An experimental study of non-newtonian fluid flow in fluidized beds: minimum fluidization velocity and bed expansion characteristics

In this work, new experimental measurements of the minimum fluidization velocity and velocity-voidage characteristics are reported for a variety of liquid-particle systems in glass columns of two different diameters. Three types of liquids, namely, Newtonian, visco-inelastic, and visco-elastic fluids, were used to fluidize the beds of glass particles of four different sizes (1.27–15.8 mm). The results obtained with Newtonian liquids conform to the expected behaviour. The applicability of a variety of equations has been examined with a view to predicting the values of the minimum fluidization velocity and fluidization index for non-Newtonian systems. The experimental results reported herein embrace the following ranges of conditions: 1.27 < D_p < 15.8 mm; D_T = 50.8 and 101.6 mm, and 0.382 n 1.00.     

Supergain antennas: possibilities and problems

In principle, any desired amount of gain can be developed from an antenna of arbitrary size. The phenomena of high gain from very small antennas is called “supergain”. To see why this statement might be so, the author recalls the construction used in optics, known as Huygens' principle. This states that every point on a wavefront can be regarded as a source of radiation. At the end of a short period of time, the envelope of all of these individual wavelets forms the new wavefront. For example, this construct explains why a shadow is not perfectly sharp, and why interference fringes form. End fire antennas, dipole antennas, Yagi antennas and quad antennas are examined     

Experience in developing ultrahigh capacity compressor stages

Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 2, pp. 4–7, February, 1992.     

Precision of micromilled x-ray masks and exposures

 Micromechanical milling has been shown to be a rapid and direct method for the fabrication of structures with the geometry and size suitable for use as x-ray mask absorbers. While the micromilling process can not duplicate the size and resolution of absorber patterns created by high energy electron beam or optical lithography methods, micromilling can repeatedly create absorber line widths down to 10 micrometers, or less, with a one-sigma tolerance of 0.5 micrometers. A method for easily characterizing milling tool run out has been adapted so tool change out can be more routine. The milling process leaves some absorber burrs and the absorber is apparently tapered at the machined wall which introduce process biases, both of which add to exposure degradation. Nevertheless, based on work to date, it appears both of these effects can be reduced to acceptable limits. Received: 25 August 1997/Accepted: 3 September 1997     

Simple digital control improving dynamic performance of powerfactor preregulators

This paper presents the practical implementation of a fully digital control for boost power factor preregulators (PFPs). The control algorithm, which is simple and fast, provides a significant improvement in the system's dynamic performance compared to the usual analog control techniques. The paper discusses the design criteria and the actions taken for the implementation of the digital control, which is performed by means of a standard microcontroller (Siemens 80C166). The effectiveness of the approach is assessed by experimental tests     

A multiple-switch high-voltage DC-DC converter

Series connection of power devices has evolved into a mature technique and is widely applied in HV DC power systems. Static and dynamic voltage balance is ensured by shunting individual devices with dissipative snubbers. The snubber losses become pronounced for increased operating frequencies and adversely affect power density. Capacitive snubbers do not exhibit these disadvantages, but they require a zero-voltage switching mode. Super-resonant power converters facilitate the principle of zero-voltage switching. A high-voltage DC-DC power converter with multiple series-connected devices is proposed. It allows the application of nondissipating snubbers to assist the voltage sharing between the multiple series-connected devices and lowers turnoff losses. Simulation results obtained with a circuit simulator are validated in an experimental power converter operating with two series-connected devices. The behavior of the series connection is examined for MOSFETs and IGBTs by both experimental work with a 2 kW prototype and computer simulation. Applications can be found in traction and heavy industry, where the soft-switching power converter is directly powered from a high-voltage source     

In search of therapeutic nursing: subacute care

A form of 'intermediate' care exists in the USA which parallels the work of nurse-led units in the UK. This article describes subacute care, the term used for in-patient facilities for post-operative care and rehabilitation, and looks at its application in the USA. The work of such units is detailed and compared with similar units in the UK.