Mechanical Behavior of Several Hybrid Ceramic-Matrix-Composite Laminates

Several different hybrid laminated composites comprised of alternating layers of dense ceramic sheets (either SiC or Si₃N₄) and fiber-reinforced ceramic-matrix-composite (CMC) layers (Nicalon fibers with either glass or glass-ceramic matrices) have been fabricated and characterized. The effects of the reinforcement architecture (unidirectional vs cross-ply) and the relative volume fractions of the phases on the tensile and flexural properties have been examined. Comparisons have been made with the properties of the constituent layers. Rudimentary models have been developed to describe the onset of cracking and for the minimum volume fraction of CMC required to develop multiple cracks and thus obtain a high failure strain.     

High-Strength Zirconia Fibers

Fine-grained polycrystalline zirconia fibers have been formed from an acetate precursor. The fibers contained a Y₂O₃ additive, which inhibited grain growth (grain size ≤0.5 μm) and allowed the tetragonal phase to be retained at room temperature. Fibers with diameters in the range 2 to 5 μm had strengths in the range 1.5 to 2.6 GPa.     

频率响应法研究噻吩在CeY分子筛上的吸附行为

以NaY、液相Ce离子交换改性的Y型分子筛(L-CeY)为研究对象,运用N2吸附、XRD、NH3-TPD和Py-FTIR等实验方法表征两种Y型分子筛的物化性能。采用频率响应技术(FR)和智能重量分析仪(IGA)研究噻吩在两种分子筛上的吸附行为,并考察噻吩在稀土离子改性Y型分子筛上的不同吸附作用模式。结果表明,频率响应技术能够有效识别分子筛孔道内发生的不同传质过程。噻吩在NaY分子筛上的吸附行为较为简单,存在孔道吸附和π电子相互作用两种吸附过程;而在L-CeY分子筛上吸附行为较为复杂,同时存在孔道吸附和"S-M"吸附等多种吸附过程,另外,在高温条件下,还存在复杂的催化反应过程。     

Model selection for covariance structures analysis in nursing research

Covariance structures analysis is often used in nursing research to appraise statistical models reflecting complex human health processes. The model selection approach in covariance structures analysis is designed to select the "best" model from a specified set of theoretically defensible, competing alternatives, all of which are viewed as approximations. Model selection criteria explicitly incorporate both model misfit in the population and sampling error to evaluate the set of models. The result is that interpretability of model parameters and goodness-of-fit are enhanced simultaneously. Relative merits of the model selection approach are identified in light of technical concerns, parsimony, and use of scientific theory in nursing.     

Infrared temperature measurement in the ear canal with the DIATEK 9000 Instatemp and the DIATEK 9000 Thermoguide. Comparison with methods of temperature measurement in other body parts

Temperature of the tympanic membrane is recommended as a "gold standard" of core-temperature recording. However, use of temperature probes in the auditory canal may lead to damage of tympanic membrane. Temperature measurement in the auditory canal with infrared thermometry does not pose this risk. Furthermore it is easy to perform and not very time-consuming. For this reason infrared thermometry of the auditory canal is becoming increasingly popular in clinical practice. We evaluated two infrared thermometers-the Diatek 9000 Thermoguide and the Diatek 9000 Instatemp-regarding factors influencing agreement with conventional tympanic temperature measurement and other core-temperature recording sites. In addition, we systematically evaluated user dependent factors that influence the agreement with the tympanic temperature. MATERIALS AND METHODS: In 20 volunteers we evaluated the influence of three factors: duration of the devices in the auditory canal before taking temperature (0 or 5 s), interval between two following recordings (30, 60, 90, 120, 180 s) and positioning of the grip relative to the auditory-canal axis (0, 60, 180 and 270 degrees). Agreement with tympanic contact probes (Mon-a-therm tympanic) in the contralateral ear was investigated in 100 postoperative patients. Comparative readings with rectal (YSI series 400) and esophageal (Mon-a-therm esophageal stethoscope with temperature sensor) probes were done in 100 patients in the ICU. The method of Bland and Altman was taken for comparison. RESULTS: Shortening of the interval between two consecutive readings led to increasing differences between the two measurements with the second reading decreasing. A similar effect was seen when positioning the infrared thermometers in the auditory canal before taking temperatures: after 5 s the recorded temperatures were significantly lower than temperature recordings taken immediately. Rotation of the devices out of the telephone handle position led to increasing lack of agreement between infrared thermometry and contact probes. Mean differences between infrared thermometry (Instatemp and Thermoguide, CAL-Mode) and tympanic probes were -0.41 +/- 0.67 degree C (2 SD) and -0.43 +/- 0.70 degree C, respectively. Mean differences between the Thermoquide (Rectal-Mode) and rectal probe were -0.19 +/- 0.72 degree C, and between the Thermoguide (Core Mode) and esophageal probe -0.13 +/- 0.74 degree C. DISCUSSION: Although easy to use, infrared thermometry requires careful handling. To obtain optimal recordings, the time between two consecutive readings should not be less than two min. Recordings should be taken immediately after positioning the devices in the auditory canal. Best results are obtained in the 60 degrees position with the grip of the devices following the ramus mandibulae (telephone handle position). The lower readings of infrared thermometry compared with tympanic contact probes indicate that the readings obtained represent the temperature of the auditory canal rather than of the tympanic membrane itself. To compensate for underestimation of core temperature by infrared thermometry, the results obtained are corrected and transferred into core-equivalent temperatures. This data correction reduces mean differences between infrared recordings and traditional core-temperature monitoring, but leaves limits of agreement between the two methods uninfluenced.     

Subjective time experience in an intergenerational sample

The roles chronological age and gender play in subjective time experience were explored in a sample of 294 adult men and women. Subjective time experience (STE: the difference between subjective age and chronological age) was found to vary widely among individuals, with some being "accurate" (SA = CA), and others either "retarded" (SA less than CA) or "advanced" (SA greater than CA). Males were more retarded in STE than females at every point in the lifespan, and patterns of age differences in adulthood differed for the two sexes as well. The results suggest that chronological age may play a key role in transitions in STE, and that chronological age is more significant in the STE of women than in the STE of men.     

Hot-pressing behaviour of silicon carbide powders with additions of aluminium oxide

The hot-pressing behaviour of different silicon carbide powders (average particle sizes ranging from ～ 0.5 to 9 μm) with aluminium oxide additions ranging from 0.01 to 0.15 volume fractions was investigated. Using powders with an average particle size < 3 μm, densities ≥ 99% theoretical could be achieved at 1950° C (1 h) with 28 MN m^?2 for volume fractions of AI₂O₃ \(\bar > \) 0.02. A liquid phase forms at high temperatures which dissolves the silicon carbide particles to promote densification by a solution-reprecipitation mechanism.     

Vortex matter in superconductor/ferromagnet hybrids

Vortex pinning in type-II superconducting films can be effectively controlled by combining these films with different ferromagnetic nanostructures. In this article an overview is presented of different types of ferromagnetic pinning centers. The investigated hybrid structures consist of Pb films that are deposited on top of arrays of ferromagnetic dots with in-plane magnetization (IMP) or out-of-plane magnetization (OPM), ferromagnetic films with IPM or OPM that contain arrays of submicron holes (antidots), or continuous films with OPM and a magnetic domain structure. Interesting effects such as field-polarity dependent vortex pinning and the dependence of the pinning strength on the domain structure of the ferromagnet are observed. Our experiments demonstrate that vortex pinning in superconductors is strongly influenced by the magnetic properties of the different ferromagnetic pinning centers.