Distributed power generation versus grid extension: an assessment of solar photovoltaics for rural electrification in Northern Ghana

The competitiveness of distributed solar photovoltaic (PV) power generation for rural electrification in northern Ghana is assessed and compared with the conventional option of extending the national grid and increasing the capacity for centralised power generation. A model is constructed to calculate the life‐cycle cost (LCC) of the two options and to test the sensitivity of different parameters. All calculations are based on information from the GEF/UNDP pilot region in the East Mamprusi District. In addition to the economic aspect, issues of quality and environmental effects are discussed. The LCC of distributed PV is lower than that of a grid extension for an electricity demand corresponding to solar home systems of 140 W_p or smaller. Thus, distributed PV is cost competitive for purposes of lighting, entertainment, information and basic public facilities, such as schools and hospitals. The LCC for the option of grid extension with central power generation is dominated by the cost of low‐voltage micro‐grids within the communities. Important factors are the density of households and the penetration (fraction of households electrified), as they affect the line length per connected household. The relatively low cost of regional medium‐voltage grids makes the geographical location of each community less important than expected. Battery replacement every fifth year makes up the major part of the LCC of solar home systems and is also responsible for the large energy input in the production of the systems. This could limit both future cost reductions of distributed PV and its potential to mitigate greenhouse gas emissions. Copyright © 2002 John Wiley & Sons, Ltd.     

Electron tunneling between two-dimensional electronic systems in a heterostructure with a single doped barrier

Electron tunneling in a heterostructure with a single doped barrier was investigated. Analysis of the experimental data showed that all features in the tunneling conductance are due to electron tunneling between two-dimensional electron sheets which appear on different sides of the barrier as a result of ionization of impurities in the barrier. Electron transport between the two-dimensional electron sheets and three-dimensional contact regions does not introduce significant distortions in the measured tunneling characteristics. In such structures there is no current flow along the two-dimensional electron gas; such a current ordinarily makes it difficult to investigate tunneling between two-dimensional electronic systems in magnetic fields. Fiz. Tekh. Poluprovodn. 32, 602–606 (May 1998)     

A MOMENT MATCHING APPROACH FOR MODELLING ATM CELL ARRIVAL PROCESSES

This paper presents a moment matching approach for constructing an equivalent model of an ATM cell arrival process based on inter-cell arrival time measurement. As compared to a renowned parameter-matching technique proposed by Heffes and Lucatoni, the advantage of this approach is that the matching parameters are more easily obtained in real traffic situation. This approach has been tested on an MMBP^[Poisson] process, and results show that only the first four moments are required to capture the key characteristics in this process.     

Ammoxidation of toluene over Y-Ba-Cu-Co-O perovskites

Ammoxidation of toluene over the perovskites YBa₂Cu₃O_6.1, YBa₂Cu₂CoO_6.7 and YBaCuCoO_4.9 was investigated at 400 °C. At low partial pressures of O₂ benzonitrile was selectively formed, while CO₂ was the main product at high pressures of O₂. Systematic differences in activity were observed for the three phases and are related to the crystal contents of Cu and Co. At low O₂ pressures, Cu-sites are active for nitrile formation, while Co-sites give CO₂. At high O₂ pressures, the activity for CO₂ of Cu-sites increases more than that of Co-sites due to filling of near-surface oxygen vacancies.     

A 640 by 480 Pixels Readout Circuit for IR Imaging

A readout circuit for a 640 × 480 pixels FPA (focal plane array) has been successfully designed, fabricated and tested. The circuit solution is based on a per pixel source-follower direct injection (SFDI) pre-amplifier. Signal multiplexing is performed in both X and Y direction. The pixel size is 25 m × 25m. The chip is optimized for a QWIP (quantum well infrared photodetector) operating at a temperature of 70 K. The circuit has been realized in a standard 0.8 m CMOS process.     

Phase-based multidimensional volume registration

We present a method for accurate image registration and motion compensation in multidimensional signals, such as two-dimensional (2-D) X-ray images and three-dimensional (3-D) computed tomography/magnetic resonance imaging volumes. The method is based on phase from quadrature filters, which makes it robust to noise and temporal intensity variations. The method is equally applicable to signals of two, three or higher number of dimensions. We use parametric models, e.g., affine models, finite elements or local affine models with global regularization. Experimental results show high accuracy for 2-D and 3-D motion compensation.     

On Surface Losses in Direct Metal Laser Sintering Printed Millimeter and Submillimeter Waveguides

Different lengths of WR3 (220–330 GHz) and WR10 (75–110 GHz) waveguides are fabricated through direct metal laser sintering (DMLS). The losses in these waveguides are measured and modelled using the Huray surface roughness model. The losses in WR3 are around 0.3 dB/mm and in WR10 0.05 dB/mm. The Huray equation model is accounting relatively good for the attenuation in the WR10 waveguide but deviates more in the WR3 waveguide. The model is compared to finite element simulations of the losses assuming an approximate surface structure similar to the resulting one from the DMLS process.     

Reverberation Chamber技术应用于手机OTA量测

一般混响室多用于EMC测试中,文章针对手机的OTA全辐射功率与全性灵敏度在混响室中测试方法提出说明,并针对小型的多输入多输出天线于多重路径环境测试测试方式说明。     

Extracting electrical material parameters of electrically large dielectric objects from reverberation chamber measurements of absorption cross section

Reverberation chambers can be used to measure the absorption cross section of a dielectric object. The absorption cross section of a dielectric object depends on its size, shape, and electrical material parameters. By comparing with a theoretical model of the absorption cross section, material parameters can be extracted from measurements. A model based on a plane wave approach of incident fields is used here, valid for electrically large material samples in an isotropic environment such as that in a reverberation chamber. Which material parameter can be extracted depends on the properties of the material sample. The presented method combines the accuracy of cavity methods with the flexibility of being able to measure samples of arbitrary size and shape. Because both the reverberation chamber and the material sample are electrically large, the method is particularly useful at millimeter-wave frequencies.