Effect of an ultraviolet/ozone treatment on the surface texture and functional groups on polyacrylonitrile carbon fibres

The effect of an ultraviolet generated ozone treatment (UV/O₃), on the surface and near surface functionality and structure of polyacrylonitrile based carbon fibres has been studied using X-ray photoelectron spectroscopy (XPS), scanning electron microscopy, and Raman spectroscopy. Results were compared to electrochemically treated fibres. The UV/O₃ treated fibres showed increased levels of oxygen functionalities. Levels of oxygen comparable to a high level electrochemical shear treatment were achieved within 5 min of treatment (O/C 0.11 ± 0.03 for both treatments). XPS O1s/C1s ratios as high as 0.3 were produced, with saturation occurring at approximately 40 min exposure. The main functional groups introduced were, in addition to hydroxyl species, alkoxides (ca. 286.5 eV), carbonyl (288.0 eV), and carboxyl (289.5 eV). Examination of the full width half maximum of the graphite peak from XPS C1s showed some disorder was introduced to the first few layers of the fibre with treatment but the effect was not evident in the Raman, i.e. in the bulk of the fibre.     

Preferential interactions of fluorescent probe Prodan with cholesterol

The fluorescent probe Prodan has been widely used as a probe of model and biological membranes. Its fluorescent maxima in phospholipid bilayers vary as a function of phase state, with maxima at 485 for the liquid crystal Lalpha, 435 nm for the gel L'beta, and 507 nm for the interdigitated gel LbetaI phase, with excitation at 359 nm. These spectral changes have been used for the detection of phase changes among these phases. In the present study, the fluorescent properties and partition coefficients of Prodan in model membranes of phosphatidylcholines and phosphatidylethanols have been studied as a function of lipid phase state and cholesterol content. It is shown that the Prodan spectrum in the presence of cholesterol no longer reflects the known phase state of the lipid; in each phase state, the presence of cholesterol leads to a spectrum with the maximum at 435 nm, characteristic of the noninterdigitated gel phase. The partition coefficient of Prodan into these lipids also varies with the phase state, giving values of 0.35 x 10(4) in the interdigitated gel, 1.8 x 10(4) in the noninterdigitated gel, and 7. 6 x 10(4) in the liquid crystal phase. In the presence of cholesterol these partition coefficients are increased to 13 x 10(4) for the liquid crystal and the gel phase, and 5.1 x 10(4) in the presence of 100 mg/ml ethanol. These results suggest that Prodan has preferential interactions with cholesterol, and is thus not a randomly distributed fluorescent reporter probe in membranes containing cholesterol. These results suggest that Prodan should be used only with great caution in complex lipid mixtures, particularly biological membranes.     

A Three-Step Approach to Microcomputer Security Controls

Despite their many benefits, microcomputers can dramatically increase the vulnerability of an organization's information system. As these devices are integrated in an organization, computer hardware, software, and data become widely dispersed, enabling more individuals to access information. Widespread use of microcomputers, especially when coupled with their ability to communicate with larger systems, requires early formulation and implementation of security and control procedures that differ substantially from those established in mainframe environments.     

Biomedical applications of thermally activated shape memory polymers

Shape memory polymers (SMPs) are smart materials that can remember a primary shape and can return to this primary shape from a deformed secondary shape when given an appropriate stimulus. This property allows them to be delivered in a compact form via minimally invasive surgeries in humans, and deployed to achieve complex final shapes. Here we review the various biomedical applications of SMPs and the challenges they face with respect to actuation and biocompatibility. While shape memory behavior has been demonstrated with heat, light and chemical environment, here we focus our discussion on thermally stimulated SMPs.     

Genetic scheduling for parallel processor systems: comparativestudies and performance issues

Task scheduling is essential for the proper functioning of parallel processor systems. Scheduling of tasks onto networks of parallel processors is an interesting problem that is well-defined and documented in the literature. However, most of the available techniques are based on heuristics that solve certain instances of the scheduling problem very efficiently and in reasonable amounts of time. This paper investigates an alternative paradigm, based on genetic algorithms, to efficiently solve the scheduling problem without the need to apply any restricted assumptions that are problem-specific, such is the case when using heuristics. Genetic algorithms are powerful search techniques based on the principles of evolution and natural selection. The performance of the genetic approach will be compared to the well-known list scheduling heuristics. The conditions under which a genetic algorithm performs best will also be highlighted. This will be accompanied by a number of examples and case studies     

South Turkwel: a new pliocene hominid site in Kenya

New fossils discovered south of the Turkwel River in northern Kenya include an associated metacarpal, capitate, hamate, lunate, pedal phalanx, mandibular fragment, and teeth. These fossils probably date to around 3.5 m.y.a. Faunal information suggests that the environment at South Turkwel was predominantly bushland. The mandibular and dental remains are fragmentary, but the postcranial fossils are informative. Comparisons with Australopithecus, modern human, chimpanzee and gorilla hand bones suggest that the Turkwel hominid was most like Australopithecus afarensis and A. africanus. Carpometacarpal articulations are intermediate between those of modern humans and African apes, suggesting enhanced gripping capabilities compared with extant apes. The hamulus was strikingly large, similar in proportion only to Neandertals and some gorillas, suggesting the presence of powerful forearms and hands. There are no indicators of adaptations to knuckle-walking or suspensory locomotion in the hand, and the pedal phalanx suggests that this hominid was habitually bipedal.     

Multiple measures of hand-use lateralization in the ring-tailed lemur (Lemur catta).

Evaluated a free-ranging matriline of 13 ring-tailed lemurs (Lemur catta) from videotaped records for lateralized hand use with 2 tasks and 4 measures: food reaching, feeding posture, duration of food holding, and manipulation of food between mouth and hand while eating. Binomial z scores determined 7 lemurs to be left preferent in reaching, 3 right, and 3 ambipreferent. Ideographic analyses suggested possible sex-linked and early experience twin effects. When compared to right and ambipreferent lemurs, left reach preferent lemurs used the left hand more but bimanuals grasped less in food holding and also engaged in less hand-mouth food manipulation. The tendency to manipulate food was not correlated with bimanual holding but was inversely related to left hand holding and directly related to right hand holding. These patterns are discussed as possible precursors of human bimanual manipulation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A comparison of tensile,compressive and torsional creep in isotropic and oriented polyethylene

An account is given of the creep behaviour, under tensile, compressive and torsional loading conditions, of oriented samples of a linear polyethylene (LPE) which have been produced by the process of hydrostatic extrusion. A comparison is made between the behaviour of oriented and isotropic LPE material and, with biomedical applications in mind, between the performance of the linear LPE polyethylene and the ultra-high molecular weight polyethylene grade commonly used in prostheses.     

An extended soluble gas exchange model for estimating pulmonaryperfusion. I. Derivation and implementation

A dynamic model for respiratory exchange of blood soluble gas is described. This model includes a general treatment of tidal breathing, an inhomogeneous lung comprising multiple distensible compartments, and nonlinearities due to multiple-gas effects. The motivation for this new model is the continuing interest in estimating pulmonary perfusion from measurements of respiratory soluble gas exchange. Numerical simulation can be employed to investigate the errors that result from simplifications made in the derivations of simpler models used for this purpose. Examples of such simplifications are the assumptions that ventilation is constant and unidirectional, and that multiple soluble gases can be independently modeled. These results can delimit the boundaries within which perfusion estimates can be considered reliable. An example demonstrating the model and its numerical solution is presented.