Bench-scale bubbling fluidized bed systems around the world - Bed agglomeration and collapse: A comprehensive review

Thermochemical conversion by gasification process is one of the most relevant technologies for energy recovery from solid fuel, with an energy conversion efficiency better than other alternatives like combustion and pyrolysis. Nevertheless, the most common technology used in the last decades for thermochemical conversion of solid fuel through gasification process, such as coal, agriculture residues or biomass residues are the fluidized bed or bubbling fluidized bed system. For these gasification technologies, an inert bed material is fed into reactor to improve the homogenization of the particles mixture and increase the heat transfer between solid fuel particles and the bed material. The fluidized bed reactors usually operate at isothermal bed temperatures in the range of 700–1000 °C, providing a suitable contact between solid and gas phases. In this way, chemical reactions with high conversion yield, as well as an intense circulation and mixing of the solid particles are encouraged. Moreover, a high gasification temperature favours carbon conversion efficiency, increasing the syngas production and energy performance of the gasifier. However, the risk of eutectic mixtures formation and its subsequent melting process are increased, and hence the probability of bed agglomeration and the system collapse could be increased, mainly when alkali and alkaline earth metals-rich biomasses are considered. Generally, bed agglomeration occurs when biomass-derived ash reacts with bed material, and the lower melting temperature of ash components promotes the formation of highly viscous layers, which encourages the progressive agglomerates creation, and consequently, the bed collapse and system de-fluidization. Taking into account the relevance of this topic to ensure the normal gasification process operating, this paper provides several aspects about bed agglomeration, mostly for biomass gasification systems. In this way, chemistry and mechanism of bed agglomeration, as well as, some methods for in-situ detection and prediction of the bed agglomeration phenomenon are reviewed and discussed.     

Initial Postbuckling of Elastic Rods Subjected to Thermal Loads and Resting on an Elastic Foundation

In practical applications encountered in some mechanical systems initially straight slender elements laterally supported by elastic foundations may be prevented from thermal expansion. In such conditions a compressive force is created and a serious equilibrium instability phenomenon may take place when a critical temperature gradient is imparted to the structure. If the temperature is further increased the rod may experience relatively large deflections, and a geometrically non-linear two-point boundary value problem describes this behaviour. However, if finite but moderate deflections are admitted, an approximate solution may be obtained if a classical perturbation expansion method is applied to the non-linear ordinary differential governing equations. This approach renders a set of linear equations which can be sequentially solved. This work proposes an analytical solution for the assessment of the initial post-buckling configuration of slender elastic rods supported on linear elastic foundations and subjected to a uniform temperature gradient. The rod ends are assumed hinged and immovable and the thermal strain-temperature relationship is linear. The governing equations are derived and made non-dimensional so it is seen that two parameters rule the problem: the foundation stiffness modulus and the rod slenderness ratio. Results are presented and discussed for one slenderness ratio and a range of foundation stiffness that corresponds to the fourth buckling mode. Generally an increase in the applied temperature is associated with a decrease in the compressive force, but it is shown particular conditions where an opposite behavior is observed. The initial post-buckling results for unsupported rods are compared with existing full post-buckling solution and show excellent agreement, given that in practical situations the deflections are moderate.     

Performance Assessment of Hydraulic Efficiency Indexes

The analysis of residence time distribution functions originating from tracer studies is one of the main tools for the assessment of hydraulic performance in water and wastewater treatment units. In order to simplify the analysis, hydraulic indexes extracted from these functions are normally used. In general, these indexes are divided into two categories: short circuit and mixing indicators. However, some indexes may be related to more than one physical phenomenon (i.e., short circuit, mixing, recirculation, dead zones), leading to erroneous interpretation. In this work their capability to evaluate short-circuit and mixing levels in water and wastewater treatment units is assessed. Among the indexes analyzed, t10, which is the time necessary for 10% of the tracer to leave the unit, is recommended as a short-circuit indicator and the dispersion index (σ2) and the Morril index as mixing indicators, depending on the mixing level.     

