Skin and layer formation in films prepared from carbohydrates,poly(ethylene-co-acrylic acid), and polyethylene

Cornstarch, a canary dextrin, and a maltodextrin were compared in films blown from carbohydrates compounded with poly(ethylene-co-acrylic acid) (EAA), low-density polyethylene (LDPE), and aqueous ammonium hydroxide plasticizer. Dextrins or maltodextrins having dextrose equivalent values of one and greater caused dark-colored films with caramel odors, probably due to Maillard reactions. Blown films with hydrophobic skins and water sensitive cores were produced with the dextrinized carbohydrates, but not from natural cornstarch. Water sensitivity of films containing the dextrinized carbohydrate was reduced by recycling the films through the blown film die. A mechanism for development of the skins is proposed, as is a method for preparing thin semipermeable membranes. © 1993 John Wiley & Sons, Inc.

1 This article is a US Government work and, as such, is in the public domain in the United States of America.

     

充实自己,把握未来

正告别"一生",迎来"一世"。新旧交替中,中国车市开启了新的篇章。2013年,在"微增长"的预期下,国内汽车产销双双超过2000万辆,再创全球产销最高纪录,国内私家车保有量进一步提升。在汽车后市场被业内人公认为汽车售后利润增长点的情况下,这     

Interaction of transport resistances with biochemical reaction in packed-bed solid-state fermentors: effect of temperature gradients

Subdermal superficial liposuction, first presented by the authors at the ISAPS Congress at Zurich in 1989, is performed with thin three-hole Mercedes cannulas (diameter ranges from 1.8 to 2 mm) to treat small and secondary adiposities and to allow better skin retraction. Suction of the subdermal layer of fat reduces the thickness and consistency of the superficial fat and enhances the possibility of skin retraction. In cases where there is a large adiposity of the abdomen, arms, or inner thighs, there is a conspicuous volume of fat whose weight tends to overstretch and to carry the overlying skin downward. In these cases we need to reduce the large fat volume to permit effective skin retraction. Therefore, we apply the principles of traditional liposuction with those of subdermal superficial liposuction to aspirate large amounts of fat from all the adipose layers. We call this technique Massive All Layer Liposuction (MALL). The amount of skin shrinkage after this "defatting" procedure is remarkable and the clinical results are very good. The MALL technique can be applied to other areas as well. In our experience this new liposuction technique has dramatically reduced the indications of abdominoplasties and dermolipectomies of inner thighs and arms.     

Inactivating microorganisms using a pulsed electric fieldcontinuous treatment system

High-voltage pulsed electric fields (PEFs) can be used to inactivate microorganisms in liquids. Applying PEF technology to food pasteurization is a promising nonthermal method, which may radically change food preservation processes and provide consumers with microbiologically safe, minimally processed, fresh-like products. A continuous-flow system in a laboratory-size prototype was constructed for the nonthermal pasteurization of liquid foods with PEF technology. Major components in the prototype include a high-voltage repetitive pulse generator, a coaxial liquid food treatment chamber, a fiber-optic temperature sensing instrument and a data acquisition system. Microbial inactivation tests were conducted in the continuous PEF treatment system. Repetitive high-voltage pulses with an exponential decaying waveshape were applied to the liquid food which was pumped through the treatment chamber. Test microorganisms selected for inactivation were Escherichia coli, Staphylococcus aureus and Saccharomyces cerevisiae. Over 6-order-of-magnitude reductions in the viability of selected microorganisms were achieved while the food temperature was maintained below 40°C     

Coherent lidar airborne wind sensor II: flight-test results at 2 and 10 νm

The use of airborne laser radar (lidar) to measure wind velocities and to detect turbulence in front of an aircraft in real time can significantly increase fuel efficiency, flight safety, and terminal area capacity. We describe the flight-test results for two coherent lidar airborne shear sensor (CLASS) systems and discuss their agreement with our theoretical simulations. The 10.6-μm CO(2) system (CLASS-10) is a flying brassboard; the 2.02-μm Tm:YAG solid-state system (CLASS-2) is configured in a rugged, light-weight, high-performance package. Both lidars have shown a wind measurement accuracy of better than 1 m/s.     

The ultrastructural characteristics of the changes in the rat liver in the dynamics of experimental endotoxemia

Electron microscopic study was performed in the experiments on the rat liver while intravenously administering E. coli endotoxin. The dynamics of ultrastructural disorders during endotoxemia has been established and the role of "Kupffer cell-hepatocyte" microsystem in the liver detoxification function is shown.     

Overview of a Modal-Based Condition Assessment Procedure

Condition assessment is a term that is used to describe the process of characterizing the physical condition of constructed systems. This paper summarizes a condition assessment (CA) procedure based on a complete system of field-testing, finite element (FE) modeling, and load rating. Experimental techniques, including both modal testing and truckload testing, are used to collect measurements of the constructed systems. The basic mechanism and procedure of the FE modeling and calibration are presented. Different physical parameters of FE models are adjusted during the calibration process using both static and dynamic responses as criteria to achieve convergence between experimental measurements and analytical results using carefully developed objective functions. Finally, a bridge load rating is completed on the basis of the calibrated model. These developments are described and illustrated using a representative bridge as an example.     

Contextual Fear Conditioning Is Associated With Lateralized Expression of the Immediate Early Gene c-fos in the Central and Basolateral Amygdalar Nuclei.

Fos, the protein product of the immediate early gene c-fos, was used to map functional circuitry underlying contextual conditioned fear. Male rats were given footshocks in a distinctive context and later tested using freezing as the behavioral measure and compared with no-shock and no-retention-test control groups. An increased number of Fos-immunoreactive neurons was found in the lateral part of the central nucleus and in the anterior basolateral and lateral amygdalar nuclei in the brains of the conditioned-fear group compared with controls. Further, a greater number of Fos-immunoreactive neurons was observed in the right central and anterior basolateral nuclei compared with the number of labeled neurons in these structures on the left. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

PWR annulus thermal hydraulics important to analysis of pressurized thermal shock

Analysis of plume mixing in the annulus of a pressurized water reactor (PWR) are presented. The plume mixing analysis is based on a simple two-dimensional model that accounts for the surrounding flow and confinement. A correlation for entrainment is presented and comparison with experiment is made.Mixed convection resulting from downflow between parallel heated plates is studied experimentally. The experimental system used to obtain the data is described with the scaling rationale for choosing the working fluid. Heat transfer results are presented in terms of a Nusselt number and a correlation is given. Results show an enhancement in heat transfer with increasing Gr_Dh/Re_Dh² due to an increase in turbulence intensity associated with the buoyant wall layer. The correlation obtained for Gr_Dh/Re_Dh² < 2.29 was found to be Nu_Dh/Nu_Dh,0 = 1 + 2.93 (Gr_Dh/Re_Dh²)^0.54, where where Nu_Dh,0 is given by the Dittus-Boelter correlation. Use of this correlation for Gr_Dh/Re_Dh² > 2.29 is not recommended due to an observed flow bifurcation in this neighborhood.     

小板坯连铸机浸入式水口结构优化的模拟研究

采用物理模拟方法,以鞍钢第二炼钢厂小板坯连铸机为原型,进行浸入式水口结构参数优化实验,得到了适合鞍钢第二炼钢厂生产需要的浸入式水口结构参数,并分析了浸入式水口的结构参数对结晶器内钢液流动状况的影响。