Direct evidence for chain orientation in poly(acetylene)

Two conflicting structural models (platelet and fibril) have been proposed in the literature for pristine cis-poly(acetylene). The respective models have separate, distinct implications for the chemical, physical and electrical properties of the material, in particular, the cis-trans isomerization, doping and conduction mechanisms. Luttinger-type cis-poly(acetylene) was prepared and studied in the transmission electron microscope (TEM) by low-dose conventional imaging, in dark-field mode and by electron diffraction. Thin ‘films’ of the material were shown to consist of fibrillar nets, having fibrils of diameter 5–25 nm. Combined electron diffraction and dark-field observations in the TEM indicated the structural arrangement within the fibrils as that having polymer molecular chains aligned parallel to fibril axes.     

Frying Performance of No-<Emphasis Type="Italic">trans</Emphasis>, Low-Linolenic Acid Soybean Oils

Two extruded-expelled physically refined soybean oils with reduced contents of linolenic acid, ultra-low- linolenic acid (ULL, 1.5%) and low-linolenic acid (LL, 2.6%), and a extruded-expelled physically refined control oil (control, 5.3% linolenic acid) were evaluated by frying French fries in a commercial-like setting for 6 h day⁻¹ during 23 days. The oils became darker, increased in yellow color at the beginning, and became redder and less green throughout the process. Free fatty acids levels were not different among the oils until day 14, after which, ULL was different from the control for the remainder of frying. The conjugated dienoic acid values were greatest in the control. Generally, ULL and LL oils had lower percentages of polar compounds than did the control, providing a frying life 2 days longer than the control and ~30% increase in frying time. A trained sensory panel evaluated the French fries on days 2, 5, and 6. Buttery and potato flavors decreased, and rancid and painty flavors increased over frying time for all products. Rancid flavor was highest in the fries from the control oil. Overall, the ULL and LL oils performed better than did the control oil and ULL tended to perform better than the LL.     

Structure development in biaxially stretched polystyrene film: Part II. Theoretical analysis of orientation development

The present paper describes an analysis of the orientation developed in biaxially stretched polystyrene films in terms of the kinematics of the process and a viscoelastic constitutive equation. It was possible to achieve reasonable agreement of predicted and experimental birefringences through use of a convected Maxwell model and the Rheo-Optical Law.     

Diffusion on Some Simple Stratified Spaces

A variety of different imaging techniques produce data which naturally lie in stratified spaces. These spaces consist of smooth regions of maximal dimension glued together along lower dimensional boundaries. Diffusion processes are important as they can be used to represent noise in statistical models on spaces for which standard parametric probability distributions do not exist. We consider particles undergoing Brownian motion in some low dimensional stratified spaces, and obtain analytic solutions to the heat equation specifying the distribution of particles. These solutions play the role of prototypical distributions for studying behaviour near singularities. While probabilistic reasoning can be used to solve the heat equation in some straightforward cases, more generally we construct solutions from eigenfunctions of the Laplacian. Specifically, we solve the heat equation on: open books; two-dimensional cones; the Petersen graph with unit edge length; and the cone of this graph which corresponds to a space of evolutionary trees.     

Water-induced effects of hydrogen adsorption on Ru(001)

Adsorption and desorption of hydrogen and coadsorption of H₂ with H₂O and CO over Ru(00l) surface have been studied under UHV conditions using the technique of TDS. Surface hydrogen interacts with adsorbed water resulting in an additional desorption state at 510 K which is not easily displaced by CO, but the total number of adsorption sites for hydrogen adsorption is independent of the amount of H₂O predosed at room temperature. Hydrogen adsorption is blocked easily by CO dose (more than 0.5 L) or a small amount of O(a) formed from dissociative adsorption of water, and adsorbed hydrogen formed in the absence of significant water is easily displaced by CO dose at even room temperature.     

Mössbauer studies of illites and heat-treated illite as related to coal-conversion processes

Mossbauer spectra of iron species in the following illites were studied: Grundite, Fithian, Minerva, and New Albany. Spectra of samples of Fithian illite heated at temperatures of 225, 700, and 1000 °C were also obtained. Analyses of these spectra provide Mössbauer parameter values of iron species in the illites and heat-transformed illite for comparison with similar species found in coals containing illites and in coal process residues derived from them. The illites contain both ferric and ferrous species. Mössbauer parameters for one of the ferric species, designated M(2), are virtually the same as those of pyrite. The two species are therefore difficult to distinguish from one another. Values of the concentration of pyrite in coals and shales may be inflated if the pyrite concentration is measured by Mössbauer spectroscopy. Mössbauer spectra of the heat-treated illite samples reveal changes in iron distribution, principally at the 700 and 1000 °C levels, where there are found three and six different iron species respectively. These changes are accompanied by reduction of ferric to ferrous iron. This process should be integrated into any assessment of the iron chemistry which accompanies coal-conversion processes.     

Investigation of structure development in polyamide 11 and polyamide 12 tubular film extrusion

The processability of single bubble polyamide 11 and polyamide 12 films was investigated. The development of crystalline structure and chain orientation of polyamide 11 and polyamide 12 films in single bubble film blowing was studied by differential scanning calorimetry (DSC), wide angle X‐ray diffraction (WAXS), infrared (IR) spectroscopy, and birefringence. DSC measurements of both films revealed a spontaneous increase in glass transition temperature (T_g) and cold crystallization temperature (T_c) during aging at room conditions, with crystallinity and melting point remaining constant. Single bubble polyamide 11 and polyamide 12 films exhibited triclinic α and monoclinic γ crystals, respectively. The level of biaxial orientation was evaluated by calculating White‐Spruiell biaxial orientation factors with pole figure data. We were not able to produce biaxially oriented double bubble films with either polyamide 11 or polyamide 12.     

Prediction of DNA-binding regulatory proteins in bacteriophage T7

The high-resolution structure of several specific DNA-bindingproteins have been determined, and they display a common structuralmotif which mediates their binding to DNA. This motif consistsof two -helices connected by a sharp turn, and its amino acidsequence has several distinguishing features. A computer searchof the proteins coded by the genome of bacteriophage T7 hasbeen performed in an attempt to identify those proteins thatpotentially contain this motif. Eight proteins were found tohave regions similar to that of the motif. Of these, three arerelatively small, have no known function and are good candidatesfor being DNA-binding regulatory proteins. The methods describeduse commonly available computer programs and databases, andare therefore easy to implement.     

Mass transport effects on the electrodeposition of iron-nickel alloys at the presence of additives

Iron-nickel (Fe-Ni) plating bath solution chemistry was studied by determining the Fe-Ni equilibrium concentrations at various pH levels. It was found that the alloy composition is determined by solution equilibria, mass transfer of the electroactive species within the diffusion layer and by the surface coverage of the additives on the electrode. The effect of the rotation speed of the disc electrode and the presence of organic additives on the deposition of Fe-Ni alloys are evaluated. Boric acid increases the absolute iron deposition rate, while it inhibits the rate of nickel reduction. Saccharin and ethylene diamine influence the metal deposition rate but are not as effective as boric acid.