Non-isotopic in situ hybridization of HPV types in cervical intraepithelial lesions in patients with AIDS

Naturally produced methane shows different delta 13C-values with respect to its origin, e.g., geological or biological. Methane-production of ruminants is considered to be the dominant source from the animal kingdom. Isotopic values of rumen methane--given in literature--range between -80/1000 and -50/1000 and are related to feed composition and also sampling techniques. Keeping cows, camels and sheep under identical feed conditions and sampling rumen gases via implanted fistuale we compared delta PDB 13C-values of methane and CO2 between the species. Referring to mean values obtained from 4 or 5 samples at different times of 11 animals (n = 47) we calculated delta PDB 13C-medians resulting in small but not significant differences within and significant differences between the species for CO2 and methane. The delta PDB 13C-differences between methane and CO2 were statistically equal within and also between the species. Therefore a linear regression of methane values on CO2 is appropriate and leads to: delta PDB 13C(methane)/1000 = 1.57 * delta PDB 13C(CO2)/1000 - 47/1000 with a correlation coefficient of r = 0.87.     

Experimental occlusal interferences. Part IV. Mandibular rotations induced by a pliable interference

In 12 subjects, a pliable, yet unbreakable, intercuspal interference (aluminum shim onlay splint; uniform height of 0.25 mm) was placed between either the right or left maxillary and mandibular second premolars and first molars. During brief and forceful biting (dynamic chewing stroke of about 20 kg force) the interference emulated a semisoft food bolus, and at the end of biting (subsequent static clenching stroke of about 20 kg force) it emulated a rigid metal interference. During dynamic/static biting, rotational electrognathography measured maximum frontal and horizontal plane torque of the right and left mandibular condyles. Eleven subjects (92%) showed frontal plane upward rotation (mean of 1.0 degree) of the condyle contralateral to the interference, and one subject (8%) showed frontal plane upward rotation (0.4 degree) of the condyle ipsilateral to the interference. Two subjects (17%) showed no horizontal plane rotation; seven subjects (58%) showed backward rotation (mean of 0.4 degree) of the condyle contralateral to the interference; and three subjects (25%) showed backward rotation (mean of 0.3 degree) of the condyle ipsilateral to the interference. It is suggested that, in the presence of an occlusal interference, mastication may have both short- and long-term detrimental effects.     

On an evolutionary approach for constrained optimization problem solving

Over the last few decades, many different evolutionary algorithms have been introduced for solving constrained optimization problems. However, due to the variability of problem characteristics, no single algorithm performs consistently over a range of problems. In this paper, instead of introducing another such algorithm, we propose an evolutionary framework that utilizes existing knowledge to make logical changes for better performance. The algorithmic aspects considered here are: the way of using search operators, dealing with feasibility, setting parameters, and refining solutions. The combined impact of such modifications is significant as has been shown by solving two sets of test problems: (i) a set of 24 test problems that were used for the CEC2006 constrained optimization competition and (ii) a second set of 36 test instances introduced for the CEC2010 constrained optimization competition. The results demonstrate that the proposed algorithm shows better performance in comparison to the state-of-the-art algorithms.     

Additive Behavior in Copper Electrorefining

This paper reports on the mode of action of two different organic additives—gelatine and thiourea—during the electrorefining of copper from acid copper sulfate solutions. Gelatine increases the cathode current efficiency and produces smoother deposits up to a certain level of concentration, beyond which, however, these effects are diminished by the steric hinderance of bulky molecular entities adsorbed to the electrode surface. Thiourea decreases the cathode current efficiency when present at concentrations around 5 mg/1. Nonetheless, it improves deposit quality. In higher concentrations, thiourea increases the cathodic current efficiency but also promotes nodule formation and rough deposits. The degradation and/or hydrolysis of both additives and the various interactions with the electrode surface and with cupric ions in solution are also examined.     

Investigating the effect of varying block size on power and energy consumption of GPU kernels

The Journal of Supercomputing - Power consumption is likely to remain a significant concern for exascale performance in the foreseeable future. In addition, graphics processing units (GPUs) have...     

CHL1 encodes a component of the low-affinity nitrate uptake system in Arabidopsis and shows cell type-specific expression in roots

The Arabidopsis CHL1 (AtNRT1) gene confers sensitivity to the herbicide chlorate and encodes a nitrate-regulated nitrate transporter. However, how CHL1 participates in nitrate uptake in plants is not yet clear. In this study, we examined the in vivo function of CHL1 with in vivo uptake measurements and in situ hybridization experiments. Under most conditions tested, the amount of nitrate uptake by a chl1 deletion mutant was found to be significantly less than that of the wild type. This uptake deficiency was reversed when a CHL1 cDNA clone driven by the cauliflower mosaic virus 35S promoter was expressed in transgenic chl1 plants. Furthermore, tissue-specific expression patterns showed that near the root tip, CHL1 mRNA is found primarily in the epidermis, but further from the root tip, the mRNA is found in the cortex or endodermis. These results are consistent with the involvement of CHL1 in nitrate uptake at different stages of root cell development. A functional analysis in Xenopus oocytes indicated that CHL1 is a low-affinity nitrate transporter with a K(m) value of approximately 8.5 mM for nitrate. This finding is consistent with the chlorate resistance phenotype of chl1 mutants. However, these results do not fit the current model of a single, constitutive component for the low-affinity uptake system. To reconcile this discrepancy and the complex uptake behavior observed, we propose a "two-gene" model for the low-affinity nitrate uptake system of Arabidopsis.     

