Olfactory Responses of Banana Weevil Predators to Volatiles from Banana Pseudostem Tissue and Synthetic Pheromone

As a response to attack by herbivores, plants can emit a variety of volatile substances that attract natural enemies of these insect pests. Predators of the banana weevil, Cosmopolites sordidus (Germar) (Coleoptera: Curculionidae) such as Dactylosternum abdominale (Coleoptera: Hydrophilidae) and Pheidole megacephala (Hymenoptera: Formicidae), are normally found in association with weevil-infested rotten pseudostems and harvested stumps. We investigated whether these predators are attracted to such environments in response to volatiles produced by the host plant, by the weevil, or by the weevil–plant complex. We evaluated predator responses towards volatiles from banana pseudostem tissue (synomones) and the synthetic banana weevil aggregation pheromone Cosmolure+ in a two-choice olfactometer. The beetle D. abdominale was attracted to fermenting banana pseudostem tissue and Cosmolure+, whereas the ant P. megacephala was attracted only to fermented pseudostem tissue. Both predators were attracted to banana pseudostem tissue that had been damaged by weevil larvae irrespective of weevil presence. Adding pheromone did not enhance predator response to volatiles from pseudostem tissue fed on by weevils. The numbers of both predators recovered with pseudostem traps in the field from banana mats with a pheromone trap were similar to those in pseudostem traps at different distance ranges from the pheromone. Our study shows that the generalist predators D. abdominale and P. megacephala use volatiles from fermented banana pseudostem tissue as the major chemical cue when searching for prey.     

Laser-induced desorption of small molecules from oxide surfaces: A first-principles study

Recent efforts in the theoretical simulation of laser-induced desorption of small molecules from surfaces are summarized. As a representative example, photodesorption of CO molecules from a Cr₂O₃(0001) surface is investigated since detailed quantum state resolved experimental results are available for this system. In particular, vectorial properties such as the alignment of the desorbing species are considered. Furthermore, the influence of surface temperature as a control parameter is investigated, and lateral velocity distributions are calculated and compared with experimental results. All simulations presented in the present study are based on ab initio potential energy surfaces (PESs) for the electronic ground state as well as electronically excited states involved in the desorption process. These PESs provide the prerequisite for extensive high-dimensional quantum mechanical simulations of the dynamics of nuclear motion based on a stochastic wave packet scheme. These wave packet calculations allow for a detailed microscopic understanding of experimental results and provide a perspective for future experiments.     

The Discovery and Structure-Activity Evaluation of (+)-Floyocidin B and Synthetic Analogs

Tuberculosis represents one of the ten most common courses of death worldwide and the emergence of multidrug-resistant M. tuberculosis makes the discovery of novel anti-tuberculosis active structures an urgent priority. Here, we show that (+)-floyocidin B representing the first example of a novel dihydroisoquinoline class of fungus-derived natural products, displays promising antitubercular hit properties. (+)-Floyocidin B was identified by activity-guided extract screening and its structure was unambiguously determined by total synthesis. The absolute configuration was deduced from a key synthesis intermediate by single crystal X-ray diffraction analysis. A hit series was generated by the isolation of further natural congeners and the synthesis of analogs of (+)-floyocidin B. Extensive biological and physicochemical profiling of this series revealed first structure-activity relationships and set the basis for further optimization and development of this novel antitubercular scaffold.     

Low-pressure,thermo-compressive lamination

Lamination of green ceramic tapes is one of the most important technological processes in multilayer ceramic technology. Lamination affects the quality of all 3D structures (e.g., channels, chambers, membranes, etc.). Novel chemical methods of lamination reduce the deformation of 3D structures. However, these methods are useless in the fabrication of thin membranes and structures with thick-film electronic components or electric vias. Therefore, thermo-compressive lamination is still the best solution for the lamination of green ceramic tapes. Low-pressure thermo-compressive lamination with an insert material is presented in this paper. The influence of pressure and Low Temperature Cofired Ceramics (LTCC) material on the compressibility and shrinkage of LTCC, as well as the influence of the insert material on deflection and distortion of the membranes are presented and discussed in this paper.     

