Superficial hemangiomas: associations and management

A new design of single tooth implant (AstraTech, Molndal Sweden) featuring a microthreaded conical neck and TiO blast surface was evaluated clinically and radiographically after 2 years in function. Fifteen patients (age range 16 to 48) with missing maxillary anterior teeth (6 central incisors, 8 laterals, 1 bicuspid) had 4, 13 mm and 11, 15 mm implants placed under local anaesthesia and left for a period of 6 months before exposure and abutment connection/crown fabrication. All patients were seen at 4 to 6 monthly intervals for hygienist maintenance. Radiographs using Rinn holders and a long cone technique were taken at the crown insertion and after 1 year (14 subjects) and 2 years (12 subjects). All implants were successfully integrated at stage 2, and no implants have been lost. The internal conical seal design of the abutment/implant interface facilitated connection and there were no cases of abutment screw loosening. No soft tissue problems were observed, and the gingival morphology/health was well maintained. One crown was recemented after 18 months in function, and 1 crown was replaced because of a fracture to the porcelain incisal edge. At crown insertion, the mean bone level was 0.46 to 0.48 mm apical to the top of the implant and there were no statistically significant changes in the bone level over the 2 years of the study. In conclusion, the single tooth Astra implants were highly successful and bone changes within the first 2 years of function were comparable with other systems reporting high long-term success rates.     

4- and 13-GHz tuned amplifiers implemented in a 0.1-μm CMOStechnology on SOI, SOS, and bulk substrates

Four- and 13-GHz tuned amplifiers have been implemented in a partially scaled 0.1-1 μm CMOS technology on bulk, silicon-on-insulator (SOI), and silicon-on-sapphire (SOS) substrates. The 4-GHz bulk, SOI, and SOS amplifiers exhibit forward gains of 14, 11, and 12.5 dB and F_min's of 4.5 (bulk) and 3.5 db (SOS). The 13-GHz SOS and SOI amplifiers exhibit gains of 15 and 5.3 dB and F_unn's of 4.9 and 7.8 dB. The 4-GHz bulk amplifier has the highest resonant frequency among reported bulk CMOS amplifiers, while the 13-GHz SOS and SOI amplifiers are the first in a CMOS technology to have tuned frequencies greater than 10 GHz. These and other measurement results suggest that it may be possible to implement 20-GHz tuned amplifiers in a fully scaled 0.1-1 μm CMOS process     

Air-atomized iron powders — past, present, future

This article examines the history and future prospects of the production of iron powders by the atomizing high-carbon melts with compressed air. In terms of their properties, the iron powders obtained by this method are intermediate between water-atomized powders and reduced powders. They can be used to make anti-friction products or structural elements having a density within the range 6.3–6.9 g/cm³. The outlook for these powders is promising in Russia because they are needed for machine construction, especially in the auto industry.     

On studying methods for cleaning dielectric oil for impregnation of high-voltage pulse capacitors with film dielectric

Methods for cleaning commercial T-1500 dielectric oil with different adsorbents are studied. The oil is intended for impregnation of high-voltage pulse capacitors with film dielectric.     

Computer characterization of debris clouds resulting from hypervelocity impact

A computational study to examine the effects of parameter variation on debris cloud formation and perforation behavior in a simple sphere-plate impact situation is described. The parameters varied were impact velocity, thickness: diameter ratio, projectile-target material combination and number of plates. In particular, effects associated with changes from strength-dominated to hydrodynamic behavior were considered.     

Multi-vane expander performance: Breathing characteristics

The throttling of the working fluid flow at the inlet and exhaust port openings of multi-vane expanders leads to power losses. Therefore, a mathematical model has been developed to analyse their breathing characteristics. In particular two existing designs of multi-vane expanders, using refrigerant 113 as the working fluid, were considered. The results obtained indicate that multi-vane expanders exhibit easy-breathing behaviours. Improved breathing characteristics can be achieved by the wise selection of operating conditions for any existing design or by optimising the design parameters for a specific application.     

Development of a Cyclogyro-Based Flying Robot With Variable Attack Angle Mechanisms

This paper presents an experimental study on the development of a cyclogyro-based flying robot with a new variable angle of attack mechanism. A cyclogyro is a flying machine supported in the air by power-driven rotors that rotate about a horizontal axis, like the paddle-wheels of a steamboat. Machines of this type have been designed by some companies but there has been no record of any successful flights. Our design starts with a new variable angle of attack mechanism with an eccentric (rotational) point in addition to a rotational point connecting to a motor. The main feature of the mechanism with the eccentric rotational point is the ability to change attack of angles in accordance with the wing positions (as determined by the rotational angles of the cyclogyro) without actuators. The design parameters (wing span, the number of wings, and eccentric distance) of the flying robot are determined through a series of experiments. Experimental results show that the cyclogyro-based flying robot with the new variable angle of attack mechanism is capable of generating sufficient lift force for flying.     

Protein-lipid interactions in concentrated infant formula

Radiolabeled milk proteins ([carbon-14] beta-lactoglobulin or [carbon-14] kappa-casein) were added to raw skim milk used to prepare concentrated humanized infant formula. Ultracentrifugation of the sterilized product allowed separation of three fractions: lipids and the proteins associated with them; free casein micelles and other dense particles; and the fluid phase. Distribution of radiolabeled tracer proteins or of protein measured by chemical methods among these three phases varied significantly with differences in processing conditions (time and temperature of sterilization) or amount of certain additives (potassium hydroxide or urea). In the range of 0 to 8 meq/L of potassium hydroxide added to the formula after homogenization but before sterilization, the lipid layer content of carbon-14 from [carbon-14] kappa-casein in the sterilized product decreased by 4.7% for each 1 meq/L of added potassium hydroxide. Lipid layer content of protein decreased by 2 g/L (of a total of 32 g/L) for each 1 meq/L potassium hydroxide. Such differences in the structure of the product, related to interactions of protein with lipid, protein, or calcium phosphate, may correlate with physical properties and stability of milk-based lipid-rich products.