Theoretical analysis of control properties for the brushless doubly fed reluctance machine

The brushless doubly fed induction machine (BDFIM) has been extensively researched for approximately 30 years, but a related machine [the brushless doubly fed reluctance machine (BDFRM)], has not. This was mainly due to the fact that reluctance rotor designs were not capable of generating saliency ratios large enough to make the BDFRM competitive with other machines. However, recent developments in reluctance rotors, spurred on by research into synchronous reluctance machines, has resulted in high saliency ratio rotors that are economic to build. This, together with the promise of higher efficiency and simpler control compared to the BDFIM, means that further investigation of the BDFRM is warranted. A relatively limited amount of work to date has been published on the BDFRM. This paper attempts to fill this void by presenting a theoretical analysis of some of the important control properties of the ideal BDFRM.     

FLOCCULATION OF ASPHALTENES AT HIGH PRESSURE. II. CALCULATION OF THE ONSET OF FLOCCULATION

The influence of pressure on the onset of flocculation of asphaltenes was calculated in the region from 1 to 300 bar and from 50 to 100°C. These calculations are the counterpart to our experimental data which, recently, have been reported in part 1 of an equally titled article [9]. As gas component methane and as precipitant i-octane were used. The asphaltene flocculation was considered to be a liquid-liquid equilibrium. For modelling the van der Waals equation of state (vdW-EOS) in the framework of continuous thermodynamics was applied. The composition of the crude oil was described by a continuous distribution function with respect to the solubility parameter δ of the Scatchard-Hildebrand theory. Within the distribution the asphaltenes represent the species with the highest δ-values. For oils with a very low content of asphaltenes the model developed describes the experimental flocculation data reasonably. In accordance to the experimental data the model predicts that, in the considered pressure range, without addition of i-octane asphaltene flocculation does not occur. However, on contrary to the experimental results, the model predicts the asphaltenes to show a higher flocculation tendency with increasing asphaltene content of the crude oil. For very high asphaltene contents the model even completely fails. Probably, the reason of this lack is the disregarding of asphaltene association.     

一种洁净的、非接触性的新型粘合剂喷洒技术

介绍了Robatech公司开发的PFC喷嘴。这种喷嘴为标准化组件，具有较大的适用性，既适用于新厂配套，也适用于老设备改造。     

Properties of Carbopol Solutions as Models for Yield-Stress Fluids

ABSTRACT: The effect of pH on the non-Newtonian viscosity (η)of aqueous Carbopol 940 solutions is presented with high resolution (pH increments about 0.4) between pH = 2.8 and 12.7. Aqueous NaOH was used to adjust pH of 1.48 wt % Carbopol solutions. A Contraves viscometer was used to measure steady-flow shear stress at known shear rate (γ) over the range γ= 8 to 195 s⁻¹. Yield stresses and shear-thinning η(γ) were observed. Data were fitted with a Herschel-Bulkley model, whose parameters (including yield stress) were expressed as functions of pH. Comparisons were made of η(γ) to the dynamic viscometric properties η'(ω) and η*(ω) for comparable ranges of γ and frequency (ω): A fairly close match was found between η and η* but η«η'. pH dependence included previously unreported extrema of h(pH) in the range of pH = 6.2 to 6.6. Because of sensitive control of rheological properties with pH, Carbopol solutions can be used to mimic a great range of shear-thinning and yield-stress behavior that should make them useful for model studies directed toward process and equipment design and evaluation.     

Physical Aging of Amorphous Fructose

ABSTRACT: Physical aging of amorphous anhydrous fructose at temperature 5 °C and at 22 °C was studied using differential scanning calorimetry (DSC). The dynamic glass transition temperature, T_g0 for unaged samples was 16 °C and 13.3 °C for heating rate of 10 °C/min and 1 °C/min, respectively. The fictive temperature, T_f0 for unaged samples calculated by Richardson and Savill method was 12 °C, which is close to the dynamic value obtained from the lower DSC heating rate. The fictive temperature T_f of the aged fructose glasses at temperatures both below and above the transition region was fitted well by a non-exponential decay function (Williams-Watts form). Aging above the transition region (22 °C) for 18 d increased both the dynamic glass transition temperature T_g and the fictive temperature T_f. However, aging below the transition region (5 °C) for 1 d increased the dynamic glass transition temperature T_g but decreased the fictive temperature T_f.     

TMAOase Activity of European Hake (Merluccius merluccius) Organs: Influence of Biological Condition and Season

ABSTRACT: Trimethylamine N-oxide demethylase (TMAOase) activity of several internal organs of hake were studied for 2 consecutive y. The correlation between enzymatic activity and season of year, sex, weight, and length were analyzed. While kidney and spleen showed the highest activities, liver, heart, bile, and gall bladder activities were much lower, and in some cases they were below the detection limit. A correlation between TMAOase activity of kidney and season was found. During winter and spring (February to May), the months matching the spawning peak, high activities were detected, while in summer months the activity level was lower. TMAOase activity in the rest of the organs did not seem to have a seasonal influence. Keywords: TMAOase, season, biological condition, hake, soluble protein     

Performance and modeling of advanced Ti:LiNbO3 digitaloptical switches

High-performance Y-branch digital optical switches realized in Ti:LiNbO₃ are presented. Their switching response functions have been optimized in terms of switch voltage and crosstalk ratio. The optimization is based on analyzing different types of waveguide shaping and switching arrangements using coupled mode theory and computer simulations. Excellent switching characteristics are achieved with devices exploiting a specially shaped waveguide branch in a dilated switch arrangement. Demonstrated performances include switching voltage as low as 9 V with crosstalk suppression better than 45 dB and fiber-to-fiber losses as low as 4 dB. Polarization independence with crosstalk suppression better than 40 dB over a 1520- to 1570-nm wavelength range is achieved for any applied switch voltage greater than 18 V. These optimized digital optical switches have further demonstrated the capability to reshape electrical input signals at switching rates of several hundred megahertz     

Data-dependent k/sub n/-NN and kernel estimators consistent for arbitrary processes

Let X/sub 1/, X/sub 2/,... be an arbitrary random process taking values in a totally bounded subset of a separable metric space. Associated with X/sub i/ we observe Y/sub i/ drawn from an unknown conditional distribution F(y|X/sub i/=x) with continuous regression function m(x)=E[Y|X=x]. The problem of interest is to estimate Y/sub n/ based on X/sub n/ and the data {(X/sub i/, Y/sub i/)}/sub i=1//sup n-1/. We construct appropriate data-dependent nearest neighbor and kernel estimators and show, with a very elementary proof, that these are consistent for every process X/sub 1/, X/sub 2/,.     

Electronic properties of Fibonacci quasi-periodic heterostructures

We study the electronic states of different GaAs-AlAs Fibonacci quasi-perodic heterostructures grown along the (001) direction. We employ an empirical tight-binding Hamiltonian including spin-orbit coupling together with the surface Green function matching method. We present results for the eighth Fibonacci generation formed from different building blocks. We compare these results with those of the constituent quantum wells and with those of heterostructures containing the same number of GaAs and AlAs slabs after periodic repetition of the building blocks. No Fibonacci spectrum is found in the energy regions near the conduction and valence band edges of GaAs. A selective localization of the local density of states in the GaAs layers is found for many electronic states.     

Floating-island TFT leakage caused by process step reduction

The leakage mechanism for a top-gate thin-film transistor (TFT) produced using the fewest process steps in the industry is analyzed in order to achieve a high-contrast liquid crystal display (LCD). Using a T-shaped TFT structure, the OFF and ON channel lengths are defined independently, so that the leakage can be reduced with no ON current decrease