The microstructure of Cu films deposited by the self-ion assisted technique

The microstructures of Cu films deposited by the self-ion assisted, partially ionized beam (PIB) deposition technique under two different accelerating potentials, 0 KeV and 6 KeV, are compared. The 6 KeV film shows a bimodal (111) fiber and (100) fiber texture with an abundance of twin boundaries and a relatively large average grain size with a typical lognormal distribution. The 0 KeV film consists of small, mostly (111) oriented grains with islands of abnormally large (100) grains. The controlling factors for the abnormal growth of the (100) grains are discussed in relation to the observed microstructures, showing that all factors necessary for abnormal (100) growth are present in the films.     

Massive transformation and absolute stability

Under carefully chosen conditions, solidification theory may be applied to solid-state transformations, and this has been done here for composition-invariant diffusion transformations. The predictions of the modeling are compared with isovelocity experiments in two iron systems, Fe-7.29 wt pct Cr and Fe-3.1 wt pct Ni. The ferrite to austenite phase transformation is used to demonstrate that stabilization of a planar transformation front at absolute stability is the natural lower velocity limit for a composition-invariant (massive) transformation. The results of the model, which includes nonequilibrium effects, clearly show that steady-state plane-front growth leading to composition invariance can be obtained at various temperatures depending on the growth velocity. In the lower velocity range, at the limit of absolute stability (of the order of 10 μm/s in the systems studied), the transformation interface moves under conditions of local equilibrium, and the temperature corresponds to the lower solvus temperature. At higher velocity (of the order of the interface diffusion rate, which in these systems is of the order of cm/s), the transformation is predicted to proceed at temperatures close to T ₀. At even higher rates, atom attachment kinetic undercooling will decrease the transformation temperature with respect to T ₀. In some cases, this temperature might even drop below the lower solvus. This article is based on a presentation made at the symposium entitled “The Mechanisms of the Massive Transformation,” a part of the Fall 2000 TMS Meeting held October 16–19, 2000, in St. Louis, Missouri, under the auspices of the ASM Phase Transformations Committee.     

Announcement

Samples of nine different fruits grown in Oyo State of Nigeria were obtained from different market locations within Ibadan Municipality and analysed for their vitamin C content. Sweet orange was found to contain the highest amount of vitamin C ($\text{56·0}\text{mg}\text{100}\text{g}$ edible portion) whilst sweet banana variety II contained the lowest amount ($\text{9·4}\text{mg}\text{100}\text{g}$ edible portion). Lime, grapefruit, pawpaw and ‘agbalumo’ were found to contain considerable amounts of vitamin C, having 46·5, 47·0, 43·2 and $\text{48·0}\text{mg}\text{100}\text{g}$ respectively. Consumption of these fruits would thus meet the nutritional requirement for vitamin C in this part of Nigeria. It is also recommended that sweet orange, agbalumo, grapefruit, lime and pawpaw, found to contain considerable amounts of vitamin C, should be processed either at home or factory level to make them available to the people all year round.     

A STUDY OF THE PRIMARY PHASE OF FOOD FREEZE-DRYING IN VACUO

In the development of a novel freeze-drying technique in a fluidized bed at atmospheric pressure, a parallel study was undertaken using a conventional vacuum equipment. Two kinetically distinct phases were observed during freeze drying of representative Pood samples:

(1) a period during which the rate of drying was constant and (2) a second period during which the drying rate sufferedcontinual reduction. This paper focused attention on the primary drying period which corresponded with the kinetics of sublimation of pure     

测定钠中杂质的手动阻塞计的研究

文章介绍了测定钠中杂质浓度的手动阻塞计的原理、装置和实验结果。为了减少测量误差,我们研究了影响准确测定阻塞温度的因素,并且找到了减少测量误差的办法。在同样的杂质饱和温度下,该阻塞计测得的高、低阻塞温度所对应的杂质浓度差是很接近的。对氧其差值为1.03ppm;对氢为0.0763ppm。     

Multifactor Experiments under Superdeep-Penetration Conditions

Consideration is given to the possibility of controlling the efficiency of the process of superdeep penetration of a high-velocity microstriker flux into metal obstacles due to the employment of ballast elements in the jet and to additional supply of energy in compression by an explosive charge along the external perimeter.