Non-isotopic in situ hybridization of HPV types in cervical intraepithelial lesions in patients with AIDS

Naturally produced methane shows different delta 13C-values with respect to its origin, e.g., geological or biological. Methane-production of ruminants is considered to be the dominant source from the animal kingdom. Isotopic values of rumen methane--given in literature--range between -80/1000 and -50/1000 and are related to feed composition and also sampling techniques. Keeping cows, camels and sheep under identical feed conditions and sampling rumen gases via implanted fistuale we compared delta PDB 13C-values of methane and CO2 between the species. Referring to mean values obtained from 4 or 5 samples at different times of 11 animals (n = 47) we calculated delta PDB 13C-medians resulting in small but not significant differences within and significant differences between the species for CO2 and methane. The delta PDB 13C-differences between methane and CO2 were statistically equal within and also between the species. Therefore a linear regression of methane values on CO2 is appropriate and leads to: delta PDB 13C(methane)/1000 = 1.57 * delta PDB 13C(CO2)/1000 - 47/1000 with a correlation coefficient of r = 0.87.     

Experimental occlusal interferences. Part IV. Mandibular rotations induced by a pliable interference

In 12 subjects, a pliable, yet unbreakable, intercuspal interference (aluminum shim onlay splint; uniform height of 0.25 mm) was placed between either the right or left maxillary and mandibular second premolars and first molars. During brief and forceful biting (dynamic chewing stroke of about 20 kg force) the interference emulated a semisoft food bolus, and at the end of biting (subsequent static clenching stroke of about 20 kg force) it emulated a rigid metal interference. During dynamic/static biting, rotational electrognathography measured maximum frontal and horizontal plane torque of the right and left mandibular condyles. Eleven subjects (92%) showed frontal plane upward rotation (mean of 1.0 degree) of the condyle contralateral to the interference, and one subject (8%) showed frontal plane upward rotation (0.4 degree) of the condyle ipsilateral to the interference. Two subjects (17%) showed no horizontal plane rotation; seven subjects (58%) showed backward rotation (mean of 0.4 degree) of the condyle contralateral to the interference; and three subjects (25%) showed backward rotation (mean of 0.3 degree) of the condyle ipsilateral to the interference. It is suggested that, in the presence of an occlusal interference, mastication may have both short- and long-term detrimental effects.     

关于新建炉EDTA低浓度清洗的探讨

阐述了EDTA清洗锅炉的基本原理,低浓度清洗新建炉的工艺、方法及控制要点,EDTA低浓度清洗与协调EDTA清洗的经济性比较,为新建炉EDTA低浓度清洗探索了方向。     

Residual stress gradients along ion implanted zones — cubic crystals

Large internal strains and stresses can be produced by low temperature implantation over small distances from the free surface in a thick substrate. These are typically non-uniform and have large composition gradients. In dilute bcc solutions, containing unclustered interstitial implants, the residual macroscopic strains may be treated as isotropic. The calculation of residual strain (or stress) is based upon anisotropic elasticity theory and internal stress is given in terms of the dipole tensor for individual defects in single crystal films. In a completely elastic zone, forces act to maintain a rigid outside surface and cause the strain distribution to be zero along directions parallel to the free surface. This produces a strain magnification along the perpendicular direction from Poisson contractions. If the implanted zone is completely relaxed by plastic deformation, the strains are described by the free expansion strains due to both implants and lattice damage. There is no angular dependence of the free expansion strain in this extreme condition. One can determine whether a zone is completely elastic, completely relaxed by plastic deformation, or in some intermediate state from plots of strain against sin², where is the angle of tilt relative to the surface normal. These results may be obtained from X-ray Bragg intensity data by measuring shifts and line broadening from (hkl) planes at different tilt angles. Theoretical results are given for both single crystal and polycrystalline materials in terms of residual strain and stress.     

Feasibility of the indirect determination of blast-induced rock movement based on three new hybrid intelligent models

Engineering with Computers - The indirect and accurate determination of blast-induced rock movement has important significance in the reduction of ore loss and dilution and in the protection of...     

Comparing ANN and GMM in a voice conversion framework

In this paper, we present a comparative analysis of artificial neural networks (ANNs) and Gaussian mixture models (GMMs) for design of voice conversion system using line spectral frequencies (LSFs) as feature vectors. Both the ANN and GMM based models are explored to capture nonlinear mapping functions for modifying the vocal tract characteristics of a source speaker according to a desired target speaker. The LSFs are used to represent the vocal tract transfer function of a particular speaker. Mapping of the intonation patterns (pitch contour) is carried out using a codebook based model at segmental level. The energy profile of the signal is modified using a fixed scaling factor defined between the source and target speakers at the segmental level. Two different methods for residual modification such as residual copying and residual selection methods are used to generate the target residual signal. The performance of ANN and GMM based voice conversion (VC) system are conducted using subjective and objective measures. The results indicate that the proposed ANN-based model using LSFs feature set may be used as an alternative to state-of-the-art GMM-based models used to design a voice conversion system.     

