Modeling of the electrostrictive, dielectric, and piezoelectric properties of ceramic PbTiO(3)

The upper and lower limits of the electrostrictive constants, dielectric permittivities, spontaneous polarizations, and piezoelectric coefficients were calculated for ceramic PbTiO(3) from theoretical single-crystal constants. Experimental ceramic data fall between these upper and lower limits. The large piezoelectric anisotropy d(33)/d(31) of ceramic PbTiO(3 ) was shown to be related to the single-crystal PbTiO(3) electrostrictive anisotropies Q(11)/Q(12 ) and Q(44)/Q(12). The possibility of a change in sign of the ceramic d(31) coefficient due to a slight variation in the single-crystal electrostrictive anisotropies was discussed. The single-crystal and predicted ceramic hydrostatic electrostrictive constants were found to be equal. Using this result the ceramic hydrostatic g(h ) coefficient is always smaller than the single-crystal g (h), but the ceramic hydrostatic d(h) coefficient can be either larger or smaller than the single-crystal d(h) depending on the dielectric anisotropy (epsilon (11)/epsilon(33)) of the single-crystal.     

Evidence for the Microwave Effect During the Annealing of Zinc Oxide

A microwave/conventional hybrid furnace has been used to anneal virtually fully dense zinc oxide ceramics under pure conventional and a microwave/conventional hybrid heating regime with a view to obtaining evidence for the "microwave effect" during the resulting grain growth. In each case it was ensured that each sample within a series had an identical thermal history in terms of its temperature/time profile. The results showed that grain growth was enhanced during hybrid heating compared with pure conventional heating; the greatest enhancement, a factor of ∼3 increase in average grain size, was observed in the range 1100°–1150°C. The grain growth exponent decreased from 3 during conventional heating to 1.4 during hybrid heating in this temperature range, suggesting an acceleration of the diffusional processes involved. Temperature gradients within the samples were found to be too small to explain the results. This suggests that clear evidence has been found to support the existence of a genuine "microwave effect."     

Structural–Property Relations in a Reduced and Internally Biased Oxide Wafer (RAINBOW) Actuator Material

Reduced and internally biased oxide wafer (RAINBOW) actuators are fabricated by a controlled reduction of Pb(Zr, Ti)O₃-based piezoelectric material. The reduction process results in a conductive layer composed of an interconnected metallic lead phase and refractory oxides (ZrTiO₄, ZrO₂, La₂O₃, etc.). The nature of the reduction is discovered to be the result of a complex volume change leading to a nanoscale interconnected metallic structure. The distribution of phases within the cermet vary within the thickness of the wafer. Within the piezoelectric ceramic phase, the reduction process modifies the grain-boundary structure to give two distinct types of fracture: transgranular and intergranular. The complexed microstructures of the RAINBOW actuator materials are discussed in relation to their dielectric and piezoelectric properties.     

Attraction of Male European Tarnished Plant Bug, <Emphasis Type="Italic">Lygus rugulipennis</Emphasis> to Components of the Female Sex Pheromone in the Field

Previous work showed that females of the European tarnished plant bug, Lygus rugulipennis Poppius (Heteroptera: Miridae), produced three chemicals, hexyl butyrate, (E)-2-hexenyl butyrate, and (E)-4-oxo-2-hexenal, and that these were suspected to be components of the female sex pheromone. In field experiments, traps baited with blends of these chemicals dispensed from polyethylene vials and sachets failed to catch significant numbers of males. Here, we report more recent field experiments in which the chemicals were released from glass microcapillary tubes. A blend of hexyl butyrate and (E)-4-oxo-2-hexenal was significantly attractive to male L. rugulipennis. In addition, whereas the mixture of all three components attracted fewer L. rugulipennis males, this tertiary blend captured significantly greater numbers of males of the congeneric species Lygus pratensis than the binary mixture. The possible reasons for the success of the microcapillaries compared with other dispensers are discussed.     

A vapor collection and thermal desorption method to measure semiochemical release rates from controlled release formulations

Chemicals (bp 270–490 °C/1 atm) evaporated from a controlled-release formulation dispenser were carried by an airflow to a collector packed with a polymeric adsorbent. After a set time, the chemicals were recovered by thermally desorbing them onto a gas-liquid chromatograpic column. They were then separated and quantified. The apparatus is described, and the requirements for its successful use are discussed. The soundness of the thermal desorption technique was confirmed by comparison with another technique: solvent elution from the collector. The advantages of the former technique are discussed.Mention of a commercial or proprietary product in this paper does not constitute an endorsement of that product by the USDA.     

