Mechanical countermeasures to subsynchronous torsional instability[in turbogenerators]

A mechanical countermeasure is presented that uses a fluid coupling to drive a flywheel at the end of a turbogenerator shaft, resulting in increased torsional damping for the shaft. The effect of varying the flywheel inertia and the fluid coupling's characteristics on the mechanical damping is presented. The application of such a countermeasure to subsynchronous resonance requires studies to determine the size of the coupling and flywheel that would be required to offset any negative electrical damping that may exist due to series compensation on the transmission system     

Dwell-Fatigue of Ni-Based Superalloys with Serrated and Planar Grain Boundary Morphologies: The Role of the γ′ Phase on Strain Accumulation and Cavitation

The effect of grain boundary (GB) morphology on the cavitation behavior in a Ni-based superalloy, RR1000, was studied during elevated temperature dwell-fatigue at 700 °C. Following a solution heat treatment, the material was control cooled at two different rates, resulting in high angle GB morphologies that were tailored as either serrated or planar. The resulting γ′ precipitate structures were characterized near GBs and within grains. Along serrated GBs coarsened and elongated γ′ precipitates formed and consequently created adjacent regions that were denuded of γ′ precipitates. Cyclic dwell-fatigue experiments were performed at low and high stress amplitudes to vary the amount of imparted strain on the specimens. A combination of electron backscatter diffraction and digital image correlation were used to resolve strain localization relative to the GBs, in which strain accumulation was found to precede cavity formation. Additionally, the regions denuded of the γ′ precipitates were observed to localize strain and to be initial sites of cavitation. These results present a quantitative strain analysis between two variants of an RR1000 alloy, which provides the micromechanical rationale to assess the increased proclivity for serrated GBs to form cavities.

     

Development and immunobiological evaluation of nanoparticles containing an immunodominant epitope of herpes simplex virus

Herpes simplex virus (HSV) 1 and 2 are viruses that infect individuals worldwide and for which there is no cure or vaccine available. The protective response against herpes is mostly mediated by CD8 T lymphocytes that respond to the immunodominant SSIEFARL epitope. However, there are some obstacles concerning the use of free SSIEFARL for vaccine or immunotherapy. The aim of this study was to evaluate the feasibility of nanoencapsulation of SSIEFARL and its immunostimulatory properties. Nano/SSIEFARL was produced by interfacial polymerization in methylmetacrylate, and the physico‐chemical properties, morphology and immunobiological parameters were evaluated. To evaluate the ex vivo capacity of Nano/SSIEFARL, we used splenocytes from HSV‐1‐infected mice to enhance the frequency of SSIEFARL‐specific CD8 T lymphocytes. The results indicate that Nano/SSIEFARL has a spherical shape, an average diameter of 352 ± 22 nm, the PDI was 0.361 ± 0.009 and is negatively charged (−26.30 ± 35). The stability at 4°C was 28 days. Also, Nano/SSIEFARL is not toxic for cells at low concentrations in vitro and it is taken up by JAWS II dendritic cells. No histopathological changes were observed in kidneys, liver and lymph nodes of animals treated with Nano/SSIEFARL. Nan/SSIEFARL increased the production of IL‐1β, TNF‐α and IL‐12 by the dendritic cells. Finally, Nano/SSIEFARL expanded the frequency of SSIEFARL‐specific CD8+T lymphocytes at the same rate as free SSIEFARL. In conclusion all data together indicate that SSIEFARL is suitable for nanoencapsulation, and the system produced presents some immunoadjuvant properties that can be used to improve the immune response against herpes.     

A two-step, two-signal model for the primary activation of precursor helper T cells

I present here a new model for the primary activation of precursor helper T cells. Observations demonstrate that the immune system learns not to respond to extrathymic, organ-specific self-antigens because of their early appearance in development. The immune system thus discriminates between peripheral self-antigens and foreign antigens and, when mature, usually makes an immune response against only the latter. Contemporary models for the activation and inactivation of T helper (Th) function do not account for such discrimination. The model proposed here is consistent with contemporary findings and incorporates a mechanism of peripheral self-nonself discrimination.     

Modulation of mitochondrial respiration by nitric oxide: investigation by single cell fluorescence microscopy

With the electro-driven import of rhodamine 123, we used single cell fluorescence microscopy to single out the contribution of nitric oxide (NO) in controlling mitochondrial membrane potential expressed by (stationary growing) rhabdomyosarcoma and neuroblastoma cells in culture. The experimental design and the computer-aided image analysis detected and quantitated variations of fluorescence signals specific to mitochondria. We observed that 1) the two cell lines display changes of fluorescence dependent on mitochondrial energization states; 2) mitochondrial fluorescence decreases after exposure of the cells to a NO releaser; 4) the different fluorescence intensity measured under stationary growing conditions, or after activation and inhibition of constitutive NO synthase, is consistent with a steady-state production of NO. Direct comparison of single cell fluorescence with bulk cytofluorimetry proved that the results obtained by the latter method may be misleading because of the intrinsic-to-measure lack of information about distribution of fluorescence within different cell compartments. The kinetic parameters describing the reactions between cytochrome oxidase, NO, and O2 may account for the puzzling (20-fold) increase of the KM for O2 reported for cells and tissues as compared to purified cytochrome c oxidase, allowing an estimate of in vivo NO flux.     

Composite reliability evaluation by sequential Monte Carlosimulation on parallel and distributed processing environments

This paper describes two parallel methodologies for composite reliability evaluation using sequential Monte Carlo simulation. The methodologies are based on coarse grain asynchronous implementations. In the first methodology, a complete simulation year is analyzed on a single processor and the many simulated years necessary for convergence are analyzed in parallel. In the second methodology, the adequacy analysis of the system operating states within the simulated years is performed in parallel and the convergence is checked on one processor at the end of each simulated year. The methodologies are implemented on a 10 nodes IBM RS/6000 SP scalable distributed memory parallel computer and on a network of 8 IBM RS/6000 43P workstations. The results obtained in tests with actual power system models showed high speedup and efficiency on both parallel platforms