Development of an evanescent wave fiber optic biosensor

Biosensors are uniquely qualified to meet the need for rapid, inexpensive analytical procedures. The authors' intent was to develop a simple, real-time immunoassay that could process multiple samples in a semi-automated manner, while maintaining maximum versatility to permit its application under various conditions. To achieve this goal, the authors have developed a biosensor which detects antibody-antigen binding within the evanescent wave of an optical biosensor     

Mechanistic Investigation of ROS-Induced DNA Damage by Oestrogenic Compounds in Lymphocytes and Sperm Using the Comet Assay

Past research has demonstrated that oestrogenic compounds produce strand breaks in the DNA of sperm and lymphocytes via reactive oxygen species (ROS). In the current investigation, sperm and lymphocytes were treated in vitro with oestrogenic compounds (diethylstilboestrol, progesterone, 17β-oestradiol, noradrenaline and triiodotyronine) and several aspects of DNA damage were investigated. Firstly, mediation of DNA damage by lipid peroxidation was investigated in the presence of BHA (a lipid peroxidation blocker). BHA reduced the DNA damage generated by 17β-oestradiol and diethylstilboestrol in a statistically significant manner. No effects were observed for sperm. Secondly, the presence of oxidized bases employing FPG and EndoIII were detected for lymphocytes and sperm in the negative control and after 24 h recovery in lymphocytes but not immediately after treatment for both cell types. The successful detection of oxidized bases in the negative control (untreated) of sperm provides an opportunity for its application in biomonitoring studies. DNA repair at 24 h after exposure was also studied. A nearly complete recovery to negative control levels was shown in lymphocytes 24 h recovery after oestrogenic exposure and this was statistically significant in all cases. Rapid rejoining of DNA, in a matter of hours, is a characteristic of DNA damaged by ROS.     

Asymptotic results for Fourier‐PARMA time series

Periodically stationary times series are useful to model physical systems whose mean behavior and covariance structure varies with the season. The Periodic Auto‐Regressive Moving Average (PARMA) process provides a powerful tool for modelling periodically stationary series. Since the process is non‐stationary, the innovations algorithm is useful to obtain parameter estimates. Fitting a PARMA model to high‐resolution data, such as weekly or daily time series, is problematic because of the large number of parameters. To obtain a more parsimonious model, the discrete Fourier transform (DFT) can be used to represent the model parameters. This article proves asymptotic results for the DFT coefficients, which allow identification of the statistically significant frequencies to be included in the PARMA model.     

Solution-processed germanium nanowire-positioned Schottky solar cells

Germanium nanowire (GeNW)-positioned Schottky solar cell was fabricated by a solution process. A GeNW-containing solution was spread out onto asymmetric metal electrodes to produce a rectifying current flow. Under one-sun illumination, the GeNW-positioned Schottky solar cell yields an open-circuit voltage of 177 mV and a short-circuit current of 19.2 nA. Schottky and ohmic contacts between a single GeNW and different metal electrodes were systematically investigated. This solution process may provide a route to the cost-effective nanostructure solar architecture.     

Aging effects of nanoscale ceria in ceria–platinum composite electrodes for direct alcohol electro-oxidation

Nanocrystalline Pt/CeO₂ composite electrodes were fabricated to study the electrochemical oxidation of methanol and ethanol. The performance of the electrodes was tested as the ceria solutions aged over time. It was observed that the performance oscillated with time, suggesting that the catalytic behavior towards alcohol oxidation was greatly dependent on the aging of the particles. These results point to a great dependence of the catalytic effect on the redox state of the ceria particles.     