Apparatus and procedure for measuring release rates from formulations of lepidopteran semiochemicals

An apparatus was developed wherein a vacuum source was used to pull air across a controlled-release-formulation dispenser or a planchet containing a known quantity of a semiochemical and into a collector filled with a polymeric adsorbent. After a set time, the semiochemical was eluted with solvent and was quantified by gas-liquid chromatography (GLC). High percentages of known quantities of the lepidopteran semiochemicals (Z)-7-dodecen-l -ol acetate (Z7DDA), boiling point (bp) 275 ° C/1 atm, (Z)-9-tetradecen-1-ol formate (Z9TDF), bp 289 °C/1 atm, and (Z,Z)-3,13-octadecadien-1-ol acetate (ZZODDA), bp 490 °C/1 atm, were recovered. The semiochemicals did not oxidize and were recovered quantitatively from the adsorbent. The release rates of Z9TDF from a controlled-release dispenser were found to be directly proportional to the airflow rates. Release rate measurements on the Z9TDF dispensers were made for the purpose of estimating the method's precision. The method was shown to give internally consistent results by measurements on another Z9TDF formulation. The accuracy of the method is discussed.Mention of a commercial or proprietary product in this paper does not constitute an endorsement by the USDA.     

Barium Metaplumbate Ceramic Electrodes for Ceramic Capacitors

A novel approach to reduce electrode costs in ceramic capacitors is presented. Barium metaplumbate (BaPbO₃) was fired onto sintered commercial (Ba, Sr)TiO₃ disk capacitors as external electrodes. Samples were compared to disk capacitors of the same composition with electrodes made of sputtered gold and air-dried silver. The ceramic electrode led to substantial changes in the insulation resistance and dc breakdown strengths, but other properties remained the same. The feasibility of using BaPbO₃ electrodes strongly depends on chemical reactions between the electrode and dielectric.     

Model-based and Fuzzy Logic Approaches to Condition Monitoring of Operational Wind Turbines

 It is common for wind turbines to be installed in remote locations on land or offshore, leading to difficulties in routine inspection and maintenance. Further, wind turbines in these locations are often subject to harsh operating conditions. These challenges mean there is a requirement for a high degree of maintenance. The data generated by monitoring systems can be used to obtain models of wind turbines operating under different conditions, and hence predict output signals based on known inputs. A model-based condition monitoring system can be implemented by comparing output data obtained from operational turbines with those predicted by the models, so as to detect changes that could be due to the presence of faults. This paper discusses several techniques for model-based condition monitoring systems: linear models, artificial neural networks, and state dependent parameter "pseudo" transfer functions. The models are identified using supervisory control and data acquisition (SCADA) data acquired from an operational wind firm. It is found that the multiple-input single-output state dependent parameter method outperforms both multivariate linear and artificial neural network-based approaches. Subsequently, state dependent parameter models are used to develop adaptive thresholds for critical output signals. In order to provide an early warning of a developing fault, it is necessary to interpret the amount by which the threshold is exceeded, together with the period of time over which this occurs. In this regard, a fuzzy logic-based inference system is proposed and demonstrated to be practically feasible.     

A decision support tool for the diagnosis of breast cancer based upon Fuzzy ARTMAP

This paper presents research into the application of the fuzzy ARTMAP neural network model to the diagnosis of cancer from fine-needle aspirates of the breast. Trained fuzzy ARTMAP networks are differently pruned so as to maximise accuracy, sensitivity and specificity. The differently pruned networks are then employed in a cascade of networks intended to separate cases into certain and suspicious classes. This mimics the predictive behaviour of a human pathologist. The fuzzy ARTMAP model also provides symbolic rule extraction facilities and the validity of the derived rules for this domain is discussed. Additionally, results are provided showing the effects upon network performance of different input features and different observers. The implications of the findings are discussed.     

CHL1 encodes a component of the low-affinity nitrate uptake system in Arabidopsis and shows cell type-specific expression in roots

The Arabidopsis CHL1 (AtNRT1) gene confers sensitivity to the herbicide chlorate and encodes a nitrate-regulated nitrate transporter. However, how CHL1 participates in nitrate uptake in plants is not yet clear. In this study, we examined the in vivo function of CHL1 with in vivo uptake measurements and in situ hybridization experiments. Under most conditions tested, the amount of nitrate uptake by a chl1 deletion mutant was found to be significantly less than that of the wild type. This uptake deficiency was reversed when a CHL1 cDNA clone driven by the cauliflower mosaic virus 35S promoter was expressed in transgenic chl1 plants. Furthermore, tissue-specific expression patterns showed that near the root tip, CHL1 mRNA is found primarily in the epidermis, but further from the root tip, the mRNA is found in the cortex or endodermis. These results are consistent with the involvement of CHL1 in nitrate uptake at different stages of root cell development. A functional analysis in Xenopus oocytes indicated that CHL1 is a low-affinity nitrate transporter with a K(m) value of approximately 8.5 mM for nitrate. This finding is consistent with the chlorate resistance phenotype of chl1 mutants. However, these results do not fit the current model of a single, constitutive component for the low-affinity uptake system. To reconcile this discrepancy and the complex uptake behavior observed, we propose a "two-gene" model for the low-affinity nitrate uptake system of Arabidopsis.