Dilatometric behavior and microstructure of sintered Fe–NbC and Fe–TaC composites

Fe-reinforced composites were manufactured by the addition of 10–20 wt.% NbC or TaC particles aiming at improved mechanical and wear behavior. Two varieties of Fe powders from Hoeganaes Corp. were used, Ancorsteel 1000B and 45P. Composites produced using the former variety included a small amount of Fe₃P to induce liquid-phase sintering whereas 45P powder was pre-alloyed with P by the manufacturer. The hardness of the matrix was adjusted adding carbon to the composite mixture. The powders were milled for different times and annealed prior to pressing. A dilatometric study was carried out under hydrogen to establish optimum sintering profiles. Relative densities up to 97% TD were achieved. Both microstructure and density of the sintered pellets were evaluated in order to establish correlations involving composition, processing parameters and microstructure of the composite.     

Essential Oils from Annonaceae Species from Brazil: A Systematic Review of Their Phytochemistry,and Biological Activities

The present work involves a systematic review of the chemical composition and biological effects of essential oils from the Annonaceae species collected in Brazil from 2011 to 2021. Annonaceae is one of the most important botanical families in Brazil, as some species have economic value in the market as local and international fruit. In addition, the species have useful applications in several areas—for instance, as raw materials for use in cosmetics and perfumery and as medicinal plants. In folk medicine, species such as Annona glabra L. and Xylopia sericea A. St.-Hil. are used to treat diseases such as rheumatism and malaria. The species of Annonaceae are an important source of essential oils and are rich in compounds belonging to the classes of mono and sesquiterpenes; of these compounds, α-pinene, β-pinene, limonene, (E)-caryophyllene, bicyclogermacrene, caryophyllene oxide, germacrene D, spathulenol, and β-elemene are the most abundant. The antimicrobial, anti-inflammatory, antileishmania, antioxidant, antiproliferative, cytotoxic, larvicidal, trypanocidal, and antimalarial activities of essential oils from the Annonaceae species in Brazil have been described in previous research, with the most studies on this topic being related to their antiproliferative or cytotoxic activities. In some studies, it was observed that the biological activity reported for these essential oils was superior to that of drugs available on the market, as is the case of the essential oil of the species Guatteria punctata (Aubl.) R. A. Howard., which showed a trypanocidal effect that was 34 times stronger than that of the reference drug benznidazol.     

Modeling of industrial nylon-6,6 polycondensation process in a twin-screw extruder reactor. I. phenomenological model and parameter adjusting

This article describes a mathematical model for the finishing stage of nylon-6,6 polycondensation in a twin-screw extruder reactor. In the model, the extruder is conceptually divided into two regions. The first one is the partially filled degassing zone, which is operated under low pressure and where the evaporation of water from the polymer takes place. The rate of evaporation is considered to depend on an overall mass transfer coefficient and is limited by the water–polymer physical equilibrium. In the second region, which is fully filled, the polymer flow is assumed to be plug-flow and, in this region, the reversible polycondensation reaction occurs, as well as degradation reactions. A comparison with experimental data obtained in an industrial plant shows fairly good agreement with model predictions after optimal fitting of the rate coefficients. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67:1573–1587, 1998     

Chain extension reaction in solid‐state polymerization of recycled PET: The influence of 2,2′‐bis‐2‐oxazoline and pyromellitic anhydride

Conventional and chain extended‐modified solid‐state polymerization (SSP) of postconsumer poly(ethylene terephthalate) (PET) from beverage bottles was investigated. SSP was carried out at several temperatures, reaction times, and 2,2′‐bis‐2‐oxazoline (OXZ) or pyromellitic anhydride (ANP) concentrations. The OXZ was added by impregnation with chloroform or acetone solution. Higher molecular weights were reached when the reaction was carried out with OXZ, resulting in bimodal distribution. The molecular weights of the flakes reacted at 230°C for 4 h were 85,000, 95,000, and 100,000 for samples impregnated with 0, 0.5, and 1.25 wt % OXZ solution, respectively. In the case of reactions with ANP, branched chains were obtained. The thermal and thermal‐mechanical‐dynamic properties of these high‐molecular‐weight recycled PET were determined. For OXZ‐reacted samples, the reduction of crystallinity was observed as the reaction time was increased, becoming evident the destruction of the crystalline phase. The chain extended samples did not show changes in thermal relaxations or thermal degradation behavior. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Water flux,DSC, and cytotoxicity characterization of membranes of cellulose acetate produced from sugar cane bagasse,using PEG 600

