A specific complex between a polypeptide in the left helical conformation of polyproline type II and the B-DNA minor groove

The model of complex formation between polypeptide adopted lefthanded conformation of polyproline II type and minor groove of B-DNA presented. The specific recognition is attained due to possibility of hydrogen bond between Gly NH-group and Thymine O2-group and in addition between Pro CO-group and Guanine NH2-group and between Gly CO-group and Guanine NH2-group. Stereochemical satisfactory of the complex is observed.     

Vascular rejection post heart transplantation is associated with positive flow cytometric cross-matching

28 isolates of canine parvovirus type-2 (CPV-2) were obtained from dogs with hemorrhagic gastroenteritis in Italy. The antigenic structure of CPV-2 isolates was characterized, using four discriminating monoclonal antibodies. In addition, four vaccinal strains were examined. Similar to reports from Australia and the United Kingdom, a much higher prevalence of CPV-2a (25/28 isolates) was observed than the other variant type, CPV-2b (3/28 isolates). DNA fragments (2.2 kbp) of representative strains of CPV-2, CPV-2a and CPV-2b were amplified by the polymerase chain reaction (PCR) and the products were digested by the restriction enzymes (RE) RsaI, HpaII, HindIII and PvuII. The RvaI enzyme allows the differentiation of CPV-2 from CPV-2a and CPV-2b.     

Pressure pain thresholds in patients with craniomandibular disorders before and after treatment with acupuncture and occlusal splint therapy: a controlled clinical study

Fifty-five patients (46 women and 9 men) with craniomandibular disorders and a history of pain of at least 6 months' duration participated in this trial. The patients were randomly assigned to three groups: one group to receive acupuncture; one group to receive occlusal splint therapy; and one group to act as controls. Pressure pain threshold, clinical dysfunction score, and visual analog scale measures were used to evaluate patients before, immediately after, and 6 months after treatment. A moderate, but statistically significant, correlation was found between pressure pain threshold and the number of tender spots in the masticatory muscles (tau = -.43; P < .001), degree of tenderness in the masticatory muscles (tau = -.43; P < .001), clinical dysfunction score (tau = .32; P < .001), and the visual analog scale (tau = -.25; P < .01). The short-term results showed a statistically significant improvement in all evaluations for both treatment groups. No significant differences were found in the control group. The improvements resulted in significant differences between the control and each treatment group immediately after treatment. At the 6-month follow-up, no significant differences in pressure pain threshold or clinical dysfunction score were found in the two treatment groups compared with the short-term results.     

Fatigue anisotropy in cross-rolled, hardened medium carbon steel resulting from MnS inclusions

Anisotropy of forged steel components is especially adverse when it concerns rotationally symmetric components. Manganese sulfides (MnS) in steels may be desired for their improvement of machining properties; however, they also deteriorate fatigue behavior. A quantification of the effect of MnS on anisotropy is necessary to find an optimum for component dimensioning. To isolate the influence of MnS on anisotropy only, high cleanness of the test material is required. The test material in the current investigation was molten in a vacuum furnace to high-cleanness composition. Materials with two different S levels were produced to detect variations in anisotropy according to amount, shape, and distribution of the MnS inclusions. The two batches were cross-rolled to plates with a deformation ratio of 4.5. The MnS phase constitutes, upon forging or rolling, pancake-shaped inclusions. In the case of cross-rolling, an in-plane rotational symmetry of the inclusions could be created. The shape and size of these inclusions are essential for the mechanical behavior of the material. Push-pull fatigue testing was performed in longitudinal (in plane) and short transversal directions relative to the rolling plane. The results showed strong anisotropy of the fatigue behavior with inferior performance in short transverse directions where the principal stress is perpendicular to the flattened inclusions. The anisotropy was somewhat more pronounced for the high-S material, resulting from a different fatigue crack growth mechanism.     

