Cr-Mo solid solutions forced by high-energy ball milling

Mixtures of Cr and Mo elemental powders, with the nominal compositions Cr₂₅Mo₇₅, Cr₅₀Mo₅₀, and Cr₇₅Mo₂₅, are processed by high-energy ball milling at ambient temperature. Milling is observed to force the mixing of the immiscible bcc elements Cr and Mo into solid solutions. The lattice parameter of these solid solutions, measured by X-ray diffraction (XRD), displays the expected positive deviation from Vegard’s law. These deviations are compared to the ones predicted by Eshelby’s inclusion model for dilute alloys. The conventional Williamson-Hall approach is shown to fail to determine the grain size in as-milled samples, probably due to the high density of dislocations. Annealing at 700 °C for 10 hours under argon leads to a large reduction in structural defect density, without inducing any significant decomposition. The mixing measured in Cr-Mo is discussed in the broader context of the mechanical mixing forced by ball milling in moderately immiscible systems.     

Second-order stresses and strains in heterogeneous steels: Self-consistent modeling and X-ray diffraction analysis

Theoretical and experimetal methods have been developed to characterize the effect of mechanical loading on the mesoscopic and macroscopic mechanical state of polycrystalline materials. Ferritic and austenitic single-phase materials were first analyzed, then phase interaction was studied in a multiductile phase material (austeno-ferritic duplex steel) and a natural reinforced composite (pearlitic steel). The theoretical method is based on the self-consistent approach in which elastic and plastic characteristics of the phases have been applied through the micromechanical behavior of single-crystal-using slip systems and microscopic hardening. The effects of a crystallographic texture and phase interaction during loading and after unloading were studied. The elastic and plastic anisotropy of the grains having the same crystallographic orientation were assessed by diffraction strain analysis. The simulation was compared with the experiments performed using the X-ray diffraction technique. In the considered duplex and pearlitic steels, it was observed that the ferrite stress state is much lower than the austenite and cementite ones. The results of diffraction strain distribution have showed the pertinence of the models and give valuable information, for example, for the yield stress and the hardening parameters of each phase in a two-phase material.     

Effect of broaching on high-temperature fatigue behavior in notched specimens of INCONEL 718

Notches were machined in specimens of INCONEL 718 by a broaching process, where differing broaching runs led to differing extents of subsurface deformation and surface roughness. Fatigue tests were carried out at 600 °C with a trapezoidal loading waveform at 0.25 Hz. The broaching process that led to the more severe subsurface deformation (but lower surface roughness) showed the worst fatigue performance. Analysis of total strain amplitude in the notch root with the aid of an elastoplastic finite-element (FE) model showed that the work hardening related to the subsurface deformation caused by the different broaching can account for the difference in fatigue lives. Differences in initiation and growth behavior were seen for the two broached finishes as well as for broached and subsequently polished samples. These differences are discussed in terms of a change in crack growth initiation and growth mechanisms due to the presence of the work-hardened layer.     

Micromechanical approach to damage mechanics of composite materials with fabric tensors

The purpose of this study is to apply continuum damage mechanics – introduced through the concept of fabric tensors – to composite materials within the framework of the theory of elasticity. A directional data model of damage mechanics for composite materials will be developed using fabric tensors. The introduction of fabric tensors into the analysis of damage of composite materials will allow for an enhanced and better understood physical meaning of damage. The micromechanical approach will be used here to relate the damage effect through fabric tensors to the behavior of composite materials. In this approach, damage mechanics is introduced separately to the constituents of the composite material through different constituents’ damage effect tensors. The damaged properties of the composite system as a whole can then be obtained by proper homogenization of the damaged properties of the constituents.

The derivation of a generalized formulation of damage evolution will be shown here in a mathematically consistent manner that is based on sound thermodynamic principles. Numerical examples will be presented to show applicability. In addition, damage evolution for the one-dimensional tension case is also illustrated.     

On one boundary-value problem for the Laplace equation

We have derived a Fredholm-type equation of the second kind for a directional derivative problem arising in the stationary theory of heat conduction. One result of Ya. B. Lopatinskii has been refined. __________ Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 80, No. 2, pp. 197–200, March–April, 2007.     

