Cross-comparison of fast reactor concepts with various coolants

Four fast reactor concepts using lead (LFR), liquid salt, NaCl-KCl-MgCl₂ (LSFR), sodium (SFR), and supercritical CO₂ (GFR) coolants are compared. Since economy of scale and power conversion system compactness are the same by virtue of the consistent 2400 MWt rating and use of the S-CO₂ power conversion system, the achievable plant thermal efficiency, core power density and core specific powers become the dominant factors. The potential to achieve the highest efficiency among the four reactor concepts can be ranked from highest to lowest as follows: (1) GFR, (2) LFR and LSFR, and (3) SFR. Both the lead- and salt-cooled designs achieve about 30% higher power density than the gas-cooled reactor, but attain power density 3 times smaller than that of the sodium-cooled reactor. Fuel cycle costs are favored for the sodium reactor by virtue of its high specific power of 65 kW/kgHM compared to the lead, salt and gas reactor values of 45, 35, and 21 kW/kgHM, respectively. In terms of safety, all concepts can be designed to accommodate the unprotected limiting accidents through passive means in a self-controllable manner. However, it does not seem to be a preferable option for the GFR where the active or semi-passive approach will likely result in a more economic and reliable plant. Lead coolant with its superior neutronic characteristics and the smallest coolant temperature reactivity coefficient is easiest to design for self-controllability, while the LSFR requires special reactivity devices to overcome its large positive coolant temperature coefficient. The GFR required a special core design using BeO diluent and a supercritical CO₂ reflector to achieve negative coolant void worth—one of the conditions necessary for inherent shutdown following large LOCA. Protected accidents need to be given special attention in the LSFR and LFR due to the small margin to freezing of their coolants, and to a lesser extent in the SFR.     

Evaluating the Use of Daily Care Notes Software for Older People with Dementia

There has been little research to investigate the impact of software to support the care for older people with dementia care. This article reports the evaluation of software adapted to support one key person-centered task for the care of older residents with dementia – recording and sharing daily care notes. The evaluation on the dementia wing of 1 residential home for over 6 months revealed that use of the software on mobile devices carried by the carers increased the number and volume of daily care notes recorded, but only for the types of content that were already being recorded by carers. Carers reported more advantages that resulted from daily care notes once in digital form than from the documenting task, as well as barriers to the use of mobile digital software to record daily care notes.     

Processing of observed pupil size modulates perception of sadness and predicts empathy.

Facial autonomic responses may contribute to emotional communication and reveal individual affective style. In this study, the authors examined how observed pupillary size modulates processing of facial expression, extending the finding that incidentally perceived pupils influence ratings of sadness but not those of happy, angry, or neutral facial expressions. Healthy subjects rated the valence and arousal of photographs depicting facial muscular expressions of sadness, surprise, fear, and disgust. Pupil sizes within the stimuli were experimentally manipulated. Subjects themselves were scored with an empathy questionnaire. Diminishing pupil size linearly enhanced intensity and valence judgments of sad expressions (but not fear, surprise, or disgust). At debriefing, subjects were unaware of differences in pupil size across stimuli. These observations complement an earlier study showing that pupil size directly influences processing of sadness but not other basic emotional facial expressions. Furthermore, across subjects, the degree to which pupil size influenced sadness processing correlated with individual differences in empathy score. Together, these data demonstrate a central role of sadness processing in empathetic emotion and highlight the salience of implicit autonomic signals in affective communication. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Generation and context memory.

Generation enhances memory for occurrence but may not enhance other aspects of memory. The present study further delineates the negative generation effect in context memory reported in N. W. Mulligan (2004). First, the negative generation effect occurred for perceptual attributes of the target item (its color and font) but not for extratarget aspects of context (location and background color). Second, nonvisual generation tasks with either semantic or nonsemantic generation rules (antonym and rhyme generation, respectively) produced the same pattern of results. In contrast, a visual (or data-driven) generation task (letter transposition) did not disrupt context memory for color. Third, generating nonwords produced no effect on item memory but persisted in producing a negative effect on context memory for target attributes, implying that (a) the negative generation effect in context memory is not mediated by semantic encoding, and (b) the negative effect on context memory can be dissociated from the positive effect on item memory. The results are interpreted in terms of the processing account of generation. The original, perceptual-conceptual version of this account is too narrow, but a modified processing account, based on a more generic visual versus nonvisual processing distinction, accommodates the results. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Cellulose-binding domains: potential for purification of complex proteins

The endoglucanase CenA and the exoglucanase Cex from Cellulomonasfimi each contain a discrete cellulose-binding domain (CBD),at the amino-terminus or carboxyl-terminus respectively. Thegene fragment encoding the CBD can be fused to the gene of aprotein of interest. Using this approach hybrid proteins canbe engineered which bind reversibly to cellulose and exhibitthe biological activity of the protein partner. Alkaline phosphatase(PhoA) from Escherichia coli, and a ß-glucosidase(Abg) from an Agrobacterium sp. are dimeric proteins. The fusionpolypeptides CenA-PhoA and Abg-CBC_cex are sensitive to proteolysisat the junctions between the fusion partners. Proteolysis resultsin a mixture of homo- and heterodimers; these bind to celluloseif one or both of the monomers carry a CBD, e.g. CenA-PhoA/CenA-PhoAand CenA-PhoA/PhoA. CBD fusion polypeptides could be used inthis way to purify polypeptides which associate with the fusionpartner.     