Regulation of the proliferative potential of cord blood long-term culture-initiating cells (LTC-IC) by different stromal cell lines: implications for LTC-IC measurement

BACKGROUND AND OBJECTIVE: Long-term culture-initiating cells (LTC-IC) are the best available approximation to an in vitro assay of stem cells in humans although they still represent a heterogeneous population in terms of proliferative capacity and sensitivity to different growth factors. Human umbilical cord blood (CB) is rich in hemopoietic progenitor cells, as measured by clonogenic assays and contains stem cells capable of reconstituting the marrow after ablation in clinical transplantation. We evaluated the influence of culture conditions on the in vitro behavior of LTC-IC from CB. DESIGN AND METHODS: LTC-IC were evaluated in long-term cultures, comparing two types of murine stromal cell lines: M2-10B4 and M2-10B4 transfected with cDNAs for human G-CSF and IL-3. RESULTS: Two and five fold higher numbers of terminally differentiated cells were produced during nine weeks of culture of CB mononuclear or CD34+ cells respectively, in cultures containing a M2-10B4 IL-3 G-CSF cell line compared to cultures containing the parental cell line. Likewise, a higher number of colony-forming cells (CFC) were detected in the supernatant of cultures with the transfected cell line. In contrast, the number of CFC generated within the stromal layer, after 5 or 9 weeks of culture, was significantly higher in cultures on M2-10B4 cells than those on M2-10B4 IL-3 G-CSF. INTERPRETATION AND CONCLUSIONS: Our results show that the proliferative capacity of CB LTC-IC can be strongly influenced by culture conditions and that the frequency of LTC-IC estimated using these cell lines as stromal support is not identical.     

The effect of random vaccine response on the vaccination coverage required to prevent epidemics

The response people have to vaccination varies because their immune systems differ and vaccine failures occur. Here we consider the effect that a random response, independent for each vaccinee, has on the vaccination coverage required to prevent epidemics in a large community. For a community of uniformly mixing individuals an explicit expression is found for the critical vaccination coverage (CVC) and the effect of the vaccine response is determined entirely by the mean E(AB), where A and B, respectively, reflect the infectivity and susceptibility of a vaccinated individual. This result shows that the usual concept of vaccine efficacy, which focuses on the amount of protection the vaccine provides the vaccinee against infection, is not adequate to describe the requirements for preventing epidemics when vaccination affect infectivity. The estimation of E(AB) poses a problem because A and B refer to the vaccine response of the same individual. Similar results are found when there are different types of individual, but now the mean E(AB) may differ between types. However, for a community made up of households it is shown that the CVC also depends on other characteristics of the vaccine response distribution. In practice this means that estimating a single measure of vaccine effectiveness is generally not enough to determine the CVC. For a specific community of households it is found that the vaccination coverage required to prevent epidemics decreases as the variation in the vaccine response increases.     

Test procedures for verification of an electron pencil beam algorithm implemented for treatment planning

The calculation of an electron dose distribution in a patient is a difficult problem because of the presence of tissue and surface inhomogeneities. Verification of the dose planning system is therefore essential. In this investigation, a novel method is used to evaluate a commercially available system (Helax-TMS), at electron energies between 10 and 50 MeV, both for a conventional treatment unit and an MLC-collimated scanned beam unit with a helium-filled treatment head. First, the experiments were designed to verify the local beam database and some fundamental characteristics of the electron beam calculations. Secondly, a number of generalised situations that would be encountered in the clinical treatment planning were evaluated oblique incidence, field shaping with multi-leaf collimator, bolus edges, and air cavities. Dose distributions in two generalised anatomical phantoms simulating a neck and a nose were also analysed. The results have, when so possible, been presented as the dose ratio within the 'flattened area' for dose profiles and down to the 'treatment depth' (80% dose level) for depth doses. In the penumbra region and in the dose fall-off region, the comparison has been represented by the distance deviation between calculated and measured dose profiles or depth doses. A new tool, 'volume integration', was used to evaluate the deviations from a more clinical point of view. Most results were within +/- 2% in dose for volumes larger than a sphere with a diameter of 15 mm, or +/- 2 mm in position. Dose deviations were generally found for oblique incidences and below heterogeneities such as small air cavities and bolus edges in limited volumes.     

