An apparatus for the study of wear under dynamic loading conditions

A multipurpose wear testing apparatus has been designed, constructed and calibrated. The apparatus is primarily an impact wear testing device, but it may also be used for vibratory and oscillatory wear experimentation. The system utilizes a versatile displacement- and force-controlled device, which allows accurate control and measurement of the load cycles and their frequencies and the relative normal and transverse velocities between the wear surfaces as well as their time of contact. Features of this design permit testing at elevated frequencies and investigation of the effect of individual parameters on the wear process. These features include a facility to manipulate the system stiffness, the ability to control the impact and rotational velocities independently, feedback to maintain a constant nominal stress parameter, the ability to use spherical or cylindrical wear specimens and a method of applying the load and relative transverse motion in a constant, random or prescribed manner. The design facilitates modifications to include lubrication and environmental control, measurement of friction forces and fretting wear capabilities. Some initial results are included.     

Expert systems for fault diagnosis of machinery

This paper is devoted to illustrating the impact of expert system technology on fault diagnosis of machinery. It first introduces the basic concept of a machinery environment and then discusses the main features of expert systems. A review of the state of the art of current applications in the field of machinery diagnosis is presented. The impact of this newly emerging technique on the design of diagnosis systems is also analysed.     

Mitosene-DNA adducts. Characterization of two major DNA monoadducts formed by 1,10-bis(acetoxy)-7-methoxymitosene upon reductive activation

Reductive activation of racemic 1,10-bis(acetoxy)-7-methoxymitosene WV15 in the presence of DNA, followed by enzymatic digestion and HPLC analysis, revealed the formation of various DNA adducts. Reduction is a necessary event for adduct formation to occur. This reductive activation was performed under hypoxic conditions in various ways: (1) chemically, using a 2-fold excess of sodium dithionite (Na2S2O4), (2) enzymatically using NADH-cytochrome c reductase, (3) electrochemically on a mercury pool working electrode, and (4) catalytically, using a H2/PtO2 system. Five different mitosene-DNA adducts were detected. These adducts were also present when poly(dG-dC) was used instead of DNA, but were absent with poly(dA-dT). All were shown to be adducts of guanine. Reduction of 1, 10-dihydroxymitosene WV14 in the presence of DNA did not result in detectable adduct formation, demonstrating the importance of good leaving groups for efficient adduct formation by these mitosenes. Finally, two of the adducts were isolated and their structures elucidated, using mass spectrometry, 1H NMR and circular dichroism (CD). The structures were assigned as the diastereoisomers N2-(1"-n-hydroxymitosen-10"-yl), 2'-deoxyguanosine (n = alpha or beta). These type of adducts, in which the mitosene C-10 is covalently bonded to the N-2 of a guanosylic group, are different from the well-known mitomycin C 2'-deoxyguanosine monoadducts, that is linked via the mitomycin C C-1 position, demonstrating that the order of reactivity of the C-1 and C-10 in these mitosenes is reversed, as compared to mitomycin C. The 7-methoxy substituent of WV15 is a likely factor causing this switch. Evidence is presented that the 7-substituent of mitosenes also influences their DNA alkylation site. Adducts 4 and 5 represent the first isolated and structurally characterized covalent adducts of DNA and a synthetic mitosene.     

Are exocytosis mechanisms neurotransmitter specific?

Neurotransmission is a multistage regulated process in which a variety of active molecules contained in vesicles are liberated in response to specific stimuli from different types of neurone or related cells. This includes the release of fast neurotransmitters such as amino acids and acetylcholine from central and peripheral synapses, but also that of relatively slow-acting polypeptides from central and peripheral neurones or neuroendocrine cells. Considerable progress has been made over recent years in the understanding at a molecular level of the mechanism of regulated exocytosis, a crucial phase in this phenomenon. The currently proposed overall mechanism, which incorporates the "SNARE" hypothesis for vesicle-membrane docking and fusion, is based on data from experimental models ranging from brain synaptosomes to mast cells. Since the kinetics of the models studied and the physiological effects of the neurotransmitters implicated vary so much, it is pertinent to question whether a general mechanism can be proposed from such experimental data. This review examines known differences in putative exocytotic mechanisms for the various systems studied and attempts to relate these to the nature of the active substances released. Differences exist in each step of the exocytosis process and include the channel through which Ca2+ enters to trigger it or the internal Ca2- source, the type of vesicle in which the transmitter is packaged, the way vesicles are translocated to the surface membrane or how they dock and fuse with it. Major differences have been reported in release mechanisms of different types of vesicle, but minor differences also exist within the same vesicle class. Thus small synaptic vesicles and large dense core vesicles are translocated by distinct processes and the Ca2+ channels, Ca2+ sensors and docking proteins involved in other steps are not identical in all neuronal phenotypes. It may be concluded that each of these differences has evolved to accommodate the different physiological requirements of the neuromodulator released.     

