The role of trade literature in the communication system

Bibliometric methods in general undervalue technological research. This study examines the relation in literature between technological/industrial journals and scientific journals in the case of the plastics industry and polymer science. Trade-journals cannot be used in a straightforward bibliometric manner, but can be an aid in mapping the different groups and reveal the hidden communication between technological and scientific communities.     

Seven-pinhole tomography of the thyroid

In this paper we introduce a new application of the sevenpinhole (7P) collimator: tomographic imaging of the thyroid. The collimator design has been reoptimized for this particular application by diminishing the distance from the collimator plate to the crystal and by choosing a smaller pinhole diameter. To reconstruct thyroid images from the two-dimensional projection data we use a method which we developed for 7P tomographic imaging of the heart [1]. Phantom experiments and patient studies demonstrate that this new device is capable of producing tomographic images of good quality and high resolution. Therefore, it seems to offer a promising alternative to conventional planar imaging of the thyroid (using a single-pinhole collimator).     

Softening and melting mechanisms of polyamides interfering with sliding stability under adhesive conditions

The thermal stability of polymers is a main issue when used as friction elements under dry sliding. Cast polyamide grades processed with either natrium or magnesium catalysors are slid on a small-scale and a large-scale test configuration to reveal the effect of softening or degradation on the sliding stability and to investigate possibilities for extrapolation of friction and wear rates between both testing scales. The combination of softening and afterwards transition into the glassy state is detrimental for the sliding stability of natrium catalysed polyamides, characterised by heavy noise during sliding. A transfer film formed under continuous softening also provides high friction. Melting during initial sliding is necessary for stabilisation in both friction and wear, and eventual softening of a molten film near the end of the test then not deteriorates the sliding stability. Softening of magnesium catalysed polyamides is favourable for the formation of a coherent transfer film resulting in more stable sliding than natrium catalysed polyamides. The differences in softening mechanisms of both polyamide grades is correlated to structural changes investigated by thermal analysis and Raman spectroscopy: the γ crystalline structure prevails in magnesium catalysed samples and the α crystalline structure is predominant in natrium catalysed samples. For internal oil lubricated polyamides, a time dependent degradation of the polyamide bulk deteriorates the supply of internal oil lubricant to the sliding interface, resulting in high friction and wear under overload conditions. As the degradation mechanisms during sliding are strongly correlated to the test set-up, extrapolation is only possible for friction in a limited application range, while wear rates cannot be extrapolated.     

Relationship of peroxide value and thiobarbituric acid value to development of undesirable flavor characteristics in fats

The peroxide value and thiobarbituric acid value were compared with the flavor score for a series of different types of fats, with and without added monoglyceride and with and without different stabilizers. The data indicated that the flavor score cannot be estimated for any given fat from either the peroxide value or the thiobarbituric acid value. Either can be used to follow the development of off flavors in a given product or formulation but the relative level may vary from product to product. Presented at the AOCS Meeting in Minneapolis, 1963.     

Experimental research and prediction of the effect of chemical and biogenic sulfuric acid on different types of commercially produced concrete sewer pipes

New equipment and procedures for chemical and microbiological tests, simulating biogenic sulfuric acid corrosion in sewerage systems, are presented. Subsequent steps of immersion and drying, combined with mechanical abrasion, were applied to simulate events occurring in sewer systems. Both chemical and microbiological tests showed that the aggregate type had the largest effect on degradation. Concrete with limestone aggregates showed a smaller degradation depth than did the concrete with inert aggregates. The limestone aggregates locally created a buffering environment, protecting the cement paste. This was confirmed by microscopic analysis of the eroded surfaces. The production method of concrete pipes influenced durability through its effect on W/C ratio and water absorption values. In the microbiological tests, HSR Portland cement concrete performed slightly better than did the slag cement concrete. A possible explanation can be a more rapid colonisation by microorganisms of the surface of slag cement samples. A new method for degradation prediction was suggested based on the parameters alkalinity and water absorption (as a measure for concrete porosity).     

The use of direct osmosis tests as complementary experiments to determine the water and salt permeabilities of reinforced cellulose acetate membranes

In this article the use of the direct osmosis test as a complementary experiment to the reverse osmosis test is described. The membranes investigated are cellulose acetate membranes reinforced with mineral fillers. In both tests the same influence of the type of fillers on the water permeability coefficients is found. The salt permeability coefficients indicate the presence of pressure sensitive defects in the reinforced membranes. The direct osmosis test is found to be a suitable test to confirm and predict the membrane properties under reverse osmosis conditions.     

Optimization of design and operating policy of an industrial two-bed co-shift reactor

The optimal operating policy for a two-bed adiabatic CO-converter is computed using the Discrete Maximum Principle. The problem is then extended to determine also the optimal design of the system. A sensitivity analysis of the optimal solutions is presented, showing the influence of the principal process parameters. Economical, chemical and physical data have been obtained from an existing CO-converter in a standard 1000 short Tons/day NH₃ plant.     

Modelling formation and growth of H2SO4-H2O aerosols: Uncertainty analysis and experimental evaluation

An aerosol dynamics model, AERO2, is presented, which describes the formation of H₂SO₄-H₂O aerosol in a smog chamber. The model is used to analyse how the uncertainties on four input parameters are propagated through an aerosol dynamics model. The input parameters are: the rate of the reaction between SO₂ and OH (k₁), the ratio between the nucleation rate used in AERO2 and that derived from classical nucleation theory (t_n), the H₂SO₄ mass accommodation coefficient () and a measure of the turbulence intensity in the reactor (k_e). Uncertainties for these parameters are taken from the literature. One of the results of the analysis is that AERO2 and aerosol dynamics models in general can only predict upper bounds for the total number (N_tot) and total volume (V_tot) concentrations of the particles. The uncertainties on N_tot and V_tot are mainly due to the uncertainties on k₁, and t_n. An uncertainty factor of 20–100 still remains when the uncertainty on k₁, is reduced to ±5%. Aerosol measurements from three smog chamber experiments have therefore been used, in an attempt to reduce the uncertainty on k₁ and t_n. Values for k₁ are obtained in the reduced range 7.8 × 10⁻¹³ to 1.0 × 10⁻¹² cm³ s⁻¹, which is within the range found in the literature. For t_n, values in the range 10⁴–10⁷ are obtained, which is close to the upper bound of the range in literature. These values for t_n are in marked contrast with a recent set of experiments on nucleation in H₂SO₄-H₂O mixtures, which suggests a value for t_n of at most 10⁻⁵.     

Inhomogeneous Density in Die Compaction: Experiments and Finite-Element Calculations

X-ray density measurements and two-color powder displacement observations were used to determine the reliability of the cylindrical test cell as a source of data for a plasticity model of granular materials. Calculations with such a model agree well with the experimental density distribution, for the cylindrical test cell itself and for a cylindrical die, compacted from one side by means of a profiled plunger .