Penicillin vs. erythromycin in the treatment of diphtheria

PURPOSE: To review the University of Florida experience in treating ependymomas, analyze prognostic factors, and provide treatment recommendations. METHODS AND MATERIALS: Forty-one patients with ependymoma and no metastases outside the central nervous system received postoperative radiotherapy with curative intent between 1966 and 1989. Ten patients had supratentorial lesions, 22 had infratentorial lesions, and 9 had spinal cord lesions. All patients had surgery (stereotactic biopsy, subtotal resection, or gross total resection). Most patients with high-grade lesions received radiotherapy to the craniospinal axis. Low-grade intracranial lesions received more limited treatment. Spinal cord lesions were treated using either partial spine or whole spine fields. RESULTS: Of 32 intracranial tumors, 21 recurred, all at the primary site; no spinal cord tumors recurred. Overall 10-year survival rates were 51% (absolute) and 46% (relapse-free); by tumor site: spinal cord, 100%; infratentorial, 45%; supratentorial, 20% (p = 0.002). On multivariate analysis, tumor site was the only factor that influenced absolute survival (p = 0.0004); other factors evaluated included grade, gender, age, duration of symptoms, resection extent, primary tumor dose, treatment field extent, surgery-to-radiotherapy interval, and days under radiotherapy treatment. CONCLUSIONS: Patients with supratentorial or infratentorial tumors receive irradiation, regardless of grade. Craniospinal-axis fields are used when spinal seeding is radiographically or pathologically evident. Spinal cord tumors are treated using localized fields to the primary site if not completely resected. Failure to control disease at the primary site remains the main impediment to cure.     

An Extended Replication of an Experiment for Assessing Methods for Software Requirements Inspections

We have performed an extended replication of the Porter-Votta-Basili experiment comparing the Scenario method and the Checklist method for inspecting requirements specifications using identical instruments. The experiment has been conducted in our educational context represented by a more general definition of a defect compared to the original defect list. Our study involving 24 undergraduate students manipulated three independent variables: detection method, requirements specification, and the order of the inspections. The dependent variable measured is the defect detection rate. We found the requirements specification inspected and not the detection method to be the most probable explanation for the variance in defect detection rate. This suggests that it is important to gather knowledge of how a requirements specification can convey an understandable view of the product and to adapt inspection methods accordingly. Contrary to the original experiment, we can not significantly support the superiority of the Scenario method. This is in accordance with a replication conducted by Fusaro, Lanubile and Visaggio, and might be explained by the lack of individual defect detection skill of our less experienced subjects.     

Extraction technique for the determination of oxygen-18 in water using preevacuated glass vials

The need for a rapid, inexpensive technique for routine 18O/16O extraction from water has arisen recently through applications in the medical sciences and in hydrology. The traditional experimental technique for determining the oxygen isotope composition of water, the CO2-H2O equilibration method, is tedious, time consuming, and involves the use of custom-made glass apparatus. Furthermore, because of potential memory effects from one sample to the next, the glassware needs to be thoroughly cleaned between runs. A few attempts have been made to improve upon the method. Attempts to analyze water directly in the source of the mass spectrometer produced large memory effects and questionable results. Commercially available apparatus for automated extraction of 18O/16O from water is generally prohibitively expensive and often is designed to interface only with the manufacturer's own mass spectrometer. The method described in this paper utilizes inexpensive, off-the-shelf, preevacuated, glass vials. Preevacuated vials have been used by others for the isotopic analysis of breath CO2 and are well tested. The vials can be purchased in bulk from scientific apparatus suppliers at a relatively low cost. These are coupled with a simplified extraction line consisting of a stainless steel syringe needle and a glass cold trap. Vials are filled with CO2 and H2O and shaken in a constant-temperature water bath for at least 90 min. Since the vials are discarded after use, no cleaning is necessary, essentially eliminating any memory effect. Reproducibility is generally better than +/- 0.05%. The only reagents required are gaseous CO2 for equilibration, a dry ice/alcohol mixture for trapping water, and liquid nitrogen for transferring the CO2.