Activation of a retroviral membrane fusion protein: soluble receptor-induced liposome binding of the ALSV envelope glycoprotein

Cellular aspects of remodeling in intact arteries have not been fully investigated, mainly due to the lack of an appropriate methodology that allows for simple measurements. The aim of this study was to develop a method based on laser scanning confocal microscopy (LSCM), compare it with previous methodology, and apply it to the study of remodeling in hypertension. The morphology of mesenteric resistance arteries from stroke-prone spontaneously hypertensive rats (SHRSP) and Wistar-Kyoto rats (WKY) was determined with wire myography on one segment with a standardized diameter setting (0.9[d100]) and with perfusion myography on a second segment from the same artery at the calculated equivalent pressure. The second segments were stained with the nuclear dye Hoechst 33342 (live tissue) or propidium iodide (fixed tissue) and measured with LSCM and MetaMorph software. Compared with wire myography, perfusion myography showed similar differences from those previously reported. Compared with LSCM, perfusion myography showed a similar lumen but significantly smaller wall thickness in both live and fixed tissue, probably due to measurement underestimation. In the study with LSCM, arteries from SHRSP compared with those from WKY showed (1) reduced lumen, (2) altered cell density that was significantly increased in the adventitia, decreased in the media, and unchanged in the intima, (3) significantly increased medial volume, (4) significantly smaller endothelial cell nuclei, and (5) adventitial-like cells in the media. We conclude that (1) LSCM is a reliable and straightforward method to study morphology in intact vessels, (2) it provides new information on the cellular changes in remodeling, (3) adventitia might play an active role in the process of remodeling in hypertension, and (4) endothelium "remodels" in hypertension.     

Automated gaze-based mind wandering detection during computerized learning in classrooms

We investigate the use of commercial off-the-shelf (COTS) eye-trackers to automatically detect mind wandering—a phenomenon involving a shift in attention from task-related to task-unrelated thoughts—during computerized learning. Study 1 (N?=?135 high-school students) tested the feasibility of COTS eye tracking while students learn biology with an intelligent tutoring system called GuruTutor in their classroom. We could successfully track eye gaze in 75% (both eyes tracked) and 95% (one eye tracked) of the cases for 85% of the sessions where gaze was successfully recorded. In Study 2, we used this data to build automated student-independent detectors of mind wandering, obtaining accuracies (mind wandering F₁?=?0.59) substantially better than chance (F₁?=?0.24). Study 3 investigated context-generalizability of mind wandering detectors, finding that models trained on data collected in a controlled laboratory more successfully generalized to the classroom than the reverse. Study 4 investigated gaze- and video- based mind wandering detection, finding that gaze-based detection was superior and multimodal detection yielded an improvement in limited circumstances. We tested live mind wandering detection on a new sample of 39 students in Study 5 and found that detection accuracy (mind wandering F₁?=?0.40) was considerably above chance (F1?=?0.24), albeit lower than offline detection accuracy from Study 1 (F₁?=?0.59), a finding attributable to handling of missing data. We discuss our next steps towards developing gaze-based attention-aware learning technologies to increase engagement and learning by combating mind wandering in classroom contexts.

     

Tuning the Catalytic Preference of Ruthenium Catalysts for Nitrogen Reduction by Atomic Dispersion

Developing cost‐effective, high‐performance nitrogen reduction reaction (NRR) electrocatalysts is required for the production of green and low‐cost ammonia under ambient conditions. Here, a strategy is proposed to adjust the reaction preference of noble metals by tuning the size and local chemical environment of the active sites. This proof‐of‐concept model is realized by single ruthenium atoms distributed in a matrix of graphitic carbon nitride (Ru SAs/g‐C₃N₄). This model is compared, in terms of the NRR activity, to bulk Ru. The as‐synthesized Ru SAs/g‐C₃N₄ exhibits excellent catalytic activity and selectivity with an NH₃ yield rate of 23.0 µg mg_cat^?1 h^?1 and a Faradaic efficiency as high as 8.3% at a low overpotential (0.05 V vs the reversible hydrogen electrode), which is far better than that of the bulk Ru counterpart. Moreover, the Ru SAs/g‐C₃N₄ displays a high stability during five recycling tests and a 12 h potentiostatic test. Density functional theory calculations reveal that compared to bulk Ru surfaces, Ru SAs/g‐C₃N₄ has more facile reaction thermodynamics, and the enhanced NRR performance of Ru SAs/g‐C₃N₄ originates from a tuning of the d‐electron energies from that of the bulk to a single‐atom, causing an up‐shift of the d‐band center toward the Fermi level.     