Microstructure and mechanical properties of hot extruded Mg–Al–Mn–Ca alloy produced by rapid solidification powder metallurgy

The microstructure and mechanical properties of hot extruded Mg–Al–Mn–Ca alloy was investigated. Both rapid solidified powders and cast billets were extruded at 573, 623 and 673 K to optimize the processing conditions for obtaining better mechanical response. Powder was consolidated to prepare the extrusion billets using both cold compaction and Spark Plasma Sintering at 473 K. The tensile properties of the extruded alloy were then evaluated and correlated to the observed microstructure. The results show that the use of rapid solidified powder could lead to effective grain refinement, which in turn resulted in the improved mechanical response, especially compared to the extruded conventional cast material.     

Effect of organic loading on a novel hydrogen bioreactor

This study investigated the impact of six organic loading rates (OLR) ranging from 6.5 gCOD/L-d to 206 gCOD/L-d on the performance of a novel integrated biohydrogen reactor clarifier systems (IBRCSs) comprised a continuously stirred reactor (CSTR) for biological hydrogen production, followed by an uncovered gravity settler for decoupling of solids retention time (SRT) from hydraulic retention time (HRT). The system was able to maintain a high molar hydrogen yield of 2.8 mol H₂/mol glucose at OLR ranging from 6.5 to 103 gCOD/L-d, but dropped precipitously to approximately 1.2 and 1.1 mol H₂/mol glucose for the OLRs of 154 and 206 gCOD/L-d, respectively. The optimum OLR at HRT of 8 h for maximizing both hydrogen molar yield and volumetric hydrogen production was 103 gCOD/L-d. A positive statistical correlation was observed between the molar hydrogen production and the molar acetate-to-butyrate ratio. Biomass yield correlated negatively with hydrogen yield, although not linearly. Analyzing the food-to-microorganisms (F/M) data in this study and others revealed that, both molar hydrogen yields and biomass specific hydrogen rates peaked at 2.8 mol H₂/mol glucose and 2.3 L/gVSS-d at F/M ratios ranging from 4.4 to 6.4 gCOD/gVSS-d. Microbial community analysis for OLRs of 6.5 and 25.7 gCOD/L-d showed the predominance of hydrogen producers such as Clostridium acetobutyricum, Klebsiella pneumonia, Clostridium butyricum, Clostridium pasteurianum. While at extremely high OLRs of 154 and 206 gCOD/L-d, a microbial shift was clearly evident due to the coexistence of the non-hydrogen producers such as Lactococcus sp. and Pseudomonas sp.     

Radio resource management for LTE-A relay-enhanced cells with spatial reuse and max–min fairness

One of the major issues in LTE-Advanced (LTE-A) systems is the poor capacity at the cell edge. This is mainly due to the interference experienced by the users as a result of the aggressive frequency reuse usually implemented. Relaying offers an attractive solution for this problem by offering better links than those with the eNodeB (eNB) for the terminals suffering from high path loss or high interference. However, adding relays complicates the resource allocation problem at the eNB and therefore the need for more efficient schemes arises. This is also aggravated by the reuse of resource blocks (RBs) by the relays to fully exploit the scarce spectrum, which, in turn, leads to intra-cell interference. In this paper, we study the joint power and resource allocation problem in LTE-A relay-enhanced cells that exploit spatial reuse. To guarantee fairness among users, a max–min fair optimization objective is used. This complex problem is solved using coordinate ascent and the difference of two convex functions (DC) programming techniques and the proposed scheme indeed converges to a local-optimum quickly. This is shown to be a satisfactory solution according to the simulation results that indicate an almost sevenfold increase in the 10th percentile capacity when compared to previously proposed solutions.     

Technoeconomic study for the optimization of turbine size and wind farm layouts

A technoeconomic analysis and optimization of wind turbine size and layout are performed using WAsP software. A case study of a 100‐MW wind farm located in Egypt is considered. Wind atlas for Egypt was used as the input data of the WAsP software. Two turbine models of powers 52 and 80 MW are considered for this project. The wind turbine size and distributions are selected based on the technoeconomic optimization, namely minimum wake effect, maximum annual energy production (AEP) rate, optimum cash flow, and payback period. The future worth method is adopted in economic comparison between the two alternatives, and the cash flow diagram provided the payback period and future worth after the lifetime of the plant. The results showed that (1) the AEP dramatically decreases for a wind farm area less than 15 km²; (2) the turbine spacing, spacing‐to‐diameter ratio, and the setback distances decrease and the wind turbine density and wake losses increase with decreasing the wind turbines size; (3) the total net AEP using G52 is lower than that of using G80 by about 16%; (4) the technoeconomic analysis recommended using G80 as it has higher profit than those of G52 by about $20 million.