Arduino-based slider setup for gas–liquid mass transfer investigations: Experiments and CFD simulations

The implementation of traditional sensors is a drawback when investigating mass transfer phenomena within microstructured devices, since they disturb the flow and reactor characteristics. An Arduino based slider setup is developed, which is equipped with a computer-vision system to track gas–liquid slug flow. This setup is combined with an optical analytical method allowing to compare experimental results against CFD simulations and investigate the entire lifetime of a single liquid slug with high spatial and temporal resolution. Volumetric mass transfer coefficients are measured and compared with data from literature and the mass transfer contribution of the liquid film is discussed.     

The molecular structure of asphaltene: an unfolding story

From detailed chemical and thermal degradation studies, a host of structural units have been identified in Alberta asphaltenes. It has been shown that the extent of aromatic condensation is low and that highly condensed pericyclic aromatic structures are present in very low concentrations. From the available data reported to date, it is concluded that petroleum asphaltenes were mainly derived through the catalytic cyclization, aromatization and condensation of n-alkanoic, probably fatty acids, precursors.     

Prodynorphin and Proenkephalin in Cerebrospinal Fluid of Sporadic Creutzfeldt–Jakob Disease

Proenkephalin (PENK) and prodynorphin (PDYN) are endogenous opioid peptides mainly produced in the striatum and, to a lesser extent, in the cerebral cortex. Dysregulated metabolism and altered cerebrospinal fluid (CSF) levels of PENK and PDYN have been described in several neurodegenerative diseases. However, no study to date investigated these peptides in the CSF of sporadic Creutzfeldt–Jakob disease (sCJD). Using liquid chromatography-multiple reaction monitoring mass spectrometry, we evaluated the CSF PDYN- and PENK-derived peptide levels in 25 controls and 63 patients with sCJD belonging to the most prevalent molecular subtypes (MM(V)1, VV2 and MV2K). One of the PENK-derived peptides was significantly decreased in each sCJD subtype compared to the controls without a difference among subtypes. Conversely, PDYN-derived peptides were selectively decreased in the CSF of sCJD MV2K, a subtype with a more widespread overall pathology compared to the sCJD MM(V)1 and the VV2 subtypes, which we confirmed by semiquantitative analysis of cortical and striatal neuronal loss and astrocytosis. In sCJD CSF PENK and PDYN were associated with CSF biomarkers of neurodegeneration but not with clinical variables and showed a poor diagnostic performance. CSF PDYN and PENK-derived peptides had no significant diagnostic and prognostic values in sCJD; however, the distinct marker levels between molecular subtypes might help to better understand the basis of phenotypic heterogeneity determined by divergent neuronal targeting.     

Effects of the cosurfactant 1‐butanol and feed composition on nanoparticle properties produced by microemulsion copolymerization of styrene and methyl methacrylate

The concentration of the cosurfactant 1‐butanol (BuOH) determined the polymer weight and size for a series of poly(styrene‐co‐methyl methacrylate)s (P(St‐co‐MMA)) synthesized by the free‐radical (o/w) microemulsion technique. A factorial design established the levels of the experimental conditions for the polymerization i.e., concentration of the surfactant, sodium dodecyl sulfate (SDS); concentration of the cosurfactant, BuOH; temperature and ratio of the styrene (St) to methyl methacrylate (MMA). An increase in the weight‐average molecular weight (M_w) and number‐average molecular weight (M_n) was observed in the P(St‐co‐MMA) series with an increase in BuOH concentration from 1 to 5 wt %. These effects could arise from the micellar aggregation induced by interfacial BuOH. The unique micellar conditions could be exploited to synthesize copolymers of varying molecular weight and size. Additionally, the composition of the copolymers was virtually templates of the feed composition. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Konzept einer autarken elektrischen und thermischen Energieversorgung auf Basis von Photovoltaik

A photovoltaic system could supply a single-family house with electrical power, warm water, and room heat if the energy would be distributed over the year to suit the load profile. However, storage systems for this are not state of the art yet. A concrete example is used to estimate which parameters such a power storage system should have. A suitable electrochemical reaction system based on inorganic salt mixtures is proposed. The German Federal Ministry of Education and Research is currently funding the development of a world storage facility based on the same reaction system.     

