入侵检测技术在消防信息网安全中的应用

消防信息网作为公安网子网,与互联网物理分隔,网络安全相对薄弱,自身的安全防护能力并不高。非法入侵、病毒破坏屡有发生,给消防信息网带来不可预测的后果。     

联络口译远程教学的可行性分析

探讨口译远程培训需求日益增长的原因,并结合远程教育、口译教学的特点分析了目前可用于远程联络口译教学的两种技术,即电话和互联网视频会议系统的优点及其局限性.     

Solid state interfacial reactions in electrodeposited Ni/Sn couples

Ni/Sn couples,prepared by sequentially electroplating Ni layers and Sn layers on metallized Si wafers,were employed to study the mierostructures and growth kinetics of Ni-Sn intermediate phases,when the Ni/Sn couples were aged at room temperature or annealed at temperatures from 150 to 225℃for various times.The results show that the NiSn phase and Ni_3Sn_4 phase are formed,respectively,in the aged couples and annealed couples.The Ni_3Sn_4 layer is continuously distributed between the Ni and Sn sides in t...     

第三产业清洁生产战略研究

结合国内外清洁生产的定义以及服务业的广泛范围，在第三产业清洁生产取得阶段性成果基础上适时提出第三产业开展清洁生产思路，总结归纳符合中国国情的第三产业清洁生产概念与方案，为我国加入WTO与世界接轨后，第三产业的环境与经济协调发展提供重要参考。     

Research on Action Strategies and Simulations of DRL and MCTS-based Intelligent Round Game

International Journal of Control, Automation and Systems - The reinforcement learning problem of complex action control in multiplayer online battlefield games has brought considerable interest in...     

Modeling and Control of Hybrid-driven Gliding Motion for an Underwater Gliding Snake-like Robot

International Journal of Control, Automation and Systems - An underwater gliding snake-like robot (UGSR) combines the advantages of an underwater glider (UG) and an underwater snake-like robot...     

Actuator and Sensor Fault Detection and Isolation for Uncertain Switched Nonlinear System Based on Sliding Mode Observers

International Journal of Control, Automation and Systems - In this paper, we discuss actuator fault and sensor fault detection and isolation (FDI) problems for a class of switched nonlinear systems...     

A brief review on α-zirconium phosphate intercalation compounds and nano-composites

The layer structured zirconium phosphate(Zr P) can be intercalated with atoms, molecules, small organic groups and even polymers. The structures and properties of the Zr P intercalation compounds can be deliberately tuned, leading to promising potential applications in many fields. This article provides a brief review on the experimental results of the Zr P intercalation compounds, with the focus on the polymer/a-zirconium phosphate (α-Zr P) nano-composites. The computer simulations of the Zr P intercalation compounds at the atomic level play a significant role in designing and understanding the properties of Zr P, and in the promotion of the applications of compounds.     

Influence of Cryomilling on the Morphology and Composition of the Oxide Scales Formed on HVOF CoNiCrAlY Coatings

Commercially available, gas-atomized CoNiCrAlY powder was cryomilled to produce powder with nanocrystalline grains. The cryomilled powder and conventional gas-atomized powder were thermally sprayed using the HVOF process to prepare two coatings with fine-grain (～15 nm) and coarse-grain (～1 μm) microstructure, respectively. The two coatings were isothermally oxidized in air at 1000° C for up to 330 hr. The morphology and composition of the oxide scales formed on the two coatings were compared with each other. The results indicate that, while a fine-grain microstructure can promote the formation of a pure alumina layer on the coating by increasing the Al diffusion rate toward the surface, it can also accelerate the Al depletion by increasing the Al diffusion rate toward the substrate, which results in the formation of non-alumina oxides after long-term oxidation. The mechanisms governing the oxide formation are discussed in terms of atomic diffusion and thermodynamic stability.     

Microstructural Investigation of Protective and Non-Protective Oxides on 11% Chromium Steel

FIB, SEM and STEM/EDX were used to investigate X20 stainless-steel samples exposed to dry O₂, or O₂ containing 40% H₂O, with a flow velocity of 0.5 cm/s or 5 cm/s, for 168 hr or 336 hr at 600°C. Thin protective Cr-rich (Cr,Fe)₂O₃ was maintained on the samples exposed to dry O₂, even after 336 hr, and on the sample exposed to O₂/H₂O mixture with the low-flow velocity (0.5 cm/s) for 168 hr. The oxide scale formed in the latter environment contained less Cr, due to Cr loss through CrO₂(OH)₂ evaporation. Breakaway oxidation occurred on the samples exposed in high-gas-flow velocity for shorter time (168 hr) or in low-gas-flow velocity (0.5 cm/s) for longer time (336 hr). The breakaway scales featured a two-layered structure: an outward-growing oxide “island” consisting of almost pure hematite (α-Fe₂O₃), and an inward-growing oxide “crater” consisting of (Cr,Fe)₃O₄. The transition from a thin protective (Cr,Fe)₂O₃ scale to a non-protective thick scale on this martensitic/ferritic steel originated locally and was followed by rapid oxide growth, resulting in a thick scale that covered the whole sample surface.