Fabrication and characterization of poly(methyl methacrylate)/CaCu3Ti4O12 composites

Composites comprising Poly(Methyl Methacrylate) (PMMA) and CaCu₃Ti₄O₁₂ (CCTO) via melt mixing followed by hot pressing were fabricated. These were characterized using X‐ray diffraction, thermo gravimetric, scanning electron microscopy, and Impedance analyzer for their structural, morphology, and dielectric properties. Composites were found to have better thermal stability than that of pure PMMA. The composite, with 38 Vol % of CCTO (in PMMA), exhibited remarkably low dielectric loss at high frequencies and the low frequency relaxation is attributed to the space charge polarization/MWS effect. Theoretical models were employed to rationalize the dielectric behavior of these composites. At higher temperatures, the relaxation peak shifts to higher frequencies, due to the merging of both β and α relaxations into a single dielectric dispersion peak. The AC conductivity in the high frequency region was attributed to the electronic polarization. POLYM. ENG. SCI., 54:551–558, 2014. © 2013 Society of Plastics Engineers     

Thermal Expansion of Alkaline‐Doped Lanthanum Ferrite Near the Néel Temperature

The thermal expansion and magnetic behaviors of divalent, alkaline‐doped lanthanum ferrites (La_0.9M_0.1FeO₃, M=Ca, Sr, Ba) were assessed using a combination of dilatometry, magnetometry, time‐of‐flight neutron diffraction, and high‐temperature X‐ray diffraction. Néel temperatures were determined through vibrating sample magnetometry and correlated well with changes in thermal expansion behavior observed during both dilatometry and X‐ray diffraction. The Néel temperatures observed for pure, Ca‐doped, Sr‐doped, and Ba‐doped lanthanum ferrites were 471°C, 351°C, 465°C, and 466°C, respectively. The effect of divalent substitutions on the magnetic behavior are attributed to charge compensation mechanisms and structural changes in the material.     

Improved electro-assisted removal of phosphates and nitrates using mesoporous carbon aerogels with controlled porosity

Three-activated carbon aerogels were synthesized by CO₂ activation of the materials prepared by the polycondensation of resorcinol and formaldehyde mixtures followed by supercritical drying. The obtained carbon aerogels were characterized and used as electrode materials for the electrosorption of sodium phosphate and nitrate. X-ray diffraction and Raman spectroscopy showed the dependence of the structural ordering of the aerogels with the resorcinol/catalyst ratio and the extent of activation. The electrosorption capacitance evaluated by cyclic voltammetry revealed large values for the activated samples containing a large contribution of mesopores, regardless the electrolyte salt. Due to an adequate combination of chemical and porous features, the desalting capacity of the activated carbon aerogel electrodes exceeded that of the as-prepared materials. The evaluation of the kinetic properties by chronocoulometric relaxation and impedance spectroscopy showed a decrease of time constant and resistances for highly mesoporous activated samples. A high deionization capacity and fast electrode discharge was detected for the deionization of sodium nitrate on the highly mesoporous activated aerogel. Data also showed the efficient electrosorption of ionic species on consecutive charge/discharge cycles, confirming the stability of the aerogel electrodes at the high applied potentials.     

Brassica Plant Responses to Mild Herbivore Stress Elicited by Two Specialist Insects from Different Feeding Guilds

Compensation growth and chemical defense are two components of plant defense strategy against herbivores. In this study, compensation growth and the response of primary and secondary metabolites were investigated in Brassica rapa plants subjected to infestation by two herbivores from contrasting feeding guilds, the phloem-feeding aphid Brevicoryne brassicae and the leaf-feeding caterpillar Pieris brassicae. These specialist herbivores were used at two different densities and allowed to feed for seven days on a young caged leaf. Changes in growth rates were assessed for total leaf area and bulb mass, whereas changes in primary and secondary metabolites were evaluated in young and mature leaves, roots, and bulbs. Mild stress by caterpillars on young plants enhanced mean bulb mass and elicited a contrasting regulation of aliphatic and indolic glucosinolates in the leaves. In contrast, mild stress by aphids enhanced leaf growth and increased glucosinolate concentrations in the bulb, the most important storage organ of B. rapa. A similar mild stress by either herbivore to older plants did not alter plant growth parameters or concentrations of the metabolites analyzed. In conclusion, Brassica plant growth was either maintained or enhanced under mild herbivore stress, and defense patterns differed strongly in response to herbivore type and plant development stage. These results have implications for the understanding of plasticity in plant defenses against herbivores and for the management of Brassica rapa in agroecosystems.     

Correlation of Vibroacoustic Signal with Ceramic Component Wear During Frictional Interaction with a Steel Disc

Refractories and Industrial Ceramics - Complete correlation between dimensions of the wear area on specimens made of oxide-carbide ceramics and the root-mean-square value of vibration acceleration...     

A Novel Approach on Reusing Silicon Wafer Kerf Particle as Potential Filler Material in Polymer Composite

Silicon - In solar panel production stage, it is unavoidable to neglect the huge amount of solar grade silicon particles displaced during the slicing of silicon ingot operation. A subject of the...     

Influence of Waste Glass Powder as an Aluminosilicate Precursor in Synthesizing Ternary Blended Alkali-Activated Binder

Silicon - The formation of alkali-activated binders from industrial end products and landfill materials attracts considerable interest in construction technology since it diminishes the waste...     

Effect of Back-and-Forth Transfer of Iron and Chromium in Formation of Coatings by Iodine Transport

Metal Science and Heat Treatment - Results of a study of transportation of chromium and iron by iodine at various temperatures of diffusion chromizing of armco iron are presented. The phase...     

Modeling and Optimization of the Effect of Sintering Parameters on the Hardness of Copper/Graphene Nanosheet Composites by Response Surface Methodology

Metal Science and Heat Treatment - Composites obtained by powder metallurgy from a mixture of copper powders and graphene nanosheets are studied. The response surface methodology is used to design...