Gas–liquid two-phase flow behavior in minichannels bounded with a permeable wall

In the present work, gas–liquid two-phase flow behavior in minichannels bounded with permeable walls under flow conditions relevant to fuel cell applications was investigated. Two-phase flow pressure drop was measured and the data showed significant deviation from the Lockhardt–Martinelli (LM) approach due to the unique liquid side-introduction in the present work. A new approach was then developed to improve the prediction of two-phase pressure drop by incorporating variations of the liquid velocity along the channels into the original LM approach, which can be potentially employed to predict pressure drops in Proton Exchange Membrane Fuel Cells (PEMFCs) where liquid water emerges into the gas channels from the gas diffusion layer. Liquid slugs were found to occur in the channel section bounded with a permeable wall at high liquid flow rates and low gas flow rates, as well as in the extended channel. An attempt was also made to develop a criterion for predicting the onset of slugging based on the instability analysis of stratified flow in minichannels. The theoretical prediction gave reasonable agreement with the experimental data on the onset of slugging flow in minichannels. However, an advanced approach is still needed in the future to predict the initiation of slugging since it is a critical issue in water management for PEM fuel cells.     

A Techno-economic assessment of the reduction of carbon dioxide emissions through the use of biomass co-combustion

Using sustainably-grown biomass as the sole fuel, or co-fired with coal, is an effective way of reducing the net CO₂ emissions from a combustion power plant. There may be a reduction in efficiency from the use of biomass, mainly as a result of its relatively high moisture content, and the system economics may also be adversely affected.The economic cost of reducing CO₂ emissions through the replacement of coal with biomass can be identified by analysing the system when fuelled solely by biomass, solely by coal and when a coal-biomass mixture is used.The technical feasibility of burning biomass or certain wastes with pulverised coal in utility boilers has been well established. Cofiring had also been found to have little effect on efficiency or flame stability, and pilot plant studies had shown that cofiring could reduce NO_x and SO_x emissions.Several technologies could be applied to the co-combustion of biomass or waste and coal. The assessment studies here examine the potential for co-combustion of (a) a 600 MWe pulverised fuel (PF) power plant, (i) cofiring coal with straw and sewage sludge and (ii) using straw derived fuel gas as return fuel; (b) a 350 MWe pressurised fluidised bed combustion (PFBC) system cofiring coal with sewage sludge; (c) 250 and 125 MWe circulating fluidised bed combustion (CFBC) plants cofiring coal with straw and sewage sludge; (d) 25 MWe CFBC systems cofiring low and high sulphur content coal with straw, wood and woody matter pressed from olive stones (WPOS); and (e) 12 MWe CFBC cofiring low and high sulphur content coal with straw.The technical, environmental and economic analysis of such technologies, using the ECLIPSE suite of process simulation software, is the subject of this study. System efficiencies for generating electricity are evaluated and compared for the different technologies and system scales. The capital costs of systems are estimated for coal-firing and also any additional costs introduced when biomass is used. The Break-even electricity selling price is calculated for each technology, taking into account the system scale and fuel used.Since net CO₂ emissions are reduced when biomass is used, the effect of the use of biomass on the electricity selling price can be found and the premium required for emissions reduction assessed. Consideration is also given to the level of subvention required, either as a Carbon dioxide Credit or as a Renewable Credit, to make the systems using biomass competitive with those fuelled only with coal.It would appear that a Renewable Credit (RC) is a more transparent and cost-effective mechanism to support the use of biomass in such power plants than a Carbon dioxide Credit (CC).     

Raman Spectroscopy of Nanocrystalline Ceria and Zirconia Thin Films

The results of Raman-scattering studies of nanocrystalline CeO₂ and ZrO₂:16% Y (YSZ) thin films are presented. The relationship between the lattice disorder and the form of the Raman spectra is discussed and correlated with the microstructure. It is shown that the Raman line shape results from phonon confinement and spatial correlation effects and yields information about the material nonstoichiometry level.     

Defect and Mixed Conductivity in Nanocrystalline Doped Cerium Oxide

The results obtained from a study on the microstructure and the electrical properties of Gd-doped CeO₂ thin films were reported. Dense, nanocrystalline films on sapphire substrates are prepared using a polymeric precursor spin coating technique. The electrical conductivity was studied as a function of temperature and oxygen activity and correlated with the grain size. For nanocrystalline Gd-doped CeO₂ thin films, the ionic conductivity increased with decreasing activation energy as the grain size decreased. A conductivity model was developed to analyze P _O2 behavior of the electrical conductivity. Using the conductivity model, the hopping energy of electron conduction and the enthalpy of oxygen vacancy formation were determined for different microstructures.