Phase transformations in Mn-Al permanent magnet alloys

Phase transformation studies have been made of the Mn-Al alloys with compositions near the equiatomic range with or without small amounts of carbon, copper and nickel, using differential thermal analysis, X-ray diffraction and optical and electron microscopy. The high temperature hexagonal phase obtained by quenching, transforms to the ferromagnetic phase between 500 and 550° C and on further heating transforms back to the hexagonal phase between 750 and 950° C. Also, on controlled cooling of the phase from about 900° C, the ferromagnetic phase is formed between 800 and 670° C. TEM studies have shown the presence of the B19 ordered phase, ferromagnetic phase and Mn₅Al₈ precipitates even in quenched alloys.     

An efficient algorithm for maxdominance, with applications

Given a planar setS ofn points,maxdominance problems consist of computing, for everyp S, some function of the maxima of the subset ofS that is dominated byp. A number of geometric and graph-theoretic problems can be formulated as maxdominance problems, including the problem of computing a minimum independent dominating set in a permutation graph, the related problem of finding the shortest maximal increasing subsequence, the problem of enumerating restricted empty rectangles, and the related problem of computing the largest empty rectangle. We give an algorithm for optimally solving a class of maxdominance problems. A straightforward application of our algorithm yields improved time bounds for the above-mentioned problems. The techniques used in the algorithm are of independent interest, and include a linear-time tree computation that is likely to arise in other contexts.The research of this author was supported by the Office of Naval Research under Grants N00014-84-K-0502 and N00014-86-K-0689, and the National Science Foundation under Grant DCR-8451393, with matching funds from AT&T.This author's research was supported by the National Science Foundation under Grant DCR-8506361.     

The microbiology of sheep carcasses processed in a modern Indian abattoir

A study has been conducted on the microbiology of sheep carcasses processed in a modern abattoir. The data revealed that careful handling at the different stages of processing of sheep reduced the level of microbial contamination of carcasses. Processing steps such as evisceration and washing did not increase the microbial counts on the carcass surface. Sources of microbial contamination in the abattoir were examined. It was observed that skin, floor washings, intestinal contents and gambrels were the major sources of microbial contamination. Seasonality did not have any effect on the microbial contamination of carcasses. The study revealed that total plate counts in 86·6% of the carcasses ranged between 3·0–4·9log/cm². The counts of coliforms, staphylococci, enterococci and psychrotrophs were low. Pathogens such as Salmonella were not detected. The microbial counts were well within the generally acceptable levels. These findings demonstrated hygienic handling of carcasses. Shoulder and neck are the critical points for microbiological sampling as these sites showed higher microbial counts. Micrococcus and Staphylococcus predominated among microorganisms associated with carcasses. It was noted that differences occurred in microbial types of carcasses processed in tropical and temperate climates. The data generated in a model facility procided useful information for improving meat handling practices.     

Heat transfer to model Newtonian liquid foods in cans during end-over-end rotation

The effect of end-over-end rotation on heat transfer rate to canned Newtonian liquids was studied with two cans (length: diameter $\text{(}\text{L}\text{D}\text{) = 0·73}\text{and}\text{1·37}$) over the range 0–38·6 r.p.m. and radius of rotation 0–14·9 cm. Data were obtained with water, glycerine and 30%, 50%, and 60% sucrose solutions. The agitation induced oscillations of the centre temperature about an increasing average value. The oscillations were more pro-nounced in viscous liquids. The heat transfer coefficient (HTC) was found to be independent of the radius of rotation and $\text{L}\text{D}$. Head space volume between 3 and 9% did not affect the HTC. A correlation was developed in terms of Nusselt, rotational Reynolds, and Prandtl numbers to predict the HTC:

$\text{Nu = 2.9Re}{}^{0.436}\text{Pr}{}^{0.287}$

The characteristic dimension in Nu and Re was the radius of rotation. This correlation, with R² = 92%, is valid for Re: 83 ? 2·1 × 10⁵ and Pr: 2·8 ? 49. Attempts to improve the correlation by incorporating the Grashof number, $\text{L}\text{D}$ and head space volume as well as other characteristic dimensions were not successful.