Preparation of Poly(D,L-Lactide/Glycolide) Nanoparticles of Controlled Particle Size Distribution: Application of Experimental Designs

This study investigates the use of the solvent evaporation method for preparing acid and glycolic acid-based copolymer nanoparticles. Initially, appropriate technological and formulation factors for elaboration of polymeric particles were selected by screening. Most favourable results were obtained using polyvinyl alcohol as a dispersing agent and a high pressure homogenizer to reduce the droplet size of the emulsion initially formed. On the basis of the conclusion thus drawn, a composite rotational experimental design was employed to evaluate the joint influence of three formulation variables (phase volume ratio of the emulsion formed, polymer concentration and homogenization pressure) on the micromeritic properties of the suspension finally obtained (mean particle size, coefficient of variation and polydispersity of the particle size distribution). Analysis of variance corresponding to the experimental design, showed a significant influence of the volume phase ratio and the polymer concentration on the mean particle size and the coefficient of variation, whereas the polydispersity is also affected by the homogenization pressure. Considering this information, a 3² experimental factorial design was then selected to investigate the possible interaction between the phase volume ratio and the concentration of polyvinyl alcohol in the aqueous phase. Analysis of variance and subsequent sequencial regression analysis evidenced last hypothesis providing the way to determine the experimental conditions required to achieve a specific particle size distribution.     

Ein stochastisches,schadensmechanisches Versagensmodell für Komposite

A stochastic damage mechanics failure model of composites This paper focuses on the theoretical simulation of strength and failure of specimens with nonlocal damage. A concept is proposed for quantitative interpretation and prediction of nonlinear. nominal stress-strain curves of damaged materials like fine ceramics or intermetallic alloys. For that reason methods of damage mechanics and of probability theory are combined.     

Influence of thermomechanical and mechanical processing on the fatigue resistance of VT3-1

The influence of the structure and crystallographic texture of VT3-1 alloy formed by thermomechanical processing of a forging and also of the production factors of subsequent production of a gas turbine engine blade from the forging on the fatigue resistance characteristics was investigated. It was established that the reason for the reduction in fatigue limit and the significant spread in test data is nonuniformity of the structure and texture, both in different forgings and within the same forging, caused by variations in such parameters of thermomechanical processing as the temperature and degree of deformation. The nonuniformity plays a determining role in the reduction in fatigue limit as the result of hydrogen absorption during chemical etching. It was shown that such an effect may be eliminated by degassing vacuum annealing and the general level of fatigue resistance characteristics may be increased as the result of thermomechanical processing of forgings with strict observance of the specified forging temperature.Translated from Problemy Prochnosti, No. 6, pp. 12–19, June, 1992.     

Air Filtration and Radon Decay Product Mitigation

Air cleaning as a means of mitigating the risks arising from exposure to indoor radon progeny has been evaluated in a single-family house in the north eastem US. using an automated, semi-continuous activity-weighted size distribution measurement system. The measurements included radon concentration, condensation nuclei count, and activity-weighted size distribution of radon decay products. Measurements were made in the house with and without an operating air filtration system and with various particle sources common to normal indoor activities operating. Aerosols were generated by running water in a shower, candle burning, cigarette smoking, vacuuming, opening doors, and cooking. Using a room model, the changes in attachment rates, average attachment diameters, and deposition rates of the unattached fraction with and without the air cleaning system were calculated. In the presence of active aerosol sources, the air filtration unit typically reduced the concentration of particles within the hour following the end of particle generation. After candle burning, cigarette smoking, and vacuuming in the bedroom, the reductions of PAEC by air filtration are about 60% with the air filtration system operating in the bedroom. During cooking in the kitchen, the reductions of PAEC in the bedroom with the air filtration system were about 40%. However, for all cases the dose reductions were smaller than the particle and PAEC reductions. For those particles that were generated within the bedroom, there was a 20% to 50% reduction in dose. In the case of cooking where the door was open and particles infiltrated from the rest of the house, the dose reduction was only 5% on average and appears to be insignificant. Thus, the dose reductions were h e r than the reductions in activity concentration, but there were no cases where the estimated dose actually increased.     

