Influence of the glycosidic linkage on the solution conformation of glucans

In order to gain a better understanding of the influence of β-glycosidic linkages on the solution conformation of glucans, a comparison was made between the carboxymethyl derivatives of cellulose (CMC, 100% 1,4-), barley glucan (CMGG, 30 : 70 1,3 : 1,4-) and curdlan (CMCd, 100% 1,3-glycosidic), each with an average degree of substitution of DS = 1.0–1.5 and molar masses of 144 000–720 000 g mol^–1. For this purpose curdlan and barley glucan were chemically modified, whereas carboxymethylcellulose was available as a commercial sample. Via congo red analysis it was proved for the microbial β-1,3-glucans curdlan (unsubstituted) and scleroglucan (one β-1,6-linked glucose side group on every third monomer unit) that substituents in glucan derivatives weaken an existing helical structure but that reduction of the molar mass with ultrasound has no influence on the helices. The molecular parameters M_w, M_n, R_G, L_P and [η] were determined by means of SEC/MALLS measurements and viscometry and the chain mobility was quantified using the ¹³C NMR relaxation times, T₁, of the different polymers. From this it was possible to derive [η]-M_w relationships. For all samples, the exponent ν of the R_G-M_W relationship lay in the range 0.54–0.59, from which it is possible to deduce a coiled solution structure. However, β-1,3-glucans occupy 25% less volume than β-1,4-glucans and exhibit less chain mobility. Hence β-1,4-glucans should be considerably more viscous than β-1,3-glucans, as was indeed demonstrated by rheological flow curves of 6% solutions of the carboxymethylglucan derivatives. The zero-shear viscosity, η₀, decreases by 3 decades in the order of CMC > CMGG > CMCd.     

The composition of the extractives from unaffected and heartrot affected heartwood of Acacia mangium Willd

A. mangium has been studied by a successive extraction of the wood with a series of solvents with increasing polarity, followed by GC, GC/MS and DC studies of the fractions obtained. The study of the extractives of sound and affected wood with respect to yield and composition cannot explain the influence of the heartrot fungi on wood components in detail. Differences mainly have been found in the more polar fractions (acetone/water and ethanol/water, respectively). The content of lipophilic extractive constituents is with about 0.6–0.7% rather low and does not differ between sound and affected heartwood. The composition of the lipophilic extractives is not very different either.

---

A. mangium wurde untersucht, wobei sukzessiv mit einer Reihe von L?sungsmitteln ansteigender Polarit?t extrahiert und die einzelnen Fraktionen mit Hilfe von GC, GC/MS und DC untersucht wurden. Die Untersuchung der Extrakte aus gesundem und befallenem Holz zeigte, da? Extraktausbeuten und Zusammensetzung den Einflu? des Pilzbefalls auf die Holzkomponenten nicht detailliert beschreiben K?nnen. Unterschied in Ausbeute und Zusammensetzung der Extrakte wurden haupts?chlich in den polaren Extraktfraktionen (Aceton/Wasser- und Ethanol/Wasser-Extrakte) gefunden. Der Gehalt an lipophilen Extraktbestandteilen ist mit etwa 0.6–0.7% eher niedrig, gesundes und befallenes Holz unterscheiden sich praktisch nicht. Auch die Zusammensetzung der lipophilen Extrakte ist kaum verschieden zwischen gesundem und befallenem Holz.

     

Impacts of large amounts of wind power on design and operation of power systems,results of IEA collaboration

There are dozens of studies made and ongoing related to wind integration. However, the results are not easy to compare. IEA WIND R&D Task 25 on ‘Design and Operation of Power Systems with Large Amounts of Wind Power’ collects and shares information on wind generation impacts on power systems, with analyses and guidelines on methodologies. In the state‐of‐the‐art report (October, 2007), and the final report of the 3 years period (July, 2009) the most relevant wind power grid integration studies have been analysed especially regarding methodologies and input data. Several issues that impact on the amount of wind power that can be integrated have been identified. Large balancing areas and aggregation benefits of wide areas help in reducing the variability and forecast errors of wind power as well as help in pooling more cost effective balancing resources. System operation and functioning electricity markets at less than day‐ahead time scales help reduce forecast errors of wind power. Transmission is the key to aggregation benefits, electricity markets and larger balancing areas. Best practices in wind integration studies are described. There is also benefit when adding wind power to power systems: it reduces the total operating costs and emissions as wind replaces fossil fuels and this should be highlighted more in future studies. Copyright © 2010 John Wiley & Sons, Ltd.     