Mechanistic-based comparisons of stabilised base and granular surface layers of low-volume roads

Granular surface and base layers of low-volume roads (LVRs) are frequently subjected to severe damage that adversely affects safety and requires regular repair and maintenance. Various stabilisation methods have been evaluated for mitigating damage and improving serviceability of LVR systems. However, few well-documented comparisons exist of the field mechanical performance, durability and construction costs of different stabilisation methods under the same set of geological, climate, and traffic conditions. Therefore, the present study was conducted to identify the most effective and economical among several stabilisation methods for repairing or reconstructing granular surface and base layers of LVRs. In this study, a range of promising technologies from a comprehensive literature review was selected and examined using field demonstration sections. A total of nine geomaterials, three chemical stabilisers, and three types of geosynthetics were used to construct various test sections over a 3.22 km stretch of granular-surfaced road. Extensive falling weight deflectometer (FWD) and dynamic cone penetrometer tests were performed to evaluate the multilayered elastic moduli and strengths of the various sections. This paper details the design and construction of each test section, compares the as-constructed mechanistic performance of all test sections, and assesses stiffness changes of several sections one year after construction. To provide a statistical basis for the comparisons, a pairwise multiple-comparison procedure applied for unequal sample sizes and variances and the paired t-test were used to analyse the FWD test results, demonstrating that the performance measures of the various sections were significantly different.     

The effect of pallet top deck stiffness on the compression strength of asymmetrically supported corrugated boxes

During unitized shipment, the components of unit loads are interacting with each other. During floor stacking of unit loads, the load on the top of the pallet causes the top deck of the pallet to bend, which creates an uneven top deck surface resulting in uneven or asymmetrical support of the corrugated boxes. This asymmetrical support could significantly affect the strength of the corrugated boxes, and it depends on the top deck stiffness of the pallet. This study is aimed at investigating how the variations of pallet top deck stiffness and the resulting asymmetric support affect corrugated box compression strength. The study used a scaled-down unit load compression test on quarter-scale pallet designs with different deckboard thicknesses using four different corrugated box designs. Pallet top deck stiffness was determined to have a significant effect on box compression strength. There was a 27%–37% increase in box compression strength for boxes supported by high-stiffness pallets in comparison with low-stiffness pallets. The fact that boxes were weaker on low-stiffness pallets could be explained by the uneven pressure distribution between the pallet deck and bottom layer of boxes. Pressure data showed that a higher percentage of total pressure was located under the box sidewalls that were supported on the outside stringers of low-stiffness pallets in comparison with high-stiffness pallets. This was disproportionately loading one side of the box. Utilizing the effects of pallet top deck stiffness on box compression performance, a unit load cost analysis is presented showing that a stiffer pallet can be used to carry boxes with less board material; hence, it can reduce the total unit load packaging cost.     

The dynamics of prostate specific antigen in hormone refractory prostate carcinoma: an analysis of cancer and leukemia group B study 9181 of megestrol acetate

BACKGROUND: Although many physicians measure serum prostate specific antigen (PSA) during the follow-up of patients with hormone refractory prostate carcinoma (HRPC), little has been done to formalize the determination of how these serial values of PSA impact on prognosis. To understand HRPC fully, make decisions about choices of treatment as well as about clinical research on treatments for HRPC patients, and design appropriate measures of PSA response, it seems that first it would be necessary to understand how these serial measures of PSA relate to survival. The purpose of this study was to determine how repeated measurements of PSA impact on the probability of imminent death for patients with HRPC. METHODS: One hundred forty-eight men with HRPC were enrolled in Cancer and Leukemia Group B Study 9181, in which they were treated with either a low dose (160 mg/day) or a high dose (640 mg/day) of megestrol acetate (MA). Because preliminary data analysis indicated that these treatments had no effect on survival, the authors pooled the data to analyze the overall dynamics of PSA and survival during the follow-up period. The authors attempted to correlate initial and monthly PSA measurements, which were mandated by the study protocol, with the probability of death at any time during follow-up. For statistical analysis, the Cox proportional hazards model and the general linear model were used. In addition to the level of PSA, the authors used the relative velocity of PSA, which was defined as (dy/dt)/y, with "y" symbolizing serum PSA and "t" symbolizing time. RESULTS: Both log(PSA) and the average relative velocity of PSA (rva) were significantly correlated with survival time (P=0.0001 and P=0.0008, respectively), and the analysis performed with the Cox proportional hazards model yielded the following formula for a PSA hazard score: PSA hazard score =0.251*(log(PSA) - mean log(PSA)) + 24.5*(rva - mean rva) This hazard score tended to be higher for patients who were about to die. For example, there was a close correlation between the hazard score and the probability of death as the next observed event. Furthermore, the hazard score provided a dynamic measure of how PSA was affected by treatment. CONCLUSIONS: The average relative velocity of PSA has been identified by the authors as a new measure of the dynamics of PSA in HRPC. It can be determined from sequential values of PSA. This average, together with the log(PSA), are significantly related to the probability of imminent death.