Using machine learning models to explore the solution space of large nonlinear systems underlying flowsheet simulations with constraints

Flowsheet simulations of chemical processes on an industrial scale require the solution of large systems of nonlinear equations,so that solvability becomes a practical issue.Additional constraints from technical,economic,environmental,and safety considerations may further limit the feasible solution space beyond the convergence requirement.A priori,the design variable domains for which a simulation converges and fulfills the imposed constraints are usually unknown and it can become very time-consuming to distinguish feasible from infeasible design variable choices by simply running the simulation for each choice.To support the exploration of the design variable space for such scenarios,an adaptive sampling technique based on machine learning models has recently been proposed.However,that approach only considers the exploration of the convergent domain and ignores additional constraints.In this paper,we present an improvement which particularly takes the fulfillment of constraints into account.We successfully apply the proposed algorithm to a toy example in up to 20 dimensions and to an industrially relevant flowsheet simulation.     

Improvement of part load efficiency of a combined cycle power plant provisioning ancillary services

According to the type of ancillary service provisioned, operation mode of a power plant may change to part load operation. In this contribution, part load operation is understood as delivering a lower power output than possible at given ambient temperature because of gas turbine power output control. If it is economically justified, a power plant may operate in the part load mode for longer time. Part load performance of a newly built 80 MW combined cycle in Slovakia was studied in order to assess the possibilities for fuel savings. Based on online monitoring data three possibilities were identified: condensate preheating by activation of the currently idle hot water section; change in steam condensing pressure regulation strategy; and the most important gas turbine inlet air preheating. It may seem to be in contradiction with the well proven concept of gas turbine inlet air cooling, which has however been developed for boosting the gas turbine cycles in full load operation. On the contrary, in a combined cycle in the part load operation mode, elevated inlet air temperature does not affect the part load operation of gas turbines but it causes more high pressure steam to be raised in HRSG, which leads to higher steam turbine power output. As a result, less fuel needs to be combusted in gas turbines in order to achieve the requested combined cycle’s power output. By simultaneous application of all three proposals, more than a 2% decrease in the power plant’s natural gas consumption can be achieved with only minor capital expenses needed.     

A randomized controlled trial of cognitive behavioral therapy for adherence and depression (CBT-AD) in HIV-infected individuals.

Objective: To evaluate cognitive-behavioral therapy to enhance medication adherence and reduce depression (CBT-AD) in individuals with HIV. Design: A two arm, randomized, controlled, cross-over trial comparing CBT-AD to enhanced treatment as usual only (ETAU). ETAU, which both groups received, included a single-session intervention for adherence and a letter to the patient's provider documenting her or his continued depression. The intervention group also received 10 to 12 sessions of CBT-AD. Main Outcome Measures: Adherence to antiretroviral therapy as assessed by Medication Event Monitoring Systems (MEMs) and depression as assessed by blinded structured evaluation. Results: At the acute outcome assessment (3-months), those who received CBT-AD evidenced significantly greater improvements in medication adherence and depression relative to the comparison group. Those who were originally assigned to the comparison group who chose to cross over to CBT-AD showed similar improvements in both depression and adherence outcomes. Treatment gains for those in the intervention group were generally maintained at 6- and 12-month follow-up assessments. By the end of the follow-up period, those originally assigned CBT-AD demonstrated improvements in plasma HIV RNA concentrations, though these differences did not emerge before the cross-over, and hence there were not between-groups differences. Conclusions: CBT-AD is a potentially efficacious approach for individuals with HIV struggling with depression and adherence. Replication and extension in larger efficacy trials are needed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)