Combining Acoustic Emission and Vibration Technologies Harbors Huge Potential for Material Characterization

The demand for raw materials is growing worldwide, in step with increasing world population and rising living standards of emerging countries. It is becoming more difficult to exploit primary raw materials because of declining ore grades and increasingly complicated mineralogies. Thus, the efficient and environmentally sustainable exploitation of primary resources using innovative technologies has emerged as an important research field to address these issues. An innovative approach is introduced to optimize process and quality control by combining acoustic emission (AE) and vibration technology. The general feasibility of these two technologies for material recognition and characterization is examined. The new approach was tested to determine whether coal could be distinguished from waste rock.     

The Chemical Evolution of the La<Subscript>0.6</Subscript>Sr<Subscript>0.4</Subscript>CoO<Subscript>3−δ</Subscript> Surface Under SOFC Operating Conditions and Its Implications for Electrochemical Oxygen Exchange Activity

Owing to its extraordinary high activity for catalysing the oxygen exchange reaction, strontium doped LaCoO₃ (LSC) is one of the most promising materials for solid oxide fuel cell (SOFC) cathodes. However, under SOFC operating conditions this material suffers from performance degradation. This loss of electrochemical activity has been extensively studied in the past and an accumulation of strontium at the LSC surface has been shown to be responsible for most of the degradation effects. The present study sheds further light onto LSC surface changes also occurring under SOFC operating conditions. In-situ near ambient pressure X-ray photoelectron spectroscopy measurements were conducted at temperatures between 400 and 790 °C. Simultaneously, electrochemical impedance measurements were performed to characterise the catalytic activity of the LSC electrode surface for O₂ reduction. This combination allowed a correlation of the loss in electro-catalytic activity with the appearance of an additional La-containing Sr-oxide species at the LSC surface. This additional Sr-oxide species preferentially covers electrochemically active Co sites at the surface, and thus very effectively decreases the oxygen exchange performance of LSC. Formation of precipitates, in contrast, was found to play a less important role for the electrochemical degradation of LSC.     

Interaction of 1-allyl-3-methyl-imidazolium chloride and carbon black and its influence on carbon black filled rubbers

The interactions of the ionic liquid 1-allyl-3-methyl-imidazolium chloride (AMIMCl) with different grades of carbon black have been investigated using rheological measurements, differential scanning calorimetry and Raman spectroscopy. We could prove strong attractive interactions of AMIMCl with the carbon black surface, which result, for example, in the formation of an AMIMCl–carbon black–bucky gel and in an increased glass transition temperature of the ionic liquid in the presence of carbon black. Raman spectroscopy revealed that the AMIMCl is preferably attached to the edges of graphitic crystals at the carbon black surface, which have the highest adsorption energies. A surface treatment of different grades of carbon black with AMIMCl led to significant changes of the mechanical and electrical properties of different rubber compounds filled with carbon black, which can be attributed to a decreased filler–polymer interaction and a local plasticising effect of the AMIMCl at the carbon black surface.     

Lipid‐like Peptides can Stabilize Integral Membrane Proteins for Biophysical and Structural Studies

A crucial bottleneck in membrane protein structural biology is the difficulty in identifying a detergent that can maintain the stability and functionality of integral membrane proteins (IMPs). Detergents are poor membrane mimics, and their common use in membrane protein crystallography may be one reason for the challenges in obtaining high‐resolution crystal structures of many IMP families. Lipid‐like peptides (LLPs) have detergent‐like properties and have been proposed as alternatives for the solubilization of G protein‐coupled receptors and other membrane proteins. Here, we systematically analyzed the stabilizing effect of LLPs on integral membrane proteins of different families. We found that LLPs could significantly stabilize detergent‐solubilized IMPs in vitro. This stabilizing effect depended on the chemical nature of the LLP and the intrinsic stability of a particular IMP in the detergent. Our results suggest that screening a subset of LLPs is sufficient to stabilize a particular IMP, which can have a substantial impact on the crystallization and quality of the crystal.