机载航电系统通用ATS设计

文章从软硬件两方面讨论了机载航电系统通用ATS的设计方法.该系统以VXI总线模块、GPIB台式仪器硬件平台为依托,以ABBET标准软件结构为基础,采用格式化接口函数、仪器可互换和TPS可移植性技术,实现了机载航电系统ATS的标准化和通用化.     

环塔拉力赛 感恩公益行

正冒险与征服是环塔的魅力,团结与互助是环塔的人文关怀,热心公益更是环塔重要的一种精神……2014年6月6日,经过车手勇士们13天的拼搏与汗水,中国环塔(国际)拉力赛终于在哈密顺利的落下了帷幕。这次比赛中,感恩车队获得了不俗的战绩,感恩车队车手李铁军赢得ATV组亚军,捧得银牌将杯。虽然与冠军失之交臂,略显遗憾,但是感恩车手们付出的努力,都是有目共睹的。冒险与征服是环塔的魅力,团结与互助是环塔的人文关怀,热心公益     

Linear optimal control problem of a system with circuit-free graph structure

We solve a linear optimal control problem with state and control restrictions by the method of region analysis, where the state equations describe the flow in a directed graph without a circuit. The results are used for the optimal control of a system of hydroelectric power plants.     

充实自己,把握未来

正告别"一生",迎来"一世"。新旧交替中,中国车市开启了新的篇章。2013年,在"微增长"的预期下,国内汽车产销双双超过2000万辆,再创全球产销最高纪录,国内私家车保有量进一步提升。在汽车后市场被业内人公认为汽车售后利润增长点的情况下,这     

Effect of Compressive Deformation on Lenticular and Thin Plate Martensitic Transformations

The effect of compressive deformation testedabove the M_s temperature on the martensitemorphology in Fe-Ni-C alloys has been studied.Inthe Fe-30Ni-0.12C alloy,the M_s temperature is-50℃ The cylindrical specimens werecompressively deformed at -40℃.The strain rateswere 10,20,30 and 40%.X-ray analysis andmetallographic examination showed that nostrain-induced martensite was found.After quench-ing to -53℃,some thin plates and unusualmorphologies of lenticular martensites with bentand/or broken mid-ribs were observed.In theFe-30Ni-0.34C alloy,the M_s temperature is-120℃.Compressive deformation with differentstrain rates were carried out at room temperature.After quenching to the liquid nitrogen temperature,some bent thin plate matensites(unbroken)occur-red.The transformed twins in bent plate were alsobent and nearly parallel to the γ-α'interfaces.Orientation relationship between austenite and bentmartensite has been examined by means of trans-mission electron microscope.It was proved thatthese unusual morphologies are inherent in thecompressive pre-deformed austenite.     

Effect of pH on Formation, Proximate Composition and Rehydration Capacity of Winged Bean and Soybean Protein-Lipid Film

The effect of various pHs on winged bean and soybean protein-lipid films formation, proximate composition and rehydration capacity were studied. Film can only form within a specific range of pH. Films prepared at high pHs (7.5, 9.0, 10.0 and 11.0) contained higher proportions of proteins, ash and carbohydrate but lower proportion of fat than those at pH 6.7, 2.5 and 2.0. Winged bean and soybean films were found to have different pattern of rehydration, however both tended to absorb more water at high pH. With regard to film formation efficiency, nutritional value (higher protein content) and rehydration capacity, soybean film is better than winged bean film.     

铜表面微蚀处理新技术

采用过硫酸盐和几种特别添加剂配制成的微蚀剂,不仅具有传统微蚀剂的优点,而且拥有其独特的优点:微蚀处理的铜表面比传统微蚀剂处理的光亮;微蚀处理后暴露在空气中10 min,铜表面也不变色;微蚀处理后的元件没有原电池腐蚀现象发生;其工作溶液比传统微蚀剂稳定;微蚀速率容易控制以满足不同的微蚀要求;微蚀处理不影响精密线路板和元件的尺寸。     

无荷载状况下泡沫混凝土裂缝控制的研究

研究了水胶比、粉煤灰、PP纤维和高性能膨胀剂对无荷载状况下泡沫混凝土力学性能、收缩性能的影响.结果表明,泡沫混凝土在水化中后期表现为收缩的特征;在水胶比为0.3～0.5时,水胶比越大,最终泡沫混凝土的收缩越小,当水胶比大于0.5或小于0.2时,28 d收缩量都减小.乱向分布的纤维可以略微减小泡沫混凝土的收缩;一定掺量的膨胀剂可以有效地补偿泡沫混凝土变形收缩,在水化早期实现泡沫混凝土无收缩.