Extraction of physical Schottky parameters using the Lambert function in Ni/AlGaN/GaN HEMT devices with defined conduction phenomena

Electrical characterization analyses are proposed in this work using the Lambert function on Schottky junctions in GaN wide band gap semiconductor devices for extraction of physical parameters. The Lambert function is used to give an explicit expression of the current in the Schottky junction. This function is applied with defined conduction phenomena, whereas other work presented arbitrary (or undefined) conduction mechanisms in such parameters'' extractions. Based upon AlGaN/GaN HEMT structures, extractions of parameters are undergone in order to provide physical characteristics. This work highlights a new expression of current with defined conduction phenomena in order to quantify the physical properties of Schottky contacts in AlGaN/GaN HEMT transistors.     

Noncoherent space-time coding: An algebraic perspective

The design of space-time signals for noncoherent block-fading channels where the channel state information is not known a priori at the transmitter and the receiver is considered. In particular, a new algebraic formulation for the diversity advantage design criterion is developed. The new criterion encompasses, as a special case, the well-known diversity advantage for unitary space-time signals and, more importantly, applies to arbitrary signaling schemes and arbitrary channel distributions. This criterion is used to establish the optimal diversity-versus-rate tradeoff for training based schemes in block-fading channels. Our results are then specialized to the class of affine space-time signals which allows for a low complexity decoder. Within this class, space-time constellations based on the threaded algebraic space-time (TAST) architecture are considered. These constellations achieve the optimal diversity-versus-rate tradeoff over noncoherent block-fading channels and outperform previously proposed codes in the considered scenarios as demonstrated by the numerical results. Using the analytical and numerical results developed in this paper, nonunitary space-time codes are argued to offer certain advantages in block-fading channels where the appropriate use of coherent space-time codes is shown to offer a very efficient solution to the noncoherent space-time communication paradigm.     

Mutual Coupling Reduction in Patch Antenna Arrays by Using a Planar EBG Structure and a Multilayer Dielectric Substrate

Periodic structures can help in the reduction of mutual coupling by using their capability of suppressing surface waves propagation in a given frequency range. The purpose of this work is to show the viability of using a planar electromagnetic band gap (EBG) structure based on a truncated frequency selective surface (FSS) grounded slab to this aim. The goal is to use it in patch antenna arrays, keeping both the element separation smaller than for grating lobes avoidance (assuming broadside case) and the patch antenna size large enough to have a good antenna directivity. To this aim, a multilayer dielectric substrate composed of high and low permittivity layers is convenient. This allows the use of a planar EBG structure made of small elements printed on the high permittivity material and, at the same time, the low permittivity layer helps the bandwidth and the directivity of the antenna to be increased. The EBG structure was designed under these premises and optimized for the particular application via an external optimization algorithm based on evolutionary computation: ant colony optimization (ACO). The mutual coupling reduction has been measured and it is larger than 10 dB with a completely planar structure.     

FlowMate: scalable on-line flow clustering

We design and implement an efficient on-line approach, FlowMate, for clustering flows (connections) emanating from a busy server, according to shared bottlenecks. Clusters can be periodically input to load balancing, congestion coordination, aggregation, admission control, or pricing modules. FlowMate uses in-band (passive) end-to-end delay measurements to infer shared bottlenecks. Delay information is piggybacked on feedback from the receivers, or, if impossible, TCP or application round-trip time estimates are used. We simulate FlowMate and examine the effects of network load, traffic burstiness, network buffer sizes, and packet drop policies on clustering correctness, evaluated via a novel accuracy metric. We find that coordinated congestion management techniques are more fair when integrated with FlowMate. We also implement FlowMate in the Linux kernel v2.4.17 and evaluate its performance on the Emulab testbed, using both synthetic and tcplib-generated traffic. Our results demonstrate that clustering of medium to long-lived flows is accurate, even with bursty background traffic. Finally, we validate our results on the Internet Planetlab testbed.     