Die Langzeit-Korrosionsgeschwindigkeit des passiven Eisens in anaeroben alkalischen Lösungen

The long-term corrosion rate of passive iron in anaerobic alcaline solutions Gas generation is an important issue in safety assessments of low and intermediate level radioactive repositories. In this connection the hydrogen production from corrosion of passive iron in saturated calcium hydroxide, in dilute alkali hydroxide and cement porewater solutions has been determined. The measurements were performed manometrically using fusion sealed glass cells, the measurement periods being between 275 and 560 days. In 0.1 M and 0.04 M alkali hydroxide solutions the initial hydrogen generation rate was 12 mmol/m²yr corresponding to a linear corrosion rate of 64 nm/yr. The reaction rate decreases with time. The smallest value obtained after 330 days is 0.3 mmol/m²yr corresponding to 1.5 nm/yr. The influence on iron of the saturated calcium hydroxide solution and the calcic porewater solutions differs from that of the alkali hydroxide solutions. At pH 12.5 the hydrogen generation rate remains practically constant up to breaking off the experiment, the value being about 1 mmol/m²yr corresponding to 5 nm/yr.     

A problem of pursuit and evasion

A trajectory problem of pursuit and evasion on a plane is considered for the case of equal absolute velocities of the players. Exact solutions are obtained for fixed initial conditions.Translated from Kibernetika i Sistemnyi Analiz, No. 3, pp. 138–143, May–June, 1992.     

Measuring probe for fast transients monitoring in gas insulatedsubstation

This paper describes the construction of four probes adjusted for fast transient monitoring in 123 kV SF₆ insulated substations. The primary requirement was the ability to monitor without distortion very fast transients containing frequencies up to 200 MHz. The measuring system was tested and calibrated with the help of computer modeling techniques. The verified experimental apparatus was then used for testing and calibrating the measuring probes. During the test, various effects on the measuring system characteristics were analyzed with respect to materials used for the components of the system     

Development of a heart monitoring system with high-Tc DC-SQUID gradiometers

We investigated different types of high-T_c DC-SQUID gradiometers with the aim to develop an one-channel heart monitoring system for non-invasive measurements in unshielded environment. This system could be used to obtain information about the patients condition in serial examinations and in emergency cases fast and stable. Step-edge and bicrystal Josephson junctions were used to prepare planar galvanically coupled thin film gradiometers and magnetometers. These sensors were used to carry out measurements in well-shielded and non-shielded environment and we compared the different noise properties and field gradient resolutions. With different types and sizes of high-T_c DC-SQUID sensors magnetocardiograms were measured in a magnetically shielded room. The influence of antenna configurations, SQUID parameters, and cooling conditions on the measurement of magnetocardiograms will be discussed. We investigated possibilities to suppress the earth magnetic field (with pairs of Helmholtz coils) and for noise field compensation in unshielded environment.     

Renopancreatic transplant. Urologic complications

OBJECTIVE: Retrospective study of urological complications in our series of reno-pancreatic transplants. MATERIAL AND METHODS: Between February 1983 and May 1994 our group has conducted 93 RPT, 80 of which, mean age 36 +/- 6 years (24-54 years), are studied in this paper: 57 male and 23 female with an average time in dialysis of 20 +/- 15 months (0-84 months) and diabetes evolution of 21 +/- 5 years (11-37 years). RESULTS: Actuarial annual survival of patient, renal graft and pancreatic graft has been 85%, 79% and 74% respectively. Haematuria: 25% incidence, with graft pancreatitis etiology in 16 cases, rejection in 8 and urinary fistula in 6. Urinary infection: 85% incidence, symptomatic in 23 patients (29%) and asymptomatic in the remaining cases. Dysuria, urethritis and urethral stenosis: 14 patients, all male, most with both conditions associated. Reconversion of pancreatic exocrine secretion by intestinal route was performed in 7 patients. Urinary fistula: secondary to surgery in 9 cases and rejection in 4. Etiology of one case remained unknown. In 4 cases it was resolved with conservative treatment, and with surgical correction in 8. One patient required pancreatic transplantectomy and one patient died of AMI. CONCLUSIONS: Urological complication in RPT account for a significant morbidity, urinary fistula being the one with greater repercussion on the patient and pancreatic graft survival.     

Left ventricular outflow tract obstruction after mitral valve replacement

A method of posterior mitral annulus remodeling is presented. The posterior annulus is divided into three segments, each segment encircled by a suture that is passed in a tourniquet. Coaptation of the leaflets can be achieved by tightening the tourniquets while the ventricle is being filled. This technique is simple and quick, avoids the use of foreign material, and requires less expertise and judgment than traditional annuloplasties.