Virtual teamwork in very large undergraduate classes

Collaborative work is an important part of tertiary education but it is very difficult to arrange and supervise for extremely large classes of students in their first year. The possibility that computer-mediated communication can be used to facilitate this type of learning is appealing from a pragmatic organisational point of view. This paper explains in detail what a ‘virtual team’ is in the educational context. It reports on an interpretive field study where students taking an introductory course were allowed to choose where and when they did the required collaborative work. The paper discusses the factors that should be taken into account when offering students the option of working as a virtual team. These include factors that influence the students’ choice. The project cannot be considered to have been successful but indicates reasons for the lack of success and suggests contexts in which it would be valuable to repeat the project. The importance of extensive preparation in terms of teaching the students necessary social and technological skills cannot be over emphasised.     

Microwave Demulsification in Removing Naphthenic Acids from Diesel Oil

Emulsification is an undesired phenomenon in the refining of highly acidic oil by alkali-washing electro-refining. In this article, a novel microwave method is applied for demulsification in the removing of naphthenic acid from diesel oil. The internal heating is attributed to molecular rotation and ionic conduction. The decrease of interface zeta-potential and the viscosity of diesel oil are responsible for the demulsification with microwave irradiation. The results exhibited that the demulsification rate is maximized when the optimum microwave irradiation power, exposure time, and irradiation pressure for Anshan and Liaohe diesel oil are deemed to be 375 W, 5/6 min and 0.05 MPa, respectively.     

Mössbauer spectroscopic studies of Fe-substituted YIG

Compositional dependence of hyperfine parameters, determined through Mössbauer spectral analysis has been studied for Y_3−xFe_5+xO₁₂ (x = 0.0, 0.1, 0.3 and 0.5) garnet system at 300 K. The Mössbauer spectra have been fitted with three sextets in the ferrimagnetic state corresponding to Fe³⁺ ions at tetrahedral (d), octahedral (a) and dodecahedral (c) sites of the crystal structure. It is observed that isormershift, quadrupole shift and hyperfine field of d-site show no significant variation with Fe³⁺ concentration. The change in hyperfine fields of a- and c-sites with composition (x) has been explained on the basis of strength of exchange integrals, change in isomershift can be understood due to s-electron charge distribution and asymmetric displacement of oxygen ions surrounding the a- and c-sites seems to be responsible for observable quadrupole shift. The magneton number values obtained from magnetization and Mossbauer data are in agreement to those calculated using Neel's three sublattice model of ferrimagnetism.     

Effect of powder painting procedures on the filiform corrosion of aluminium profiles

In this work, the filiform corrosion behaviour of powder painted aluminium profiles was studied, and the coating barrier properties together with adhesion to the substrate were analysed. Samples coated with a traditional painting procedure (one powder layer application followed by curing), and other samples coated using a special cycle to obtain wood grain effect were compared using accelerated filiform corrosion tests. Moreover, in order to better understand the degradation mechanisms of painted metal substrates, thermal stresses were applied to accelerate the natural weathering. The effects of the thermal aging were analysed by electrochemical impedance spectroscopy.     

Selecting optimum density of lattice of blades of screw pump impeller

A method is proposed for calculating the optimum density of lattice of blades of screw pump impeller that ensures, for a given cavitation margin (inlet pressure), the first critical condition on the partial cavitation characteristic of the pump. The equations obtained can be used also to calculate the permissible cavitation margin of screw centrifugal and screw mixed-flow pumps as well as of stand-alone screw impeller, provided the geometric and operating conditions of the screw are given. __________ Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, No. 6, pp. 29–33, June, 2007.     

Thirty years later: Attitudes toward the employment of older workers.

Replicated W. K. Kirchner and M. D. Dunnette's (see record 1955-03161-001) study on attitudes toward older workers with 71 male and 5 female hourly employees (aged 18–61 yrs) and 22 male supervisors (aged 27–63 yrs) of a nonunion manufacturing plant. Ss completed a questionnaire that was nearly identical to the one administered in the Kirchner and Dunnette study. Results are similar to those obtained in the earlier study: Hourly workers held more positive attitudes toward older employees than did supervisors, and attitude score correlated strongly with the age of hourly workers but not with the age of supervisors. (9 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Self-powered wireless temperature sensors exploit RFID technology

Emerging RFID technology lets us embed sensors into a very small chip, creating a wireless sensing device. So, we set out to develop such a single-chip versatile temperature sensor. We also wanted to be able to transfer our design to an implantable temperature sensor for an animal healthcare application with minimal structural modification. We discuss the implementation of temperature sensor. The fully integrated complementary metal-oxide semiconductor (CMOS) batteryless device measures temperature and performs calibration to compensate for the sensor's inherent imperfections. An RF link using passive RFID's backscattering technique wirelessly transmits the data to a reading device while extracting power from the same "airwave," letting the device operate anywhere and last almost forever. The entire microchip, including the temperature sensor, consumes less than a few microamperes over a half a second, so the scanning device can capture data from longer read distances.     

The microscopy cell (MicCell), a versatile modular flowthrough system for cell biology, biomaterial research, and nanotechnology

We describe a novel microfluidic perfusion system for high-resolution microscopes. Its modular design allows pre-coating of the coverslip surface with reagents, biomolecules, or cells. A poly(dimethylsiloxane) (PDMS) layer is cast in a special molding station, using masters made by photolithography and dry etching of silicon or by photoresist patterning on glass or silicon. This channel system can be reused while the coverslip is exchanged between experiments. As normal fluidic connectors are used, the link to external, computer-programmable syringe pumps is standardized and various fluidic channel networks can be used in the same setup. The system can house hydrogel microvalves and microelectrodes close to the imaging area to control the influx of reaction partners. We present a range of applications, including single-molecule analysis by fluorescence correlation spectroscopy (FCS), manipulation of single molecules for nanostructuring by hydrodynamic flow fields or the action of motor proteins, generation of concentration gradients, trapping and stretching of live cells using optical fibers precisely mounted in the PDMS layer, and the integration of microelectrodes for actuation and sensing.