The importance of wet-powder dynamic mechanical properties in understanding granulation

Granule impact deformation has long been recognised as important in determining whether or not two colliding granules will coalesce. Work in the last 10 years has highlighted the fact that viscous effects are significant in granulation. The relative strengths of different formulations can vary with strain rate. Therefore, traditional strength measurements made at pseudo-static conditions give no indication, even qualitatively, of how materials will behave at high strain rates, and hence are actually misleading when used to model granule coalescence. This means that new standard methods need to be developed for determining the strain rates encountered by granules inside industrial equipment and also for measuring the mechanical properties of granules at these strain rates. The constitutive equations used in theoretical models of granule coalescence also need to be extended to include strain-rate dependent components.     

Microwave Dielectric Properties of Gallium-Doped Hexagonal Barium Titanate Ceramics

High-permittivity and low-loss ceramics with composition BaTi_0.92Ga_0.08O_2.96 have been prepared in the BaO–Ga₂O₃–TiO₂ system using the mixed-oxide route. This compound forms as the hexagonal polymorph (6 H ) of BaTiO₃ with the space group P 6₃/ mmc . The dielectric properties of dense ceramics have been studied, at microwave frequencies, with the ceramics fired at 1450°C under flowing oxygen gas; the results are a relative permittivity, ɛ_r, of ∼74 and a quality factor, Q · f _r, of ∼7815 at 5.5 GHz. The quality factor is strongly influenced by the sintering conditions (temperature and atmosphere), whereas the relative permittivity is not influenced significantly by ceramic processing for pellets ≥93% of the theoretical X-ray density. To our knowledge, this is the first report of microwave dielectric resonance in a perovskite-type BaTiO₃-based ceramic.     

Oxidative degradation of polyamide reverse osmosis membranes: Studies of molecular model compounds and selected membranes

Selected aromatic amides were used to model the chemical reactivity of aromatic polyamides found in thin‐film composite reverse osmosis (RO) membranes. Chlorination and possible amide bond cleavage of aromatic amides upon exposure to aqueous chlorine, which can lead to membrane failure, were investigated. Correlations are made of the available chlorine concentration, pH, and exposure time with chemical changes in the model compounds. From the observed reactivity trends, insights are obtained into the mechanism of RO membrane performance loss upon chlorine exposure. Two chemical pathways for degradation are shown, one at constant pH and another that is pH‐history dependent. An alternative strategy is presented for the design of chlorine‐resistant RO membranes, and an initial performance study of RO membranes incorporating this strategy is reported. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1173–1184, 2003     

Effect of the OH Radical Scavenger Hydrogen Peroxide on Secondary Organic Aerosol Formation from α-Pinene Ozonolysis

Hydrogen peroxide (HOOH) is a potentially valuable hydroxyl radical (OH) scavenger in secondary organic aerosol experiments focused on ozonolysis yields. Here, we present results for α-pinene ozonolysis. The OH scavenging produces solely HO₂ radicals and the resulting high [HO₂]/[RO₂] ratio causes an increase in aerosol formation from α-pinene ozonolysis, compared to experiments performed with butanol OH scavengers. The majority of the increase comes in the 100 μg m^?3 volatility range, suggesting that instead of more volatile products formed under higher RO₂ conditions, less volatile, multifunctional hydroperoxides form under the high-HO₂ conditions here. This dependence on the [HO₂]/[RO₂] ratio can be parameterized in a similar fashion to the way high- and low-NO _x yields are currently treated in models.     

SMALL-SCALE RECOVERY AND SEPARATION OF ACTINIDES USING TRI-n-BUTYL PHOSPHATE EXTRACTION CHROMATOGRAPHY

The small-scale recovery and separation of the actinides U, Np, Pu and Am using the commercial product, Lewatit OC 1023. has been studied. Conditions under which these actinides may be extracted or eluted and methods for separation of any combination of these elements are presented. A separation scheme for all four actinides achieved complete separation of Np from U and Am from Pu and U. Good separation of U, Np and Pu was achieved. Quantitative separation is possible by repeating the procedure.

Since Np and Am follow one another in the above scheme, a further procedure for their quantitative separation is presented.

Reductants investigated for separation of Pu from U were ferrous sulfamate and hydroxylamraonium nitrate. The latter is only effective if small amounts of U are present.

The behaviour of Ru and Zr under the conditions for the separation of U, Np, Pu and Am was also investigated The behaviour of these two troublesome elements was shown to be similar to that in the purex process.