The combined effect of melt stirring and ultrasonic agitation on the degassing efficiency of AlSi9Cu3 alloy

The combined effect of high intensity ultrasound and melt stirring on the degassing of AlSi₉Cu₃ using simultaneously the novel MMM (Multi-frequency Multimode Modulated) ultrasonic technology to promote cavitation, and low frequency mechanical vibration to induce melt stirring, was studied. On a first stage single low frequency mechanical vibration experiments were carried out in water in order to visualize and characterize its individual effect on the liquid dynamics. On a second stage ultrasonic vibration combined with different mechanical vibration frequencies, melt temperatures and processing times were tested in liquid AlSi₉Cu₃ alloy and their influence on the degassing efficiency was evaluated and compared with the results of the single MMM ultrasonic degassing technique. Fixed ultrasonic parameters (frequency and electric power) were used, according to the best results obtained in former experimental works developed by the authors. For the experimental conditions used in this research, it was found that melt stirring significantly improves degassing efficiency, and such improvement depends on the metal temperature and the mechanical vibration frequency. The experimental results suggest that combining melt agitation and ultrasonic vibration it is possible to achieve almost the aluminum alloy theoretical density without increasing the processing time.     

Special Issue of Bianisotropics 2000: Guest Editorial

An introduction to this special issue devoted to Bianisotropics 2000 – 8th International Conference on Electromagnetics of Complex Media, is provided.     

Least Squares Boundary Residual Method for the Analysis of Step Discontinuities in Open Chiral Waveguides

We analyse the reflection, transmission and radiation characteristics of a step discontinuity in a grounded chiral slab and we show that the step radiation can be enhanced due to the effect of the chirality. The analysis is performed using a mode matching technique. The fields are expressed in terms of the discrete modes and the continuous spectrum using two subsets of hybrid radiation modes: incident transverse electric (ITE) and incident transverse magnetic (ITM) modes. The scattering matrix of the step is determined by minimizing the boundary residual error in the sense of the least squares. The influence of chirality on the characterization of the step is demonstrated and we show that control of the radiation pattern is achieved, including angle and width of the radiation beam.     

Low seroprevalence of Toxoplasma gondii in feral pigs from a remote island lacking cats

Serum samples from 1,264 feral pigs from Ossabaw Island, Georgia were initially screened for antibodies to Toxoplasma gondii by the modified agglutination test (MAT) using whole-formalinized tachyzoites and mercaptoethanol. Seropositive samples were also tested by the Sabin-Feldman dye test, the latex agglutination test (LAT), and the indirect hemagglutination test (IHAT). Ossabaw Island is a remote, barrier island located southeast of Savannah, Georgia. Antibodies to T. gondii were found in 11 (0.9%) of 1,264 pigs. The antibody titers were 1:20 (1 pig), 1:80 (2 pigs), 1:160 (2 pigs), 1:320 (4 pigs), and 1:640 (2 pigs) by the MAT, and 1:8 (2 pigs), 1:16 (3 pigs), 1:32 (1 pig), 1:64 (2 pigs), 1:128 (1 pig), and > or = 1:256 (2 pigs) by the Sabin-Feldman dye test. By the LAT, 5 pigs had a titer of > or = 1:64 and by the IHAT all 11 pigs had a titer of < 1:64. Antibodies (MAT titer, > or = 1:25) were found in 31 (18.2%) of 170 feral pigs from mainland Georgia. This seroprevalence on the mainland was significantly higher (P < 0.0001) as compared on Ossabaw Island. The markedly low prevalence of T. gondii on Ossabaw Island was attributed to the virtual absence of cats on the Island; only 1 domestic cat was known to be present.     

Analysis of Brazilian SHP policy and its regulation scenario

This article presents the main regulatory changes that occurred in the Brazilian power sector in 2009, along with the impacts these changes caused on the market, especially related to small hydropower (<30 MW). This study addresses regulatory issues based on inventory studies and records of basic projects, changes related to the compensation of the assured energy of SHPs in the Brazilian energy reallocation market, the socio-economic impact resulting from the construction of SHPs, SHPs in alternative resource auctions and finally the general outlook for the growth scenario for SHPs in Brazil according to the ten-year plan (2010–2019). The overall conclusions of this investigation were that the 2008/2009 biennium was a period of great changes in the regulation of small hydropower plants in Brazil, and the SHP market has shown maturity. Additionally, despite SHP being a type of technology that is completely dominated by domestic industry, in recent years, they have experienced policy disincentives caused by changes to rules that inhibit their growth.     