Summary In this article, cellulose acetate produced through the homogeneous acetylation of sugar cane bagasse cellulose was used to produce membranes, using poly(ethyleneglycol) 600 (PEG 600) as an admixture. The membranes were characterized using water flux measurements (Payne’s cup), differential scanning calorimetry (DSC) and neutral red uptake (cytotoxicity). The results showed that PEG 600 acts as a crystallinity inductor and/or pore former in the cellulose acetate matrix. The induction of crystallinity is important for this system since it had not been reported on the literature yet. The results also demonstrated that the studied membranes present a nontoxic behavior.     

Transrectal ultrasonography to assess local extent of prostatic cancer before radical prostatectomy

BACKGROUND: The safety and efficacy of operations for gastrointestinal diseases in very elderly patients has been a matter of debate in recent years. STUDY DESIGN: One hundred seventy-seven instances of carcinoma of the colon and rectum in patients more than 80 years of age who wee surgically treated between 1961 and 1987 were reviewed. They were compared with 623 similar instances in patients younger than 80 years of age who were treated during the same time period. RESULTS: Octogenarians and nonagenarians significantly more often displayed obstruction or perforation, elevated preoperative carcinoembryonic antigen, right-sided lesions, and solitary hepatic metastases, when present. Patients more than 80 years of age received adjuvant chemotherapy or radiotherapy less often. Carcinoma recurrence in very elderly patients implied a very poor prognosis, with only a 4 percent salvage rate. The actuarial five year survival rate was 32 percent for the older patients and 48 percent in the younger group (p < 0.05). There was no significant difference in operative mortality between the two groups. CONCLUSIONS: In general, age alone should not alter treatment strategy in patients with carcinoma of the colon and rectum.     

p53 expression in neurofibroma and malignant peripheral nerve sheath tumor. An immunohistochemical study of sporadic and NF1-associated tumors

OBJECTIVES--(1) to evaluate regional cerebral blood flow (rCBF) with single photon emission computed tomography and 99mTc-hexamethylpropyleneamine oxime in patients with the idiopathic adult hydrocephalus syndrome (IAHS); (2) to examine regional cerebral blood flow (rCBF), gait, and psychometric functions before and after CSF removal (CSF tap test); (3) to assess abnormalities in subcortical white matter by MRI. METHODS--Thirty one patients fulfilling the criteria for IAHS (according to history and clinical and neuroradiological examination) were studied. Quantified gait measurements, psychometric testing, and rCBF before and after removal of CSF were obtained. Pressure of CSF and CSF outflow conductance were investigated with a constant pressure infusion method. Brain MRI was used to quantify the severity of white matter lesions and periventricular hyperintensities. In IAHS a widespread rCBF hypoperfusion pattern was depicted, with a caudal frontal and temporal grey matter and subcortical white matter reduction of rCBF as the dominant feature. Removal of CSF was not accompanied by a concomitant increase in rCBF. Significant white matter lesions were detected only in a minority of patients by MRI. An altered CSF hydrodynamic state with a higher CSF pressure and lower conductance was confirmed. IAHS is characterised by an abnormal CSF hydrodynamic state, associated with a widespread rCBF reduction with preference for subcortical white matter and frontal-temporal cortical regions. Furthermore in most patients MRI did not show white matter changes suggestive of a coexistent subcortical arteriosclerotic encephalopathy. At least in the idiopathic group of patients with AHS, measurements of rCBF before and after temporary relief of the CSF hydrodynamic disturbance will not provide additional information that would be helpful in the preoperative evaluation but is suggestive of a preserved autoregulation of rCBF.