When danger lurks in the background: Attentional capture by animal fear-relevant distractors is specific and selectively enhanced by animal fear.

Across 2 experiments, a new experimental procedure was used to investigate attentional capture by animal fear-relevant stimuli. In Experiment 1 (N = 34), unselected participants were slower to detect a neutral target animal in the presence of a spider than a cockroach distractor and in the presence of a snake than a large lizard distractor. This result confirms that phylogenetically fear-relevant animals capture attention specifically and to a larger extent than do non-fear-relevant animals. In Experiment 2 (N = 86), detection of a neutral target animal was slowed more in the presence of a feared fear-relevant distractor (e.g., a snake for snake-fearful participants) than in presence of a not-feared fear-relevant distractor (e.g., a spider for snake-fearful participants). These results indicate preferential attentional capture that is specific to phylogenetically fear-relevant stimuli and is selectively enhanced in individuals who fear these animals. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Low temperature synthesis of aluminium titanate by an aqueous sol-gel route

Formation of aluminium titanate (AT) has been achieved at low temperature through sol-gel process using boehmite and titanium hydroxide as precursors by controlling the particle size at nanoscale followed by in-situ peptisation. The formations of AT phase, particle size distributions, sintering and thermal expansion characteristics, and microstructural features have been reported. DTA and XRD analysis have been performed to confirm the formation of AT. A 94% relative density was obtained for aluminium titanate sintered at 1550 °C with controlled grain size in the range of 2-3 μm.     

Electron Thermalization in Metallic Islands Probed by Coulomb Blockade Thermometry

We describe a systematic series of experiments on thermalization of electrons in lithographic metallic thin films at millikelvin temperatures using Coulomb blockade thermometry (CBT). Joule dissipation due to biasing of the CBT sensor tends to drive the electron system into non-equilibrium. Under all experimental conditions tested, the electron-electron relaxation is fast enough to ensure thermal electron distribution, which is also in agreement with the theoretical arguments we present. On the other hand, poor electron-phonon relaxation plays a dominant role in lifting the electron temperature above that of the bath. From a comparison of the results with the theoretical current-voltage characteristics of the thermometers we precisely determine the electron-phonon coupling constant for the common metals used. Our experiments show that it is a formidable task to attain thermal equilibrium with the bath using single-electron devices under non-zero bias conditions at 20–50 mK temperatures that are typically encountered in experiments. The conclusion concerning Coulomb blockade thermometry is more optimistic and two-fold: (1) One can now correct the errors due to bias heating in a satisfactory manner based on known material properties and the size of the metal films in the sensor. (2) Reliable thermometry down to 20 mK requires islands whose volumes are >10^?15 m³, which is still acceptable both from the parameter (capacitance) and fabrication points of view.     

Low Temperature Acoustic Properties of Poly-Crystalline Aluminium

As in other structurally disordered solids, the low temperature acoustic properties of poly-crystalline aluminium are governed by atomic two-level tunneling systems. The particular temperature variation of sound velocity and internal friction depends on the dynamical behaviour of these tunneling systems, which is expected to be determined by interaction with thermal phonons and conduction electrons as in metallic glasses. In earlier measurements on aluminium-wires no significant difference was found whether the sample was superconducting or kept in the normal state by a sufficiently high magnetic field and the concluding claim was ‘absence of electron-assisted relaxation for tunneling systems in poly-crystalline metals’. In this report, vibrating reed measurements are presented of pure poly-crystalline Al with a special sample shape that reduces the influence of the clamping. We in fact find significant differences between the sample being normal conducting or superconducting. The overall behaviour indeed resembles very closely that of metallic glasses and clearly demonstrates that also in Al tunneling systems couple to conduction electrons as expected. As a quantitative result we may state that the density of states of tunneling systems in poly-crystalline Al is considerably smaller than in metallic glasses. PACS numbers: 61.43.-j, 62.65.+k, 63.50.+x