On the interrelation of rubber elastic stress-strain curves under different types of strain

With specially shaped samples it is possible to study the stress-strain relation σ(γ) in simple shear up to large shear deformation γ. Measurements of σ(γ) on synthetic polyisoprene, IR 305, differently crosslinked with dicumylperoxide, are reported and compared with those for uniaxial extension on the same materials. Using the simple deformation geometry including shearbands proposed in the meander model (1), both stress-strain relations can be converted into each other. These results favor the applied superstructural model and moreover show that the deformation behavior of rubbers is governed by one material law, σ(γ).     

A Complete and Highly Effective Mothproofing Agent Comprising a Pyrethroid and a Hexahydropyrimidine

Pyrethroids, considered as a general class of compounds, have been shown to provide effective protection from the larvae of the keratin-digesting insects Tineola bisselliella H., Tinea pellionella Linn., Hofmannophila pseudo-spretella Station and Attagenus piceus Oliv. The position regarding the susceptibility of the furniture carpet beetle to pyrethroids is less clear, however. It has been reported that both deltamethrin and permethrin are effective against Anthrenus flavipes Le Conte, whilst permethrin is also reported elsewhere to be effective against the same species. Results obtained in our laboratory, however, have indicated that pyrethroids may offer inadequate protection against Anthrenus vorax Waterh. [1, 2]. This latter species is identical to Anthrenus flavipes var. seminiveus Casey, a colour variety of Anthrenus flavipes Le Conte. The 1,3-disubstituted5-phenylcarbamoyl-2,4,6-trioxo- and 4,6-dioxo-2-thione-hexahydropyrimidine derivatives described in this paper exhibit a surprisingly high and selective toxicity to the Anthrenus species. Thus, a combination of an appropriate hexahydropyrimidine with a suitable pyrethroid, e.g. permethrin, provides complete control of a wide range of commonly encountered textile insect pests. The influence of substituents on the mothproofing activity is discussed.     

A comparison of symptoms used by mothers and nurses to identify an infant with colic

In this survey research a comparison was made between symptoms used by mothers and nurses which led them to think the baby might be "colicky." Two questionnaires, one for mothers and one for nurses, were used to collect the data. The mothers most frequently selected passes gas rectally, clenches fists, draws-up legs, cries late afternoon and evening, holds body straight, and wants to be held. The nurses selected mother states baby is inconsolable, cries more than 4 hours in 24, draws up legs and wants to feed but won't. Parents believed the colic to be related to a variety of factors; these included baby's eating behaviour, maternal anxiety, baby's and mother's diets, and baby's stress. Ten parents reported pain and screaming as symptoms of colic.     

Video-assisted lateral intertransverse process arthrodesis. Validation of a new minimally invasive lumbar spinal fusion technique in the rabbit and nonhuman primate (rhesus) models

STUDY DESIGN: Cadaveric anatomic and in vivo survival animal studies were performed to develop a new arthrodesis technique for the lumbar spine. OBJECTIVES: To examine the feasibility, efficacy, and safety of a minimally invasive lumbar intertransverse process arthrodesis technique using an osteoinductive growth factor (rhBMP-2) delivered in a collagen sponge carrier. The technique was first developed using a rabbit model and modified for the nonhuman primate (rhesus monkey), a larger animal with the most similar bone biology to humans. SUMMARY OF BACKGROUND DATA: The morbidity of conventional posterolateral lumbar intertransverse process arthrodesis includes graft donor site morbidity; paraspinal muscle devascularization, denervation, and scarring and nonunion in up to 36% of patients. Minimally invasive anterior lumbar interbody arthrodesis techniques have been developed, but these often require a metal implant and carry risks to major vessels and development of retrograde ejaculation. A minimally invasive technique for posterolateral intertransverse process arthrodesis has not been described previously. METHODS: In Part 1, we examined seven New Zealand white rabbits and five rhesus monkeys at necropsy and during nonsurvival surgeries to determine the best access routes and to develop special instruments for video-assisted lateral intertransverse process arthrodesis. In Part 2, 38 New Zealand white rabbits underwent L4-L5 intertransverse process arthrodesis: the "OPEN" group (n = 16) underwent a standard open muscle-splitting approach using rhBMP-2 (bone morphogenetic protein) and collagen as a bone graft substitute; the "video-assisted control" group (n = 6) underwent video-assisted lateral intertransverse process arthrodesis with the collagen implant only (no growth factor); and the "video-assisted-BMP" group (n = 16) underwent video-assisted lateral intertransverse process arthrodesis with rhBMP-2 and collagen as the graft material. In Part 3, rhesus monkeys (n = 4) underwent video-assisted lateral intertransverse process arthrodesis using rhBMP-2 and collagen after laminectomy of L4-L5. RESULTS: In Part 1, we identified expedient, minimally invasive routes to the intertransverse process interval appropriate for each species: an intermuscular approach for the rabbit and a lateral, extramuscular approach for the rhesus monkey. In Part 2, all rabbits in the OPEN and video-assisted-BMP groups achieved solid intertransverse process lumbar fusions when assessed at 10 weeks. There were no neurologic impairments nor any difference between the two groups in the frequency of postoperative infection or other complications. None of the animals in the video-assisted control group showed evidence of fusion. In Part 3, exposure, decortication and grafting with rh-BMP-2 and collagen was accomplished successfully in all four monkeys through the video-assisted minimally invasive approach without complications. CONCLUSION: Video-assisted lateral intertransverse process arthrodesis is a feasible, effective, and safe method of lumbar spinal fusion in the rabbit and rhesus monkey. Use of this arthrodesis procedure will minimize the morbidity of paraspinal muscle denervation and devascularization seen with open intertransverse process fusion techniques, and the use of an osteoinductive growth factor will eliminate the problem of graft donor site morbidity and possibly increase the chances for successful fusion.     

