Coating of hydroxyapatite on metal plates using thermal dissociation of calcium-EDTA chelate in phosphate solutions under hydrothermal conditions

Coating of hydroxyapatite on various metal plates was carried out by a homogeneous precipitation technique using hydrothermal reactions in Ca(edta)^2-–NaH₂PO₄ at 140–200°C and pH 3.4–10.0. Hydroxyapatite films were formed on the surface of the iron plates in solutions at an initial pH above 4.7, whereas aggregates consisting of needle-like hydroxyapatite crystal radiating from a point in the form of flower deposited as islands on the surface of aluminum, copper and titanium plates. The upper part of the film formed on the surface of the iron plates consisted of needle-like hydroxyapatite particles whereas the bottom of the film consisted of spherical hydroxyapatite particles. The length of the needle-like hydroxyapatite particles increased with decreasing concentration of Ca(edta)^2-.     

Delayed neurological symptoms from the spontaneous migration of a bullet in the lumbosacral spinal canal. Case report

In a patient wounded by a gunshot in the abdomen, the bullet was radiologically located intradurally at S1 level. Although she had no neurological deficit at admission, she developed pain and motor weakness a few days later. At operation the bullet was found at L4 level and its removal resulted in complete neurological recovery.     

Further evidence of responsibility of impurities in MgO for variability in its basicity and catalytic performance in oxidative coupling of methane

Further evidence was delivered that certain impurities, which could be contained in MgO samples, might be responsible for observed variability in MgO basicity and catalytic performance in oxidative coupling of methane. The surface basicity/base strength distribution of a series of MgO samples containing or not containing Ca and Na impurities was determined by a temperature-programmed desorption of CO₂. It was revealed that samples containing Ca and Na impurities have much more medium, strong and very strong basic sites. The surface basicity of MgO samples containing added alkali or alkaline earth compounds or water was characterized by a test reaction of transformation of 2-butanol. It was confirmed that the introduction of these compounds to a pure MgO enhanced both its basicity and activity in oxidative coupling of methane.     

A high-speed halftoning processor for raster scanned images

A high-speed bilevel reproduction algorithm, called modified error diffusion (MED) algorithm, has been developed to provide high-quality halftoning images for continuous tone images and has been implemented in a CMOS LSI chip. The chip has been designed with standard-cell 1.5-μm CMOS technology using an optimum layout design. The chip has achieved a maximum processing speed of 60 ns/pixel     

Characterization of charge trapping in submicrometer NMOSFET's bygate capacitance measurements

Trapping of net positive charge at low gate stress voltage, and of net negative charge at high gate stress voltage, is observed through changes in the gate-to-drain capacitance of the stressed junction. These observations can be explained in terms of electron trapping, hole trapping, and generation of acceptor-like interface states located in the upper half of the bandgap. Channel shortening is also observed and found to exhibit a logarithmic time dependence     

Acicular ferrite transformation in deformed austenite of an alloy-steel weld metal

The effect of different amounts (5, 10 and 15%) of compressive deformation of austenite on the isothermal transformation of acicular ferrite in an alloy-steel weld metal has been investigated. It was found that prior deformation of austenite significantly enhanced acicular ferrite transformation. At the same isothermal transformation temperature, as a higher amount of prior deformation was applied, a greater quantity of acicular ferrite could be obtained and the size of acicular ferrite plates became much finer. These results implied that the effective nucleation sites of acicular ferrite increased with increasing amount of prior deformation. The other results also emphasized that the accumulated strain (due to prior deformation of austenite) could trigger acicular ferrite to nucleate on inclusions at high temperatures, where undeformed austenite remained stable. The acicular ferrite start temperature was found to be raised continuously by increasing the amount of prior deformation of austenite. Further evidence suggests that the application of deformation can boost the driving force for acicular ferrite formation. This phenomenon is similar to the case in which martensite forms under the influence of deformation.     

A neural network compensator for uncertainties of roboticsmanipulators

A neural network controller for trajectory control of robotic manipulators that is used not to internalize the inverse dynamic model of the controlled object but to compensate only the uncertainties of the robotic manipulator is presented. Its performance is compared with that of the conventional adaptive scheme. The results show the ability of the neural network controller to adapt to unstructured effects. A learning method for the neural network compensator with true teaching signals is shown. The tracking error of the robotic manipulator was greatly reduced when this controller was used     

Surgical treatment of aneurysms of the left ventricle. Immediate and long-term results. Apropos of a consecutive series of 121 cases

From 1978 to 1992, 121 cases of postinfarction left ventricular aneurysm (99 males, 22 females, mean age 60 years) were operated on. The authors insist on a high rate of clinical arhythmogenicity (31.4%) and associated mechanical complications (21%). 76% of patients were in functional NYHA class III or IV. Resection was performed in 90% of patients, plication in 10%. 58% underwent coronary artery bypass grafting (1.7 graft/patient), 16% encircling ventriculotomy, 8% mitral valve replacement and 13% closure of ventricular septal defect. Operative mortality was 14.9% (10% when other mechanical complications where excluded). 5-year survival is 67.9%. Late cardiac deaths are as follow: left ventricular failure (1.8% A/P), Sudden death (1.4% A/P), Myocardial infarction (0.6% A/P). 82% of survivals are in functional NYHA class I or II. Only functional class NYHA III or IV is predictive of late death. We conclude that postinfarction left ventricular aneurysm remains a high risk complication especially when associated with other mechanical complications. When arhythmogenicity is present we suggest rhythmologic surgery and in all cases, complete revascularization.     

Morphology of thin anatase coatings prepared from alkoxide solutions containing organic polymer,affecting the photocatalytic decomposition of aqueous acetic acid

Porous anatase coatings were prepared from alkoxide solutions containing organic polymer by a dip-coating technique. The morphology of the coatings, such as pore size, pore distribution and thickness, was controlled. The effects of the morphology of the porous anatase coatings on the photocatalytic activity for the photocatalytic decomposition of aqueous acetic acid were examined.