Effect of transfer on droplet size in liquid-liquid dispersions

Mean droplet diameter of the dispersed phase in pulsed plate extraction columns was measured for binary and ternary systems. A change in the droplet size in the presence of solute, dependent on such factors as the direction of mass transfer, droplet size in the binary system, radio of diffusion coefficients, viscosity of the continuous phase, interfacial tension and driving force for extraction was observed. Two new empirical correlations of mean droplet sizes in mass transfer conditions are proposed. These correlations have been successfully applied to other extraction columns.     

Grain size dependent mechanical properties of nanocrystalline diamond films grown by hot-filament CVD

Nanocrystalline diamond (NCD) films with a thickness of ~ 6 µm and average grain sizes ranging from 60 to 9 nm were deposited on silicon wafers using a hot-filament chemical vapor deposition (HFCVD) process. These samples were then characterized in order to identify correlations between grain size, chemical composition and mechanical properties. The characterization reveals that our films are phase pure and exhibit a relatively smooth surface morphology. The levels of sp²-bonded carbon and hydrogen impurities are low, showing a systematic variation with the grain size. The hydrogen content increases with decreasing grain size, whereas the sp² carbon content decreases with decreasing grain size. The material is weaker than single crystalline diamond, since both stiffness and hardness decrease with the reduction in crystal size. These trends suggest gradual changes in the nature of the grain boundaries, from graphitic in case of 60 nm grain size material to hydrogen terminated sp³ carbon in 9 nm grain size material. The films exhibit low levels of internal stress and free-standing structures with a length of several centimeters could be fabricated without noticeable bending     

Aquatic suction feeding dynamics: insights from computational modelling

Aquatic suction feeding in vertebrates involves extremely unsteady flow, externally as well as internally of the expanding mouth cavity. Consequently, studying the hydrodynamics involved in this process is a challenging research area, where experimental studies and mathematical models gradually aid our understanding of how suction feeding works mechanically. Especially for flow patterns inside the mouth cavity, our current knowledge is almost entirely based on modelling studies. In the present paper, we critically discuss some of the assumptions and limitations of previous analytical models of suction feeding using computational fluid dynamics.     

Preimplantation genetic diagnosis of Marfan syndrome with the use of fluorescent polymerase chain reaction and the Automated Laser Fluorescence DNA Sequencer

OBJECTIVE: To develop and apply clinical preimplantation genetic diagnosis (PGD) for Marfan syndrome. DESIGN: Case report. SETTING: Centers for medical genetics and reproductive medicine in university hospitals. PATIENT(S): One couple in which the husband was affected with Marfan syndrome. INTERVENTION(S): The couple underwent three intracytoplasmic sperm injection cycles. MAIN OUTCOME MEASURE(S): The correct diagnosis was obtained for embryos in three PGD cycles. RESULT(S): Although all the PGD cycles were followed by ET, no pregnancy ensued. CONCLUSION(S): This assay can provide a reliable and accurate preimplantation diagnosis of Marfan syndrome.     

A molecular mechanism for electrical tuning of cochlear hair cells

Cochlear frequency selectivity in lower vertebrates arises in part from electrical tuning intrinsic to the sensory hair cells. The resonant frequency is determined largely by the gating kinetics of calcium-activated potassium (BK) channels encoded by the slo gene. Alternative splicing of slo from chick cochlea generated kinetically distinct BK channels. Combination with accessory beta subunits slowed the gating kinetics of alpha splice variants but preserved relative differences between them. In situ hybridization showed that the beta subunit is preferentially expressed by low-frequency (apical) hair cells in the avian cochlea. Interaction of beta with alpha splice variants could provide the kinetic range needed for electrical tuning of cochlear hair cells.     

Impact of high saline wastewaters on anaerobic granular sludge functionalities.

Three UASB reactors were operated at different salinity levels in order to assess the effects on the granular sludge properties. High levels of activity inhibition were observed at sodium concentrations over 7 g Na(+)/L, which resulted in low applicable organic loading rates and VFA accumulation in reactor effluents. However, either sludge adaptation or selection for saline resistant microorganisms occurred, which could be concluded from the observed increase in the 50% activity inhibitory concentrations of sodium during continuous flow experiments. Changes in Na(+) susceptibility in time are likely to be expected when treating saline wastewaters. The latter was evidenced by the high sodium tolerance of granular methanogenic sludge coming from a full-scale industrial reactor treating such wastewater. High salinity conditions resulted in a reduced granule strength, predicting process instabilities during long term reactor operation. Batch tests showed that high sodium concentrations seemed to displace the calcium from the granular sludge, a factor known to affect anaerobic granules formation.     

Surface grain structure evolution in hot rolling of 6061 aluminum alloy

During hot deformation of Al–Mg–Si alloys, a non-uniform microstructure is developed due to differences in localized strain. Physical simulations were performed to examine the effects of processing parameters such as deformation temperature, total reduction, rolling schedule and alloying additions on the grain structure evolution. Overall, the kinetics of recrystallization followed the traditional trends predicted by JMAK kinetics. Electron backscatter diffraction (EBSD) was used to quantify the difference in recrystallization kinetics at the sample surface and mid-thickness. The results showed that the surface showed elevated kinetics when compared to the sample mid-thickness.     

Analytical techniques with a cyclotron on polymers

Nuclear analytical techniques (PIXE, RBS and ERDA) have been applied to investigate diffusion processes in polymer light-emitting diodes (PLEDs), employing a 30 MeV AVF cyclotron. The techniques prove to be useful in identifying the origin of the diffusion process and the nature of molecules transported from the hole injecting ITO electrode into the polymer layer.     

A sixth-order continuous-time bandpass sigma-delta modulator fordigital radio IF

This paper presents a sixth-order continuous-time bandpass sigma-delta modulator (SDM) for analog-to-digital conversion of intermediate-frequency signals. An important aspect in the design of this SDM is the stability analysis using the describing function method. The key to the analysis is the extension of the linear gain model for the sampled quantizer with a phase uncertainty. The single-loop, one-bit SDM is tuned at 10.7 MHz, is sampled at 40 MHz, and achieves 67-dB signal-to-(noise+distortion) ratio in 200 kHz and 80 dB in 9 kHz. The third order intermodulation is at -82 dBc for a -13-dBFS input level. The 0.5-μm CMOS chip occupies 0.9×0.4 mm² and consumes 60 mW at 3.3 V (digital) and 5.0 V (analog). The sample frequency is variable and can be set from 30 to 80 MHz