Performance Analysis of Periodic Control for l1 and l∞ Disturbance Rejection

This paper presents a performance analysis of discrete time periodically time varying controllers for the rejection of l_p specific and uniform disturbances. Earlier results on l₂ performance are extended to l₁ and l_∞ performance to present a unified treatment of l_p performance for all p ε [1, ∞]. For a given linear time varying periodic controller, a linear time invariant controller is constructed and necessary and sufficient conditions are presented under which the linear time invariant controller gives strictly better l_p disturbance rejection performance than the time varying periodic controller.     

Upper-bound modelization of an ironed three-layered polymer-coated steel strip

Global beverage can and food container consumption is very high, with billions of cans produced annually worldwide. There are several steps in can manufacturing, but ironing is the most crucial. In a previous work (Sellés et al., J Mater Process Technol 202:7–14, 2008), a series of ironing experiments were reported using a new material and an ironing simulator. This material was a three-layered polymer-coated steel, and it was seen that under some process conditions, it survived the ironing process with no damage in any of the three layers. The critical die angle was determined as well as specimen quality surface tests. In this paper, an associated theoretical ironing model is described, using the upper-bound theorem and considering the cases of successful ironing or shaving. It is possible to give insight into how to design a material that irons well. For example, the optimal layer thicknesses are also found.     

Multisensor approach to determine changes of wetland characteristics in semiarid environments (central Spain)

Saline wetlands in the semiarid environment of Central Spain are fragile and highly dynamic ecosystems that are affected by degradation processes as a result of anthropological influences. An increase in agricultural production has led to the development of large-scale irrigation schemes with overexploitation of groundwater, and with consequent effects on the complex hydrology and associated land use. In this work, data from field, hyperspectral airborne, and multispectral satellite sensors are used in order to determine changes of wetland characteristics over time. The spectra of surface components (soil, vegetation, and salt crusts) were selected from the hyperspectral data and identified as endmembers using a site-specific spectral library. The spectral information contained in these endmembers was extrapolated to a temporal series of broadband multispectral imagery on which spectral unmixing analysis was performed in order to detect changes in the wetland over time. Results showed that the selected wetland components have undergone important changes in both their total area as well as their spatial distribution. These changes are mainly associated with the anthropogenic impact; however, natural influences due to seasonal fluctuations may coincide with the overall changes, although this in general is difficult to determine. Water regulation and agricultural practices directly influence the salinity of the soils and therefore the nature of the hygrophytic vegetation.     

The PANOPTIC Camera: A Plenoptic Sensor with Real-Time Omnidirectional Capability

A new biologically-inspired vision sensor made of one hundred “eyes” is presented, which is suitable for real-time acquisition and processing of 3-D image sequences. This device, named the Panoptic camera, consists of a layered arrangement of approximately 100 classical CMOS imagers, distributed over a hemisphere of 13 cm in diameter. The Panoptic camera is a polydioptric system where all imagers have their own vision of the world, each with a distinct focal point, which is a specific feature of the Panoptic system. This enables 3-D information recording such as omnidirectional stereoscopy or depth estimation, applying specific signal processing. The algorithms dictating the image reconstruction of an omnidirectional observer located at any point inside the hemisphere are presented. A hardware architecture which has the capability of handling these algorithms, and the flexibility to support additional image processing in real time, has been developed as a two-layer system based on FPGAs. The detail of the hardware architecture, its internal blocks, the mapping of the algorithms onto the latter elements, and the device calibration procedure are presented, along with imaging results.     

Growth and dielectric properties of Ta_2O_5 single crystals grown by laser heated pedestal growth technique

Ta2O5 single crystals have been grown by the laser heated pedestal growth (LHPG) technique up to several centimeters length with diameter of 1.1 mm. The crystal, characterized by X-ray diffraction, dielectric measurement, and thermal expansion analysis, has Htri-Ta2O5 symmetry. Dielectric permittivity, loss tangent along [001] and [110] direction were investigated over the temperature range from -80 ℃ to 100 ℃. Large dielectric anisotropy in Ta2O5 single crystal was observed. At room temperature, the dielectric permittivities (1 MHz) along [001] and [110] are 33.2 and 231.9, respectively. The reason of dielectric enhancement in Ta2O5 crystal grown by LHPG was also discussed.     

SiC devices for advanced power and high-temperature applications

Silicon carbide (SiC) process technology has made rapid progress, resulting in the realization of very promising electronic devices and sensors, enabling advanced solutions in power industry and mobile systems. In particular, for electronics working under harsh environmental conditions, SiC devices reach unprecedented performance. Transfer to production has already started for some applications