New One-Generator Quasi-cyclic Codes over GF(7)

Let [n,k,d] _q codes be linear codes of length n, dimension k, and minimum Hamming distance d over GF(q). In this paper, seventeen new codes are constructed, which improve the known lower bounds on minimum distance.     

Correlation analysis of geothermal data in North America

Correlation studies of the geothermal parameters have been carried out for Michigan Basin and the results are interpreted with the help of observed relations between heat flow, geological age and crustal thickness for North America. Heat flow and geothermal gradient are found to decrease with thermal conductivity, while they are positively correlated with each other, supporting the earlier findings of Negi et al. (1974). It is noted that, to some extent, these associations can be explained with the help of variations in crustal thickness.     

Characterization of hydrogen concentration in Zircaloy-4 using ultrasonic techniques

The relationship between hydrogen concentration precipitated as hydride particles and ultrasonic parameters, such as velocity and attenuation, was examined in Zircaloy-4 samples for potential applications in the Non-Destructive Test Field. Different amounts of hydrogen (up to 517 ppm) were introduced in the samples by gaseous charging. Ultrasonic attenuation measurements were performed with compressive waves at frequencies of 10 and 30 MHz, and propagation velocity measurements were performed at 10 MHz. Ultrasonic velocity showed an approximately linear increase with hydrogen concentration and it could be used as an assessment parameter when the hydrogen level is high enough. Attenuation versus hydrogen concentration has been fitted by a logarithmic equation at 10 MHz. At 30 MHz a fluctuating behavior of the attenuation prevented measurement of the hydrogen concentration.     

Virtual teamwork in very large undergraduate classes

Collaborative work is an important part of tertiary education but it is very difficult to arrange and supervise for extremely large classes of students in their first year. The possibility that computer-mediated communication can be used to facilitate this type of learning is appealing from a pragmatic organisational point of view. This paper explains in detail what a ‘virtual team’ is in the educational context. It reports on an interpretive field study where students taking an introductory course were allowed to choose where and when they did the required collaborative work. The paper discusses the factors that should be taken into account when offering students the option of working as a virtual team. These include factors that influence the students’ choice. The project cannot be considered to have been successful but indicates reasons for the lack of success and suggests contexts in which it would be valuable to repeat the project. The importance of extensive preparation in terms of teaching the students necessary social and technological skills cannot be over emphasised.     

Microwave Demulsification in Removing Naphthenic Acids from Diesel Oil

Emulsification is an undesired phenomenon in the refining of highly acidic oil by alkali-washing electro-refining. In this article, a novel microwave method is applied for demulsification in the removing of naphthenic acid from diesel oil. The internal heating is attributed to molecular rotation and ionic conduction. The decrease of interface zeta-potential and the viscosity of diesel oil are responsible for the demulsification with microwave irradiation. The results exhibited that the demulsification rate is maximized when the optimum microwave irradiation power, exposure time, and irradiation pressure for Anshan and Liaohe diesel oil are deemed to be 375 W, 5/6 min and 0.05 MPa, respectively.     

Mössbauer spectroscopic studies of Fe-substituted YIG

Compositional dependence of hyperfine parameters, determined through Mössbauer spectral analysis has been studied for Y_3−xFe_5+xO₁₂ (x = 0.0, 0.1, 0.3 and 0.5) garnet system at 300 K. The Mössbauer spectra have been fitted with three sextets in the ferrimagnetic state corresponding to Fe³⁺ ions at tetrahedral (d), octahedral (a) and dodecahedral (c) sites of the crystal structure. It is observed that isormershift, quadrupole shift and hyperfine field of d-site show no significant variation with Fe³⁺ concentration. The change in hyperfine fields of a- and c-sites with composition (x) has been explained on the basis of strength of exchange integrals, change in isomershift can be understood due to s-electron charge distribution and asymmetric displacement of oxygen ions surrounding the a- and c-sites seems to be responsible for observable quadrupole shift. The magneton number values obtained from magnetization and Mossbauer data are in agreement to those calculated using Neel's three sublattice model of ferrimagnetism.     

Effect of powder painting procedures on the filiform corrosion of aluminium profiles

In this work, the filiform corrosion behaviour of powder painted aluminium profiles was studied, and the coating barrier properties together with adhesion to the substrate were analysed. Samples coated with a traditional painting procedure (one powder layer application followed by curing), and other samples coated using a special cycle to obtain wood grain effect were compared using accelerated filiform corrosion tests. Moreover, in order to better understand the degradation mechanisms of painted metal substrates, thermal stresses were applied to accelerate the natural weathering. The effects of the thermal aging were analysed by electrochemical impedance spectroscopy.     

Selecting optimum density of lattice of blades of screw pump impeller

A method is proposed for calculating the optimum density of lattice of blades of screw pump impeller that ensures, for a given cavitation margin (inlet pressure), the first critical condition on the partial cavitation characteristic of the pump. The equations obtained can be used also to calculate the permissible cavitation margin of screw centrifugal and screw mixed-flow pumps as well as of stand-alone screw impeller, provided the geometric and operating conditions of the screw are given. __________ Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, No. 6, pp. 29–33, June, 2007.