Rheological and viscoelastic properties of colloidal solutions based on gelatins and chitosan as affected by pH

The objective of this study was to evaluate the influence of pH on rheological and viscoelastic properties of solutions based on blends of type A (GeA) or type B (GeB) gelatin and chitosan (CH). Solutions of GeA, GeB, CH, GeA:CH, and GeB:CH were prepared in several pH (3.5–6.0) and analyzed for determination of zeta-potential. Rheological analyses (stationary and dynamic essays) were carried out with blends allowing to study the effect of pH on shear stress, apparent viscosity, loss (G”) and storage (G’) moduli, and angle phase (Tanδ). Zeta potential of all biopolymers decreased linearly as a function of pH. CH presented higher values, and GeB, the lowest one, being the only having negative values at pH > 5. Overall, the pH influenced the rheological and viscoelastic properties of the colloidal solutions: shear stress and apparent viscosity increased as a function of pH. Other assays were carried out at 3% and 5% strain, for GeA:CH and GeB:CH, respectively. In the sol domain, G’ and G” (1 Hz) increased linearly for GeA:CH. But for GeB:CH, they increased in two linear different regions: one function between pH 3.5 and 5.0 and another one between 5.0 and 6.0, being a more important effect was visible in this last domain probably due to the negative net charge of gelatin, above it pI. An effect in two domains was also visible for Tanδ, explained in the same manner as previously. The GeB:CH blends behaved like diluted solutions, and transition temperatures increased as a function of pH.     

Nanocomposite powders of hydroxyapatite-graphene oxide for biological applications

The repair of bone fractures is a clinical challenge for patients with impaired healing, such as osteoporosis. Currently, different strategies have been developed to design new biomaterials, enhancing their interactions with biological systems and conducting the cellular behavior in the desired direction to help fracture healing. In the present work, hydroxyapatite-graphene oxide (HA-GO) nanocomposites were produced and the morphological and physicochemical influences of the addition of 0.5 wt%, 1.0 wt% and 1.5 wt% of GO to HA were observed. FEG-SEM and TEM analyses of HA-GO nanocomposites showed HA nanoparticles adhered to the surface of the GO sheets, suggesting an effective method to form nanostructured graphene-based biomaterials. As confirmation, physicochemical analyses by Raman, FTIR and TGA demonstrated a strong affinity between HA and GO, according to the increase of concentration from 0.5 wt% to 1.5 wt% GO in the HA-GO nanocomposites. Also, in order to evaluate the HA-GO nanocomposites behavior under biological microenvironment, in vitro bioactivity and indirect cytotoxicity tests were performed. FEG-SEM analyses confirmed the positive results for the bioactivity properties of HA-GO nanocomposite and indirect cytotoxicity demonstrated that even with a decrease in the hDPSCs viability and proliferation, when increasing to 1.5 wt% of GO concentration, high level of cell viability was exhibited by HA-GO nanocomposites. These biological results suggested the 0.5 wt% HA-GO nanocomposite as a potential bioactive bone graft and a promising biomaterial for bone tissue regeneration, when compared to the pure HA.     

Effect of light,food additives and heat on the stability of sorghum 3-deoxyanthocyanins in model beverages

This work aimed to evaluate the stability of sorghum 3-deoxyanthocyanins (DXA) in model beverages (pH 3.5) elaborated with crude sorghum phenolic extract, containing ascorbic acid and sulphite, under fluorescent light exposure and subjected to heat treatment. There was no significant difference in the DXA degradation during storage under light exposure (24.16%) and absence of light (20.72%). DXA degradation did not differ in the presence of ascorbic acid during storage under light exposure (23.99–25.38%) and absence of light (19.87–21.74%). The addition of sulphite caused an initial bleaching reaction, but as a reversible reaction, the anthocyanin content was higher on the last day of storage compared to the first day. There were no significant differences in total anthocyanin content of all treatments subjected to the heat treatment (80 °C for 5 and 25 min). Thus, crude DXA are very stable under light, additives and heat, and may be useful as natural food colourants.