The GHG balance of biofuels taking into account land use change

The contribution of biofuels to the saving of greenhouse gas (GHG) emissions has recently been questioned because of emissions resulting from land use change (LUC) for bioenergy feedstock production. We investigate how the inclusion of the carbon effect of LUC into the carbon accounting framework, as scheduled by the European Commission, impacts on land use choices for an expanding biofuel feedstock production. We first illustrate the change in the carbon balances of various biofuels, using methodology and data from the IPCC Guidelines for National Greenhouse Gas Inventories. It becomes apparent that the conversion of natural land, apart from grassy savannahs, impedes meeting the EU's 35% minimum emissions reduction target for biofuels. We show that the current accounting method mainly promotes biofuel feedstock production on former cropland, thus increasing the competition between food and fuel production on the currently available cropland area. We further discuss whether it is profitable to use degraded land for commercial bioenergy production as requested by the European Commission to avoid undesirable LUC and conclude that the current regulation provides little incentive to use such land. The exclusive consideration of LUC for bioenergy production minimizes direct LUC at the expense of increasing indirect LUC.     

Commercial soybean lecithins: a source of hidden allergens?

 Soybeans are known to be allergenic for adults as well as for infants. Processed products derived from soybeans are used in a wide spectrum of foods, drugs and other industrial products. In particular, soybean lecithins are used as stabilizers and emulsifiers and may not be suspected as possible source of allergens. To test this hypothesis, six commercial soy lecithins were investigated for residual allergenicity and compared with extracts from raw and heat-treated soybeans. They were characterized, the protein content was determined by enzyme-linked immunosorbent assay (ELISA) and allergens were analyzed with specific IgE from patients' sera using the enzyme allergosorbent test (EAST), EAST inhibition and protein blotting followed by immunodetection. For further characterization a polyclonal antiserum directed against soybean extract and a monoclonal antibody (mAb 025) directed against the acidic subunit of the soybean storage protein glycinin were used. The EAST studies revealed that three of six sera from patients with allergy to soybeans contained IgE to four soy lecithins (Topcithin 50, Topcithin 300, Emulfluid FD 12, Epikuron 100 P), the same lecithins which were found to contain residual proteins. Two lecithins with a protein content of less than 20 ppb did not bind IgE. EAST inhibition showed that the allergens from soy lecithin were immunologically more closely related to allergens from heat-treated soybeans than to those from raw soybeans. Protein blotting and immunodetection of the protein extract from the lecithins resulted in various allergen bands between 14 kDa and 94 kDa. A heat-stable allergen of 39 kDa was recognized by the monoclonal antibody and thus identified as a subunit of glycinin. The results obtained were confirmed by a mediator release assay based on a rat basophil leukemia cell line. Lecithins that contained residual proteins caused a specific mediator release, suggesting that these products may induce allergic symptoms. Our results show that soybean lecithins are capable of introducing hidden allergens to processed foods and that the IgE binding potential corresponds to the total protein determined by ELISA. Furthermore, it appears to be possible that by monitoring the protein content soy lecithins can be applied which may be safe for the allergic consumer. Received: 22 January 1998     

A Comparison of Organically and Conventionally Grown Foods—Results of a Review of the Relevant Literature

