Orange to green switching anthraquinone-based electrochromic material

An easily accessible anthraquinone-benzodithiophene-based high bandgap polymer (PTAq) was synthesized by Stille coupling reactions in remarkably high yield (96.5%). The highest occupied molecular orbital energy level of the polymer was estimated from the onset of oxidation in a cyclic voltammetry study to be −5.7 eV. PTAq showed an orange-to-green color switching with the application of a 1.0-V external potential to the polymer film, which was visible to the naked eye. The optical behavior change was also monitored using ultraviolet–visible absorption spectroscopy and revealed a respectable 75% transmittance change when the polymer film was subjected to a 1.0-V external potential. The high color contrast observed makes PTAq one of the most promising materials for electrochromic device applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47729.     

Interplay of the phase and the chemical composition of the powder feedstock on the properties of porous 8YSZ thermal barrier coatings

Some chemical impurities enhance sintering kinetics of ceramic Thermal Barrier Coatings (TBCs) which can cause their premature failure during operation in gas turbine engine by causing reduction in coating’s strain compliance as well as faster bond-coat oxidation due to increased thermal conductivity. Certain chemical impurities are also believed to suppress resistance to tetragonal to monoclinic phase transformation in 8YSZ, which can also be an important factor regarding TBC’s performance. Most of the impurities and some of the monoclinic phase present in the powder feedstocks can survive into the as-sprayed coating. Therefore, there is a general trend towards OEMs requiring the lowest amounts of chemical impurities and the lowest amounts of monoclinic phase in the powder feedstocks. This paper presents a comprehensive investigation aimed at understanding the role and the relative importance of the chemical and phase purities of the powder feedstock for the properties and performance of thick 8YSZ TBCs.     

Clearance of FGF‐23 during continuous renal replacement therapy

FGF‐23 is a 32 kDa protein that is a key regulator of phosphorus and vitamin D metabolism. Emerging evidence also demonstrates that FGF‐23 increases within 24 hours of acute kidney injury (AKI) and may be associated with adverse clinical outcomes. We conducted this study to evaluate FGF23 clearance during continuous veno‐venous hemofiltration (CVVH) in critically ill patients with AKI. We demonstrate that plasma clearance of FGF‐23 during CVVH is ～11 mL/min and the mean sieving coefficient is 0.27 ± 0.1. Future studies will need to clarify FGF‐23's role in adverse outcomes among AKI patients, and whether therapies aimed at reducing FGF‐23 levels may be beneficial.     

Fabrication of zinc‐loaded hollow glass microspheres (HGMs) for hydrogen storage

The greatest challenge for a feasible hydrogen economy lies on the production of pure hydrogen and the materials for its storage with controlled release at ambient conditions. Hydrogen with its great abundance, high energy density and clean exhaust is a promising candidate to meet the current global challenges of fossil fuel depletion and green house gases emissions. Extensive research on hollow glass microspheres (HGMs) for hydrogen storage is being carried out world‐wide, but the right material for hydrogen storage is yet underway. But many other characteristics, such as the poor thermal conductivity etc. of the HGMs, restrict the hydrogen storage capacity. In this work, we have attempted to increase the thermal conductivity of HGMs by ZnO doping. The HGMs with Zn weight percentage from 0 to 10 were prepared by flame spheroidization of amber‐colored glass powder impregnated with the required amount of zinc acetate. The prepared HGMs samples were characterized using field emission‐scanning electron microscope (FE‐SEM), environmental SEM (ESEM), high‐resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy and X‐ray diffraction (XRD) techniques. The deposition of ZnO on the microsphere walls was observed using FE‐SEM, ESEM and HRTEM which was further confirmed using the XRD and ultraviolet–visible absorption data. The hydrogen storage studies done on these samples at 200 °C and 10‐bar pressure for 5 h showed that the hydrogen storage increased when the Zn percentage in the sample increased from 0 to 2%. The percentage of zinc beyond 2, in the microspheres, showed a decline in the hydrogen storage capacity. The closure of the nanopores due to the ZnO nanocrystal deposition on the microsphere surface reduced the hydrogen storage capacity. The hydrogen storage capacity of HAZn2 was found 3.26 wt% for 10‐bar pressure at 200 °C. Copyright © 2015 John Wiley & Sons, Ltd.     

Breaking a Couple: Disulfide Reducing Agents

Cysteine is present in a large number of natural and synthetic (bio)molecules. Although the thiol side chain of Cys can be in a free form, in most cases it forms a disulfide bond either with a second Cys (bridge) or with another thiol, as in the case of protecting groups. Efficient reduction of these disulfide bridges is a requirement for many applications of Cys-containing molecules in the fields of chemistry and biochemistry. Here we review reducing methods for disulfide bonds, taking into consideration the solubility of the substrates when selecting the appropriate reducing reagent.     

A Mechanism for Carbon Depletion at Bondline of High-Frequency Electric-Resistance-Welded X70 Pipeline Steel

Metallurgical and Materials Transactions A - The bondline of electric-resistance-welded (ERW) linepipe steel, often etched white (i.e., ferrite) in optical microscopy, is generally believed to be...     

Design and computational analysis of a metal hydride hydrogen storage system with hexagonal honeycomb based heat transfer enhancements-part A

In this study, design and performance analysis is carried out for a 10 kWh metal hydride based hydrogen storage system. The system is equipped with distinctive aluminium hexagonal honeycomb based heat transfer enhancements (HTE) having higher surface area to volume ratio for effective heat transfer combined with low system weight addition. The system performance was studied under different operating conditions. The optimum absorption condition was achieved at 35 bar with water at room temperature as heat transfer fluid where up to 90% absorption was completed in 7200 s. The performance of the reactor was observed to significantly improve upon the addition of the HTE network at a minimal system weight penalty.     

Secret Dynamic Key Authentication and Decision Trust Secure Routing Framework for Internet of Things Based WSN

Wireless Personal Communications - Education-as-a-Service is the new proposition of this paper, which intelligence mapped with extracted knowledge from the educational data with the sole objective...     

Energy Efficient Multitier Random DEC Routing Protocols for WSN: In Agricultural

Wireless Personal Communications - Fog computing is an emerging paradigm that provides confluence facilities between Internet of Things (IoT) devices and cloud. The fog nodes process the...