

Surface-enhanced Raman scattering nanosensors for <Emphasis Type="Italic">in vivo</Emphasis> detection of nucleic acid targets in a large animal model

Although nanotechnology has led to important advances in in vitro diagnostics, the development of nanosensors for in vivo detection remains very challenging. Here, we demonstrated the proof-of-principle of in vivo detection of nucleic acid targets using a promising type of surface-enhanced Raman scattering (SERS) nanosensor implanted in the skin of a large animal model (pig). The in vivo nanosensor used in this study involves the “inverse molecular sentinel” detection scheme using plasmonics-active nanostars, which have tunable absorption bands in the near infrared region of the “tissue optical window”, rendering them efficient as an optical sensing platform for in vivo optical detection. Ex vivo measurements were also performed using human skin grafts to demonstrate the detection of SERS nanosensors through tissue. In this study, a new core–shell nanorattle probe with Raman reporters trapped between the core and shell was utilized as an internal standard system for self-calibration. These results illustrate the usefulness and translational potential of the SERS nanosensor for in vivo biosensing.

Open image in new window

     

Microstructural study of Au-Pd-Zn ohmic contacts to p-type InGaAsP-InP

A detailed microstructural study has been done on Au-Pd-Zn ohmic contacts to p-type InGaAsP epitaxially grown on InP. The doping level in the InGaAsP was 1.0 × 10¹⁹ to 1.5 × 10¹⁹ cm^–3 near the surface with the Zn concentration graded to a value of 7 × 10¹⁸ cm^–3 at the InGaAsP-InP interface. Metal layers (10 nm Pd,3 nmZn, 25 nm Pd and 50 nm Au) were deposited sequentially by electron beam evaporation. Contact resistances less than 10^–4 cm² were achieved for all annealing temperatures studied (380–440 C) and a minimum contact resistance of 2 × 10^–6 cm² was obtained for an anneal at 400 C for 20 s. Comparisons were made to similar metallizations on p-type InP. Lower contact resistances were achieved for the quaternary material compared with the binary material, however, contact stability and uniformity were worse.     

CHL1 encodes a component of the low-affinity nitrate uptake system in Arabidopsis and shows cell type-specific expression in roots

The Arabidopsis CHL1 (AtNRT1) gene confers sensitivity to the herbicide chlorate and encodes a nitrate-regulated nitrate transporter. However, how CHL1 participates in nitrate uptake in plants is not yet clear. In this study, we examined the in vivo function of CHL1 with in vivo uptake measurements and in situ hybridization experiments. Under most conditions tested, the amount of nitrate uptake by a chl1 deletion mutant was found to be significantly less than that of the wild type. This uptake deficiency was reversed when a CHL1 cDNA clone driven by the cauliflower mosaic virus 35S promoter was expressed in transgenic chl1 plants. Furthermore, tissue-specific expression patterns showed that near the root tip, CHL1 mRNA is found primarily in the epidermis, but further from the root tip, the mRNA is found in the cortex or endodermis. These results are consistent with the involvement of CHL1 in nitrate uptake at different stages of root cell development. A functional analysis in Xenopus oocytes indicated that CHL1 is a low-affinity nitrate transporter with a K(m) value of approximately 8.5 mM for nitrate. This finding is consistent with the chlorate resistance phenotype of chl1 mutants. However, these results do not fit the current model of a single, constitutive component for the low-affinity uptake system. To reconcile this discrepancy and the complex uptake behavior observed, we propose a "two-gene" model for the low-affinity nitrate uptake system of Arabidopsis.     

Tests for comparing images based on randomization and permutation methods

Tests comparing image sets can play a critical role in PET research, providing a yes-no answer to the question "Are two image sets different?" The statistical goal is to determine how often observed differences would occur by chance alone. We examined randomization methods to provide several omnibus test for PET images and compared these tests with two currently used methods. In the first series of analyses, normally distributed image data were simulated fulfilling the requirements of standard statistical tests. These analyses generated power estimates and compared the various test statistics under optimal conditions. Varying whether the standard deviations were local or pooled estimates provided an assessment of a distinguishing feature between the SPM and Montreal methods. In a second series of analyses, we more closely simulated current PET acquisition and analysis techniques. Finally, PET images from normal subjects were used as an example of randomization. Randomization proved to be a highly flexible and powerful statistical procedure. Furthermore, the randomization test does not require extensive and unrealistic statistical assumptions made by standard procedures currently in use.