Delamination vs matrix cracking in layered composites subjected to transverse loading

An algorithm is presented to compute the distribution of the strain energy release rate along the crack front of a penny-shaped delamination in a layered orthotropic body. The method applies a finite element recently proposed for three-dimensional analysis of layered orthotropic circular plates. The algorithm is economical even though it treats a full three-dimensional state of stress. The method requires only a single virtual crack extension to accurately compute the strain energy release rate at a point along the crack front. The method is applied to the study of delamination crack growth in a nine layer cross-ply laminate. The variation of strain energy release rate, G, along the crack front, is determined. The significance of the plate aspect ratio, as well as length scale, on the fracture process is studied. The establishment of a loading case where a distributed transverse compressive loading causes delamination growth is given.     

Participatory ergonomics in design processes: the role of boundary objects

The aim of this paper is to introduce the concept of boundary objects in order to better understand the role of objects in participatory ergonomics (PE) design processes. The research question is: What characterizes boundary objects in PE processes? Based on two case studies, we identify eight characteristics of boundary objects and their use, which make them particularly useful in PE design processes. These characteristics go beyond the object itself and extend into the context of their use. We argue that the selection of boundary objects in PE processes is of great importance, since different objects enable workers’ participation and collaborative design in different ways. The framework developed may serve to provide criteria to guide practitioners and intervention researchers in the selection of objects to facilitate a PE process. The paper concludes with a list of recommendations for ergonomic practitioners that are based on the framework.     

Perceived Air Quality,Sick Building Syndrome (SBS) Symptoms and Productivity in an Office with Two Different Pollution Loads

Abstract Perceived air quality, Sick Building Syndrome (SBS) symptoms and productivity were studied in an existing office in which the air pollution level could be modified by introducing or removing a pollution source. This reversible intervention allowed the space to be classified as either non-low-polluting or low-polluting, as specified in the new European design criteria for the indoor environment CEN CR 1752 (1998). The pollution source was a 20-year-old used carpet which was introduced on a rack behind a screen so that it was invisible to the occupants. Five groups of six female subjects each were exposed to the conditions in the office twice, once with the pollution source present and once with the pollution source absent, each exposure being 265 min in the afternoon, one group at a time. They assessed the perceived air quality and SBS symptoms while performing simulated office work. The subject-rated acceptability of the perceived air quality in the office corresponded to 22% dissatisfied when the pollution source was present, and to 15% dissatisfied when the pollution source was absent. In the former condition there was a significantly increased prevalence of headaches (P= 0.04) and significantly lower levels of reported effort (P=0.02) during the text typing and calculation tasks, both of which required a sustained level of concentration. In the text typing task, subjects worked significantly more slowly when the pollution source was present in the office (P=0.003), typing 6.5% less text than when the pollution source was absent from the office. Reducing the pollution load on indoor air proved to be an effective means of improving the comfort, health and productivity of building occupants.     

Evaluation of non-linear strain paths using Generalized Forming Limit Concept and a modification of the Time Dependent Evaluation Method

The prediction of formability is one of the most important tasks in sheet metal forming process simulation. The common criterion for ductile fracture in industrial applications is the Forming Limit Diagram (FLD). This is only applicable for linear strain paths. However, in most industrial simulation cases non-linear strain paths occur. To resolve this problem, a phenomenological approach is introduced, the so-called Generalized Forming Limit Concept (GFLC). The GFLC enables prediction of localized necking on arbitrary non-linear strain paths. Another possibility is the use of the Time Dependent Evaluation Method (TDEM) within the simulation as a failure criteria. During the Numisheet Benchmark 1 (2014) a two-stage forming process was performed with three typical sheet materials (AA5182, DP600 and TRIP 780) and three different blank shapes. The task was to determinate the point in time and space of local instability. Therefore the strain path for the point of maximum local thinning is evaluated. To predict the start of local necking the Generalized Forming Limit Concept (GFLC), the Time Dependent Evaluation Method (TDEM) and the modified TDEM were applied. The results of the simulation are compared with the results of the Benchmark experiment.     

Consequences of Orbital Degeneracy in Insulating and Doped Manganites

We derive a spin-orbital model for manganites which includes the complete e _g and t _2g superexchange of S=2 spins at Mn³⁺ ions and predicts that the same type of antiferromagnetic and orbital ordering is stabilized in insulating La₃Mn₂O₇ as in LaMnO₃ by a purely electronic mechanism dominated by the e _g-superexchange. At finite doping we consider a model of t–J variety which describes a metal–insulator transition due to a competition between lattice polarons and kinetic energy in the metallic ferromagnetic ground state.     

