Milling behavior of hulled barley and its thermal and pasting properties

Eight commonly grown Indian hulled barley cultivars were studied for their dehusking, pearling, physico-chemical, β-glucan, pasting and thermal behavior. Milling of the hulled barley at 14% moisture significantly lowered the dehusking and pearling time as compared to milling at 10% moisture content. The extraction rate ranged from 55.05% to 62.35% and significantly (p < 0.05) differed among the cultivars. Particle size distribution of flours was significantly different among the cultivars with flour from RD-2552 and RD-2035 cultivars having the most even particle size distribution. The colour difference (ΔE) was not significantly different among cultivars. The extractable β-glucan content varied from 1.93% to 3.81% among the cultivars and was highest in PL-172. The final pasting viscosity was significantly different among cultivars while the pasting temperature did not vary significantly. The enthalpy (ΔH) of gelatinization of barley flour varied from 4.45 to 7.08 J/g and gelatinization temperature (T_p) varied from 64.23 to 66.26 °C.     

A Novel Oxidation of Valine by N-Bromophthalimide in the Presence of Ruthenium(III) Chloride as a Homogeneous Catalyst

Kinetics of Ruthenium(III) [Ru(III)] chloride catalyzed oxidation of valine (Val) has been studied by N-bromophthalimide (NBP) in the acidic medium at 35 °C. The reaction rate follows first-order and zero-order dependence with respect to [NBP] and [Val]. First-order kinetics was observed for Ru(III) chloride at low range of concentrations and tending towards zero-order at higher concentrations. A negative effect was observed for [H⁺] and [phthalimide], while a positive effect was observed for [Cl^?] on the reaction rate. Hg(OAc)₂, ionic strength (I), and dielectric constant (D) of the medium did not change significantly the reaction rate. The rate constants as a function of temperature (298–318 K) were used to calculate activation parameters of the oxidation of Val by NBP. A plausible mechanism was proposed to explain the results of kinetic studies, reaction stoichiometry and product analysis.     

First X-ray structure of discrete anion [HgBr5]: Synthesis, characterization and single crystal X-ray structure determination of [Co(NH3)6][HgBr5]

A new cobalt(III) complex salt, [Co(NH₃)₆][HgBr₅](1) was crystallized from a solution of hexaamminecobalt(III)bromide and potassium tetrabromomercurate(II) in aqueous medium in 1:1 molar ratio. This complex salt has been characterized by elemental analyses, spectroscopic techniques (e.g. UV/Visible, IR), solubility product and conductance measurements. The complex salt crystallizes in Orthorhombic crystal system with space group Pnma. Single crystal X-ray structure determination revealed the presence of discrete ions: [Co(NH₃)₆]³⁺ cation and a new anion [HgBr₅]³⁻. This is the first structural report of a complex salt containing this new anion. The structure consists of stacks of cations and anions demonstrating supramolecular arrangements through N–HBr hydrogen-bond interactions. The crystal lattice is stabilized by these non-covalent interactions besides electrostatic interaction.     

Swelling kinetics of linseed oil‐based polymers

Kinetics of swelling and sorption behavior of copolymers (based on linseed oil, styrene, divinylbenzene, and acrylic acid via cationic and thermal polymerization) is studied in tetrahydrofuran (THF) at different temperatures. The values of n in the transport equation are found to be below 0.4, showing non‐Fickian or pseudo‐Fickian transport in the polymers. The dependence of diffusion coefficient on the composition and temperature has also been studied for the linseed oil‐based polymers. The diffusion coefficient in cationic samples decreases with an increase in the oil contents in the samples. In case of thermal samples, the diffusion coefficient first increases up to 30% oil contents and then decreases. The diffusion coefficient decreases with an increase in temperature for all of the linseed oil polymer samples. The sorption coefficient increases with an increase in the oil contents for all samples. The crosslink density (calculated from the THF swelling) ranges from 20.16 to 92.34 × 10⁶ mol/cm³ for cationic samples and 20.62 to 86.01 × 10⁶ mol/cm³ for thermal samples. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Swelling kinetics of linseed oil‐based nanocomposites

The solvent‐resistance properties of the montmorillonite‐filled conjugated linseed oil‐based nanocomposites are studied in tetrahydrofuran through equilibrium swelling method at different temperatures. The values of “n” in solvent transport equation are found to be below “0.5,” showing the non‐Fickian diffusion in the polymer. The dependence of the diffusion coefficient on the composition, percentage of clay, and temperature has been studied for nanocomposite samples. The diffusion coefficient increases with an increase in the clay contents and temperature. The crosslink density of the nanocomposites ranges from 101.07 to 237.46 × 10⁶ mol/cm³. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Biocompatibility of polyglycidol with human peripheral blood mononuclear cells

