Widespread microsatellite instability in sebaceous tumours of patients with the Muir-Torre syndrome

OBJECTIVE: Thoracic injury remains a major source of morbidity and mortality in urban trauma centers. With the advent and increasing expertise in video assisted thoracic surgery, this modality has become an attractive alternative in the management of patients with thoracic injury. This report will review our experience with video assisted thoracic surgery at a level I trauma center and attempt to further delineate the indications for and timing of thoracoscopy in thoracic trauma. METHODS: We identified 16 patients who had undergone video assisted thoracic surgery following chest trauma between July 1991 and June 1994. There were 15 penetrating and one blunt trauma. All 16 patients were initially treated with tube thoracostomy. From 0-20 days post-injury, video assisted thoracic surgery was attempted with either diagnostic or therapeutic intentions. RESULTS: Twelve of the 16 patients (75%) had successful thoracoscopy. Three patients had diaphragmatic injury excluded and nine patients had successful evacuation of clotted hemothoraces. Evacuation of clotted hemothorax up to 7 days post-injury was safe and easily accomplished. Four patients (25%) had unsuccessful thoracoscopy and were converted to standard thoracotomy; failure was attributed to either suboptimal single lung ventilation or severe pleural inflammatory reaction. The only death in the entire group occurred 10 days after a thoracotomy for retained hemothorax. The median post-operative hospital stay following successful video assisted thoracic surgery was 3.5 days. CONCLUSIONS: Video assisted thoracic surgery can be utilized as an effective and safe method for the initial diagnostic evaluation and surgical management of stable patients with penetrating thoracic trauma.     

Semiconductor laser dynamics for feedback from afinite-penetration-depth phase-conjugate mirror

Most of the previous treatments of semiconductor lasers subject to optical feedback from a phase-conjugate mirror (PCM) have assumed that the PCM responds instantaneously. Furthermore, the mechanism responsible for phase conjugation does not usually enter into the analysis. In this paper, we derive the time-dependent reflectivity of a PCM created through nondegenerate four-wave mixing in a Kerr-type nonlinear medium. The resulting laser dynamics are compared with the case of the ideal PCM, as a function of the external-cavity length, the PCM reflectivity, and the PCM interaction depth. The PCM with a significant interaction depth tends to suppress otherwise chaotic output and produces pulses whose repetition rate is tunable by varying PCM reflectivity. At high feedback levels, it stabilizes the laser output. We use the circle-map formalism to explain our numerical results     

Generation of frequency-chirped optical pulses in a large-slippagefree-electron laser

We have investigated the optical output of the free-electron laser for infrared experiments (FELIX) when it is driven by an electron beam with a ramped energy. We show that the applied slow ramp on the electron beam energy leads to a frequency chirp on each picosecond optical pulse. Typical values for the chirp are 0.2% frequency sweep across a 1.5-ps-long optical pulse. The optical pulses were analyzed with a double-grating pair and with a second-order autocorrelator. The pulse duration was reduced in the double-grating pair by 20%. A linear dependence of the chirp on the cavity desynchronization was measured     

Finite-difference time-domain analysis and experimental examinationof the performance of a coupled-cavity MQW laser/active waveguide at1.54 μm

The performance characteristics of a coupled cavity InGaAsP-InP MQW laser/active waveguide made by one-step epitaxy and well-controlled reactive ion etching (RIE) have been theoretically analyzed and experimentally determined. A theoretical model based on a finite-difference time-domain (FDTD) technique was used to simulate the propagation of an optical wave launched in the coupled system and determine the reflectivity of the facets created by RIE. The calculated effective reflectivity of the coupling region consisting of two facets and an air gap is between 0.45 and 0.55, which is in good agreement with the experimentally measured value of 0.5. The reflectivity of a single etched mirror derived from this value is estimated to be 0.3. A 120-μm-long monolithically integrated active waveguide when biased as a modulator and excited by the laser shows a maximum extinction ratio of 8 dB and a modulation bandwidth ⩾14 GHz at a dc bias of -0.5 V with a bias swing of 2 V     

Improved modulation techniques for PWM-VSI drives

PWM-VSI based AC motor drives have two main problems. The inverter is nonlinear which causes instability problems in some specific working points of the AC machine and it emits acoustic noise due to the switching frequency. Nonlinearities like dead-time in the inverter, load dependent DC-link voltage ripple and the voltage drop across the switches are modeled and compensated by improved modulation techniques in order to obtain an almost ideal inverter. Different feedback and feedforward techniques are proposed. The acoustic noise is reduced by using a random modulation strategy. Measurements show a significant improvement by using feedforward and feedback techniques for linearizing the inverter. An improvement in reduction of the acoustic noise emission is also achieved by using random modulation. It is concluded that a combination of a random modulation strategy and feedforward/feedback techniques gives an almost ideal AC motor drive system     

New developments in CdTe and CdZnTe detectors for X and γ-ray applications

There has been considerable recent progress in II-VI semiconductor material and in methods for improving performance of the associated radiation detectors. New high resistivity CdZnTe material, new contact technologies, new detector structures, new electronic correction methods have opened the field of nuclear and x-ray imaging for industrial and medical applications. The purpose of this paper is to review new developments in several of these fields. In addition, we will present some recent results at LETI concerning first the CdTe 2-D imaging system (20 × 30 mm² with 400 × 600 pixels) for dental radiology and second the CdZnTe fast pulse correction method applied to a 5 × 5 × 5 mm³ CdZnTe detector (energy resolution = 5% for detection efficiency of 85% at 122 keV) for medical imaging.     

Microbiological safety of kinema, a fermented soya bean food

Kinema is a fermented soya bean food of Nepal and the hilly regions of North-eastern States of India. Generally, the fermentation is dominated by Bacillus spp. that often cause alkalinity and desirable stickiness in the product. The present study was undertaken in a limited number of commercial (market) kinema samples to test for the presence of foodborne pathogens and their properties. Bacillus cereus was present in numbers exceeding 10⁴ cfu/g product in five of the tested 15 market samples. Enterobacteriaceae and coliform bacteria exceeded 10⁵ cfu/g in 10 of the 15 samples. Escherichia coli exceeding 10⁵ cfu/g was found in two samples. Staphylococcus aureus was not detected in any of the tested samples. Of 31 isolated typical and atypical strains of B. cereus, 18 representative strains were tested qualitatively for the ability to produce diarrhoeal type enterotoxin (BCET) using an Oxoid BCET-RPLA test kit. Overall, BCET was formed by 12 strains in BHIG (brain heart infusion broth +1% glucose), by seven strains on sterilized cooked rice, and by five strains on sterilized cooked soya beans. Semi-quantitative tests on BCET revealed that levels exceeding 256 ng/g soya beans, produced by single pure culture inoculation with the isolated B. cereus strains, were reduced to ≤ 8 ng/g by frying kinema in oil, a common procedure when making kinema curry. It was also shown in a mixed pure culture experiment that a kinema strain B. Subtilis DK-W1, is able to suppress growth and BCET formation by a selected toxin producing strain (BC7-5) of B. cereus. It is concluded that the traditional way of making kinema and its culinary use in curries is safe. However, for novel applications of kinema, safety precautions are advisable.     

Measurement of PLL phase error caused by power supply noise

The measurement of the accumulated phase error of phase-locked loops (PLLs) in microprocessor systems is discussed. A system which creates controlled power supply noise and measures the PLL response is described. Examples of the use of this technique are shown for a PLL used in a 400 MHz microprocessor