Electrical characterization of HfO2 films obtained by UV assisted injection MOCVD

HfO₂ films were deposited at low temperature (400 °C) by UV assisted injection metal-organic chemical vapor deposition (UVI-MOCVD). A three-step process was used for this study, consisting of (A) Pre-deposition anneal for nitridation; (B) Deposition step; (C) Post-deposition annealing in oxygen. Special attention was paid to the effect of UV exposure during these steps. Films were characterized by physical, optical and electrical techniques. Thickness was determined by different methods (X-ray Reflectrometry (XRR), spectroscopic ellipsometry and transmission electron microscopy) and a good agreement was found for all samples. The HfO₂ permittivity, equivalent oxide thickness (E_OT), flat-band voltage (V_fb) and total charge (Q_t) were extracted from the CV response at high frequency taking into account the HfO₂ and SiO₂ thicknesses obtained by XRR. The calculated permittivity values were in the range 7–13, i.e. lower than theoretical values for the monoclinic phase. Explanations are suggested in the context of the other characterizations. JE_eff characteristics were constructed taking into account the E_OT values (E_eff = V/E_OT). Effective breakdown fields range between 8.7 and 16.9 MV/cm. No dependence of E_eff with UV exposure was found.     

Ka-band analog front-end for software-defined direct conversion receiver

A six-port Ka-band front-end architecture based on direct conversion for a software-defined radio application is proposed in this paper. The direct conversion is accomplished using six-port technology. In order to demodulate various phase-shift-keying/quadrature-amplitude-modulation (PSK/QAM) modulated signals at a high bit rate, a new analog baseband circuit was specially designed according to the I/Q equations presented in the theoretical part. An experimental prototype has been fabricated and measured. Simulation and measurement results for binary PSK, quaternary PSK (QPSK), 8 PSK, 16 PSK, and 16 QAM modulated signals at a bit rate up to 40 Mb/s are presented to validate the proposed approach. A software-defined radio can be designed using the new front-end and only two analog-to-digital converters (ADCs) because the I/Q output signals are generated by analog means. Previous six-port receivers make use of four ADCs to read the six-port dc levels and require digital computations to generate the I/Q output signals. With the proposed approach, the load of the signal processor will therefore be reduced and the modulation speed can be significantly increased using the same digital signal processor.     

High-speed and low-driving-Voltage thin-sheet X-cut LiNbO/sub 3/ Modulator with laminated low-dielectric-constant adhesive

We present a novel thin-sheet X-cut LiNbO/sub 3/ optical modulator structure which can be fabricated by precise polishing and lapping to obtain a thinner LiNbO/sub 3/ substrate for a lower driving voltage in addition to velocity matching and impedance matching. We demonstrated that the fabricated modulator had a driving voltage V/spl pi/ of 2 V and zero chirp for 40-Gb/s operation and had a high potential for suppressed dc drift, and long-term reliability.     

Versatile multiplier architectures in fields using the Montgomery multiplication algorithm

Many sequential multipliers for polynomial basis GF(2^k) fields have been proposed using the LSbit and MSbit multiplication algorithm. However, all those designs are defined over fixed size GF(2^k) fields and sometimes over fixed special form irreducible polynomials (AOL, trinomials, pentanomials). When such architectures are redesigned for arbitrary GF(2^k) fields and generic irreducible polynomials, therefore made versatile, they result in high space complexity (gate–latch number), low frequency (high critical path) and high latency designs. In this paper a Montgomery multiplication element (MME) architecture specially designed for arbitrary GF(2^k) fields defined over general irreducible polynomials, is proposed, based on an optimized version of the Montgomery multiplication (MM) algorithm for GF(2^k) fields. To evaluate the proposed MME and prove the efficiency of the MM algorithm in versatile designing, three distinct versatile Montgomery multiplier architectures are presented using this proposed MME. They achieve small gate–latch number and high clock frequency compared to other sequential versatile designs.     

Multimodal acting in mixed reality interactive storytelling

In this paper, an experimental mixed reality using a multimodal approach is introduced which lets users play characters in interactive narratives as though acting on a stage. Users interact with characters through speech, attitude, and gesture, enhancing their immersion in the virtual world. This system provides a small-scale but complete integration of multimodal communication in interactive storytelling. It uses a narrative's semantic context to focus multimodal input processing-that is, the system interprets users' acting (the multimodal input) in the mixed reality stage in terms of narrative functions representing users' contributions to the unfolding plot.     

A simple path-loss prediction model for HVAC systems

In this paper, we present a simple path-loss prediction model for link budget analysis in indoor wireless local area networks that use heating, ventilation, and air conditioning (HVAC) cylindrical ducts in the 2.4-2.5-GHz industrial, scientific, and medical band. The model we propose predicts the average power loss between a transmitter-receiver pair in an HVAC duct network. This prediction model greatly simplifies the link budget analysis for a complex duct network, making it a convenient and simple tool for system design. The accuracy of our prediction model is verified by an extensive set of experimental measurements.