Polyglycidol (PGly), a hyperbranched water‐soluble polyether with numerous terminal hydroxyl groups, has structural similarities with polyethylene glycol. Our laboratory is exploring drug delivery using hyperbranched PGly‐cytokines conjugates. Using human peripheral blood mononuclear cells and a tumor derived human B cell line, HBL‐1; various PGly concentrations were tested for cytotoxicity. Our data indicated that hyperbranched PGly was similar in toxicity to PEG 8000, a commercial polymer. It was concluded that hyperbranched PGly did not exhibit significant cytotoxicity and showed promise for use as a biocompatible polymer. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Properties and mechanism of solar absorber CdTe thin film synthesis by unipolar galvanic pulsed electrodeposition

Electrochemical deposition of CdTe semiconductor thin films over transparent conducting glass substrates by sequential unipolar current pulses is described. The magnitude of pulsed current and pulse periodicity affects the crystalline structure, morphology, optical absorbance and composition of CdTe films. CdTe films formed under high magnitude pulsed current density ~5–15 mA cm⁻² are crystalline with dominant cubic structure having (111) plane oriented parallel to the substrate. Stoichiometric CdTe film growth occurs with current pulses of short 25–300 ms periodicity and 3–50 ms duration. A mechanism of the CdTe growth involving in situ cathodic tellurization process step involving H₂Te formation and reaction with electrochemically deposited Cd monolayer is described. CdTe film growth in the pulsed electrodeposition occurs under mass transport conditions under strong influence of high magnitude pulsed current. This results in much higher growth rates ~5–8 μm h⁻¹ for CdTe films which is attractive for CdTe solar cells in a production environment.     

A new direct coagulation casting process for alumina slurries prepared using poly(acrylate) dispersant

Direct coagulation casting (DCC) of concentrated aqueous alumina slurries prepared using ammonium poly(acrylate) dispersant has been studied using MgO as coagulating agent. Addition of small amounts of MgO increased the viscosity of the concentrated alumina slurries with time and finally transformed it in to a stiff gel. Sufficient working time for degassing and casting could be achieved by cooling the slurries to a temperature of ∼5 °C after proper homogenization after the addition of MgO. The DCC slip with alumina loading in the range of 50–55 vol% showed relatively low viscosity (0.12–0.36 Pa s at shear rate of 93 s⁻¹) and yield stress (1.96–10.56 Pa) values. The wet coagulated bodies prepared from slurries of alumina loading in the range of 50–55 vol% had enough compressive strength (45–211 kPa) for handling during mould removal and further drying. The coagulated bodies prepared from slurries of alumina loading in the range of 50–55 vol% showed linear shrinkage in the range of 4.8–2.3 during drying and 17.1–16.2 during sintering respectively. Near-net-shape alumina components with density >98% TD could be prepared by the DCC process.     

Experimental and Analytical studies of reinforced crushed limestone

This research study aims at investigating the behavior of spread footings on reinforced crushed limestone using laboratory model tests. The model tests were conducted inside a steel box with dimensions of 1.5 m (length) × 0.91 m (width) × 0.91 m (height) using a steel plate with dimensions of 152 mm × 152 mm (6 in. × 6 in.). The parameters investigated include the number of reinforcement layers and the tensile modulus and type of reinforcement. An analytical solution is also developed to estimate the ultimate bearing capacity of reinforced crushed limestone. The test results show that the inclusion of reinforcement can appreciably improve the bearing capacity of crushed limestone up to a factor of 2.85 at a settlement ratio of 10% and reduce the footing settlement down to 75% at a surface pressure of 5500 kPa. The results also demonstrate that reinforcements with higher tensile modulus performed better than reinforcements with lower tensile modulus and that steel reinforcement performed better than geogrid reinforcement. The proposed analytical solution gave a good predication of experimental results of geogrid reinforced sections, while Huang and Menq's solution (1997) gave a good predication for steel reinforced crushed limestone. The analytical results also showed that the reinforced ratio (R_r) should be high enough to form the “deep footing” effect.     

Detection of Chlorophenolic Compounds in Bleaching Effluents of Chemical Pulps

Laboratory bleaching effluents from the chlorination and caustic extraction stages of mixed wood kraft pulp processing have been analysed both qualitatively and quantitatively for various chlorophenolics by using GC.A number of chlorinated derivaties of phenols,catechols,guaiacols and syringaldehydes have been detected and their concentrations are estimated.The results are compared with that of different agriculture residue / hardwood pulps,which were reported in literature.The concentrations of various compounds detected have also been compared with their reported 96LC50 values.