An optimisation strategy in a digital environment applied to neonatal chest imaging

The aim of this study was to find the optimum tube voltage for neonatal chest imaging in computed radiography. The study was designed to take full advantage of the benefits of digital imaging, for example, by comparing the tube voltages at constant effective dose. A phantom study using a living rabbit was first conducted. Images were collected at tube voltages ranging from 40 to 90 kV(p). The reproduction of four structures (central vessels, peripheral vessels, carina and thoracic vertebrae) was rated by 10 radiologists. The reproduction of both central and peripheral vessels was relatively independent of tube voltage. The carina was better reproduced at higher tube voltages whereas the opposite was true for the thoracic vertebrae. Based on the higher importance of the reproduction of the carina it was decided that 90 kV(p) was the optimal tube voltage. To validate the result from the phantom study, a follow-up study was conducted in which images of neonates collected at the tube voltage regularly used at Sahlgrenska University Hospital (70 kV(p)) were compared with images collected at the tube voltage proposed by the phantom study. The follow-up study confirmed the results from the phantom study that the reproduction of the carina was better at 90 than at 70 kV(p). In conclusion, for neonatal chest imaging-given the same effective dose-90 kVp gives better reproduction of important structures than the regularly used 70 kV(p).     

Investigating the effects of reduced size on the properties of ferroelectrics

A series of experiments has been undertaken to understand more about the fundamental origin of the thickness-induced permittivity collapse often observed in conventional thin film ferroelectric heterostructures. The various experiments are discussed, highlighting the eventual need to examine permittivity collapse in thin film single crystal material. It has been seen that dielectric collapse is not a direct consequence of reduced size, and neither is it a consequence of unavoidable physics associated with the ferroelectric-electrode boundary. Research on three-dimensional shape-constrained ferroelectrics, emphasizing self-assembled structures based on nanoporous alumina templates and on FIB-milled single crystals, is also presented, and appears to represent an exciting area for ongoing research.     

A critical approach to viscosity index

The viscosity index (VI) is a useful tool for lubricant users and refiners, since it is a measure of the effect of temperature changes on the viscosity of the oil. However, it was found that the viscosity index does not correlate with the flow activation energy E_a, which is the theoretically defined dependence of the viscosity on temperature. In this way, two oils may have the same flow activation energy but a viscosity index varying by up to 120. We therefore believe that the VI does not always give a proper representation of the effect of temperature on the kinematic viscosity.¹³C NMR spectroscopy was used to identify the molecules with a high VI. Twenty different oil samples produced from eight different vacuum gas oils with viscosity indices ranging from −104 to 146 were analyzed and key parameters identified for high VI molecules: long alkyl chains, methyl branching in the centre of the molecule, low content of aromatic compounds, no ethyl branching and no tertiary carbons.A correlation based on four selected peaks was developed, giving a very good prediction of the viscosity index.     

Topology optimization of periodic microstructures with a penalization of highly localized buckling modes

The problem of determining highly localized buckling modes in perfectly periodic cellular microstructures of infinite extent is addressed. A double scale asymptotic technique is applied to the linearized stability problem for a periodic structure built from linearly elastic microstructures. The obtained stability condition for the microscale level is then used to establish a comparative analysis between different material distributions in the base cell subjected to the same strain field at the macroscale level. The idea is illustrated by some two‐dimensional finite element examples and used to design materials with optimal elastic properties that are less prone to localized instability in the form of local buckling modes at the scale of the microstructure. Copyright © 2002 John Wiley & Sons, Ltd.     

Observations on the electrical resistivity of steel fibre reinforced concrete

Steel fibre reinforced concrete (SFRC) is in many ways a well-known construction material, and its use has gradually increased over the last decades. The mechanical properties of SFRC are well described based on the theories of fracture mechanics. However, knowledge on other material properties, including the electrical resistivity, is sparse. Among others, the electrical resistivity of concrete has an effect on the corrosion process of possible embedded bar reinforcement and transfer of stray current. The present paper provides experimental results concerning the influence of the fibre volume fraction and the moisture content of the SFRC on its electrical resistivity. The electrical resistivity was measured by alternating current (AC) at 126 Hz. Moreover, an analytical model for the prediction of the electrical resistivity of SFRC is presented. The analytical model is capable of predicting the observed correlation between the fibre volume fraction and the electrical resistivity of the composite (the SFRC) for conductive fibres and moisture saturated concrete. This indicates that the steel fibres were conducting when measuring the electrical resistivity by AC at 126 Hz. For partly saturated concrete the model underestimated the influence of the addition of fibres. The results indicate that the addition of steel fibres reduce the electrical resistivity of concrete if the fibres are conductive. This represents a hypothetical case where all fibres are depassivated (corroding) which was created to obtain a conservative estimate on the influence of fibres on the electrical resistivity of concrete. It was observed that within typical ranges of variation the influence of the moisture content on the electrical resistivity was larger than the effect of addition of conductive steel fibres, but also that the relative impact on the electrical resistivity due to conductive steel fibres increased when the moisture content of the concrete was reduced.