Fluidised pellet bed bioreactor: a promising technology for onsite wastewater treatment and reuse.

A pilot-scale fluidised pellet bed (FPB) bioreactor, which combines chemical coagulation, biological degradation, particle pelletisation and separation in one unit, was applied for onsite wastewater treatment and reuse. As a result of rational use of inorganic coagulant and organic polymer and moderate mechanical agitation, spherical particles were generated in the upflow column and a well-fluidised bed was formed. With a continuous supply of dissolved oxygen through a recycling loop, an aerobic condition was kept in the bottom section of the FPB column. Under such conditions the pellets in the FPB column showed the following characteristics: (1) compact structure and high density; (2) rich in microorganisms; and (3) high MLSS and MLVSS concentrations. Therefore, the FPB bioreactor achieved more than 90% removal of SS, COD, BOD and TP from raw domestic wastewater within a total hydraulic retention time (HRT) of only about 30 minutes. It also showed nitrification and denitrification ability and the TN removal could be about 50% as the recycling ratio was increased to 1:1. The treated water quality is generally competitive with the secondary effluent from a conventional activated sludge process. With these advantages the FPB bioreactor is recommendable as a compact system for onsite wastewater treatment and reuse.     

Experience with the antibiotic resistance analysis and DNA fingerprinting in tracking faecal pollution at two lake beaches.

Posting or closing of swimming beaches because of faecal contamination is a widespread problem reported in many locations. In a risk-based approach to this problem, the risk to swimmers' health is assessed by field monitoring of indicator bacteria and the associated risks are managed by source controls and other remedial measures. In risk assessment, great advances have been made in recent years with the introduction of microbial source tracking (MST) techniques. Two such techniques, antibiotic resistance analysis and DNA fingerprinting, were applied in a study of causes of faecal contamination at two lake beaches in Toronto, Ontario. Both methods identified bird faeces as the dominant sources of E. coli. Coping with this type of pollution presents a major environmental challenge.     

Self-aligned diffusion technique for n-InP JFETs

A self-aligned diffusion process has been demonstrated in the fabrication of n-InP JFETs on semi-insulating InP. This process utilises the anisotropic and selective etching properties of InP/GaInAs materials. Using this technique, sub-micrometre gate lengths can be achieved even with conventional photolithography. Devices with trans-conductance of >35mS/mm, leakage current of < 10nA/mm and gate capacitance of <0.7pF/mm have been fabricated with a cutoff frequency of 7 GHz.     

卤化银探测器及其某些特性

文中简述了卤化银(主要是溴化银)单晶片的某些特性,氯化银单晶片与此大致相似。作为低温晶体探测器,对~(241)Am-α放射源,分辨率为17%。卤化银晶片是固体电解质,只有Ag离子对输出电信号有贡献,有显著的极化现象。在液氮槽内溴化银晶片的电导率在几个数量级内成为可控的,由在室温下外加偏置电压大小所引起的分解状态下的初始电流决定。     

Comportement thermique de differents types d'habitation soumis a un ensoleillement et à une température extérieure périodiques

This paper presents the response of different kinds of schematic dwellings under daily periodic variations of the solar flux and the external temperature. The influence of the parameters which are characteristic of coupled heat transfer is studied (thermal diffusion and heat storage in external and internal walls, heat loses or solar heat supply by windows or airing).Calculations show that for an idealised regulation: (i) The energetical consumption depends only on mean variations of external temperature and solar flux and does not depend on the insulation location. (ii) For a building with a regulated internal temperature, the thermal inertia for the internal walls does not play a role. (iii) For an unregulated building, the internal temperature variations depends of the insulation location. The best location is the external one. (iv) There is an optimal thickness of walls corresponding to the daily periodic variations.     

Industrial and spatial interdependency in modeling: An employment forecasting model for the counties in the San Francisco Bay Region

This paper discusses the structure and empirical estimation of the County Employment Forecasting System (CEFS), a system used to forecast employment for 32 sectors for each one of the nine counties of the San Francisco Bay Region. CEFS differs in several aspects from the majority of models which attempt to simulate employment change at the subregional level; it explicitly considers the relationships between sectors, it accounts for the interactions between counties, and can provide a set of county forecasts which are consistent with the overall regional projections.     

Nonlinear inverse problem of reconstructing transport coefficients

The inverse coefficient problem for the quasilinear heat-conduction equation is solved numerically.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 49, No. 6, pp. 909–915, December, 1985.     

Analysis of the effect of polypyrrole synthesis conditions on its capacity to reduce hexavalent chromium

This paper reports the capacity of polypyrrole to reduce toxic hexavalent chromium (Cr(VI)). The influence of using different electrolytes during the polymer's synthesis has been studied. To improve the reduction of Cr(VI), the parameters considered were the polypyrrole morphology and the amount of conducting polymer. Polypyrrole obtained by cyclic voltammetry at a low sweep rate using KBr as supporting electrolyte showed better performance for Cr(VI) reduction compared to coatings obtained by constant potential or cyclic voltammetry at high sweep rates.     

Alternative market arrangements for technology transfer

With the rapid expansion of markets for telecommunications services and equipment, both national and international, one sees an increasing frequency of alliances in which each of two firms seeks to use the other to complete its portfolio strengths. Often this combination enables firms to achieve the product differentiation that seems to be the key to competitive advantage in modern telecommunications markets. This alliance may take the form of a « joint venture », which in the paper includes as limiting cases a subsidiary wholly owned by one firm, a technology licensing arrangement, and direct exporting. The model of such a venture presented here, although simple, is rich enough to illustrate the influence of four types of factors on the negotiations that set up the venture: demand, costs, risk, and regulatory constraints. We characterize the sets of acceptable and efficient arrangements, under various assumptions about exogeneous factors. The partners must choose among these by some form of bargaining.