This review is concerned with the summary and evaluation of the results from more than 150 investigations comparing the quality of conventionally and organically produced food or of foods produced with the aid of different fertilisation systems. Cereals, potatoes, vegetables, fruits, wine, beer, bread, cakes and pastries, milk, meat, eggs and honey, as well as products made from them, have been included in the review. Most of the studies evaluated are physico-chemical investigations of concentrations of desirable and undesirable ingredients, pesticide residues, contaminants, sensory analyses and feed experiments with animals. Nutritional studies in humans and experiments which used holistic methods of analysis are also included. Since different methods of sampling were used in the investigations, a summary evaluation of individual results is extremely difficult. Even when the sampling methods are of the same type, a great many factors have to be taken into consideration which are not directly related to the production system but which do influence food quality to a large degree. Despite the heterogeneity of the sample material, some differences in quality between products from conventional and organic farming or foods produced with the aid of different fertilisation systems have been identified. © 1997 SCI     

ENDOW (efficient development of offshore wind farms): modelling wake and boundary layer interactions

While experience gained through the offshore wind energy projects currently operating is valuable, a major uncertainty in estimating power production lies in the prediction of the dynamic links between the atmosphere and wind turbines in offshore regimes. The objective of the ENDOW project was to evaluate, enhance and interface wake and boundary layer models for utilization offshore. The project resulted in a significant advance in the state of the art in both wake and marine boundary layer models, leading to improved prediction of wind speed and turbulence profiles within large offshore wind farms. Use of new databases from existing offshore wind farms and detailed wake profiles collected using sodar provided a unique opportunity to undertake the first comprehensive evaluation of wake models in the offshore environment. The results of wake model performance in different wind speed, stability and roughness conditions relative to observations provided criteria for their improvement. Mesoscale model simulations were used to evaluate the impact of thermal flows, roughness and topography on offshore wind speeds. The model hierarchy developed under ENDOW forms the basis of design tools for use by wind energy developers and turbine manufacturers to optimize power output from offshore wind farms through minimized wake effects and optimal grid connections. The design tools are being built onto existing regional‐scale models and wind farm design software which was developed with EU funding and is in use currently by wind energy developers. Copyright © 2004 John Wiley & Sons, Ltd.     

Uncertainty Matters: Computer Models at the Science–Policy Interface

The use of computer models offers a general and flexible framework that can help to deal with some of the complexities and difficulties associated with the development of water management plans as prescribed by the Water Framework Directive. However, despite the advantages modelling presents, the integration of information derived from models into policy is far away from being trivial or the norm. Part of the difficulties of this integration is rooted in the lack of confidence policy makers have on the incorporation of modelling information into policy formulation. In this paper we examine the reasons for this apparent lack of confidence and explore how some tools, presently in use, address this problem. We conclude that public confidence in models is highly dependent on the way uncertainties are addressed and suggest possible directions of action to improve the current situation. Four real case studies illustrate how computer models have been used in The Netherlands for carrying out management plans at regional and national scale. We suggest that the solution to integrate modelling information into policy formulation lies on both the modelling and the policy-making communities.     

Cost effectiveness of decentralized energy supply systems taking solar and wind utilization plants into account

In this article, results are presented of annual simulations of a decentralized (regional) plant for the power and heat supply of a residential complex. This complex consists of four houses with 40 flats all in all. The annual power consumption of the complex is 157 MWh and the heat requirement is 325 MWh. The concrete dynamics of the energy demands over the year is taken into consideration. The energy supply system is composed of a power-controlled combined heat and power (CHP) plant (55 kW), a photovoltaic plant (PV array or PV plant) array for power generation as well as a field of solar thermal collectors with a short-term accumulator for water heating and a long-term accumulator for supplying heat for domestic heating purposes. Simulation results demonstrate that synergetic effects result from the combination of a CHP plant with wind power and PV plants of varying sizes, which have an effect on the cost effectiveness of the plant as a whole with the different dynamics of energy sources (wind and solar energies) and of the consumption of power and heat being the decisive factors. The power deficits of wind power and PV plants are compensated through the application of a natural gas-operated CHP plant. In almost all variants, the demand for fossil energy carriers is distinctly less than in conventional energy supply plants.