The effect of stream regulation on the physico-chemical properties of the palmiet river,South Africa

The effect of regulation, by multiple impoundment, on ‘discontinuity’ (recovery) ‘distances’ (sensu Ward and Stanford, 1983) for various physico-chemical attributes of the Palmiet River (a short, steep gradient, cool temperate, acid, low-nutrient system) was investigated. Physico-chemical features were measured monthly, from February 1986 to August 1987, at 11 sites along the river, but concentrating on two zones: one below an upper-reach impoundment, Nuweberg Dam, and one below a middle-reach impoundment, Arieskraal Dam. Median total suspended solids, nitrates, nitrites and ammonium all increased below both dams with varying levels of ‘recovery’. Median spot temperatures, pH and alkalinity increased below Nuweberg, but decreased below Arieskraal Dam, whereas the converse was true for soluble reactive phosphate. Nuweberg had no effect on conductivity and total dissolved solids, while Arieskraal caused a slight decrease. The river remained well oxygenated down its length. Distinct seasonal variations were recorded for: flow rate, with flow reversal below Nuweberg and flow constancy below Arieskraal; temperature, with seasonal shifts and dampening of annual temperature range below both dams; alkalinity, with seasonal shifts below Arieskraal, and nitrites and nitrates, but not for any other attributes. At least partial recovery was noted in all cases, but in some instances, recovery was incomplete to the estuary. The implications of such alterations, for invertebrates, in terms of reduction in habitat diversity as well as for food supply must be considerable and studies are currently under way to determine community structure and diversity.     

Entire Life Time Monitoring of Filament Wound Composite Cylinders Using Bragg Grating Sensors: II. Process Monitoring

This article is the second of a series of three papers concerning monitoring of filament wound cylinders using Bragg gratings. In this second part, the tooling presented in Part I is used to embed gratings and thermocouples in filament wound glass reinforced epoxy composite cylinders during fabrication. Bragg grating strain was obtained from wavelength and temperature response, by a calibration technique described here. Results from tests on five cylinders show the Bragg grating’s capability to monitor strain evolution during fabrication, and the capacity to detect several phenomena occurring during cure is established, in addition to quantifying the initial material condition of the cylinder before it enters service.     

Genetic parameters for carcass composition and performance data in crossbred lambs measured by Video Image Analysis

A total of 7074 crossbred lambs, produced by mating crossbred Mule ewes with terminal sire rams were used in this study. Of these, 630 were scanned using a Video Image Analysis (VIA) to estimate carcass quality traits. Genetic parameters for average daily gain (ADG), scanning live weight (SW), ultrasonic measures of muscle (UMD) and fat (UFD) depths, cold carcass weight (CCW) and VIA measurements of primal carcass joint weights (LEG, CHUMP, LOIN, BREAST and SHOULDER) were estimated using multivariate animal models. Additionally, VIA traits were evaluated under a repeatability model, considering the primal joints as repeated measures of the same trait. Direct heritability estimates were low to moderate (0.08–0.26) for VIA measurements of primal joints. Repeatability estimates for VIA traits were high (>0.90). Moderate to high heritability estimates (0.25–0.55) were found for performance traits (ADG, SW, UMD and UFD) and CCW. Genetic correlations between VIA traits and ADG were strong (0.75–0.93). Most of the VIA traits were highly correlated to SW (0.60–0.97). UFD was significantly negatively correlated with UMD (−0.22), ADG (−0.18) and CCW (−0.18). The results of this study suggest that selection on performance and carcass traits, measured by VIA, could possibly improve primal meat yield of carcass cuts without increasing the overall carcass fatness. High repeatability estimates of VIA traits and moderate heritabilities of the most valuable carcass joints suggests that including VIA information in breeding programs would be useful in order to improve carcass quality.     

Transient conduction in a slab with chemical reaction

The heat-balance integral technique is used to analyse a one-dimensional transient conduction process. Heat is transferred by convection to the surface of a slab and when the surface temperature reaches a certain value, an endothermic reaction is triggered which propagates as an isothermal front in the same direction as the conduction front. Two possible routes to the fully developed heat transfer condition are treated in a way which allows the approximate temperature distribution in the slab to be predicted as a function of the main process variables.     

Analysis and evaluation of permeability techniques for characterizing fine particles Part I. Diffusion and flow through porous media

The specific surface area and particle size can be deduced with speed and simplicity from appropriate measurements and calculations of fluid flow and diffusion in porous media. The interdependence of these two processes is developed in a series of two articles.In Part I, models are presented for molecular and Knudsen diffusion during flow through aggregates of solid particles at both atmospheric and low pressure permeametric conditions. For a randomly packed bed of granular particles, a cell model is developed that takes into account the tortuosity and variations in the cross-sectional area. A new analytical expression for the Kozeny constant is derived in terms of the bed porosity and particle shape. The effect of porosity on surface area measurements using permeability methods is explained.     

Influence of adhesive bond line thickness on joint strength

While the geometry of aerospace assemblies is carefully controlled, for many industrial applications such as marine structures bond line thickness can vary significantly. In this study epoxy adhesive joints of different thicknesses between aluminium substrates have been characterized using physico-chemical analyses (differential scanning calorimetry, DSC; dynamic mechanical analysis, DMA; spectroscopy), nano-indentation and mechanical testing. Thermal analyses indicated no influence of thickness on structure. Nano-indentation revealed no evidence of an interphase at the metal/epoxy interface, nor any change in modulus for different thicknesses, though Raman spectroscopy suggested there may be slight variations in composition close to the substrates. However, mechanical testing using the modified Arcan fixture indicated a significant drop in strength and failure strain under pure tension and a smaller reduction for tension/shear and pure shear loads as thickness increased. Examination of sections through joints did not indicate any physical reason for this, but numerical analysis of the stress state revealed larger stress concentration factors for tensile loading in thick joints, which may explain the thickness effect. It is recommended that joint thickness should be kept below 0.8 mm to avoid obtaining artificially low values with the Arcan test.     

A broad line n.m.r. study of oriented poly(vinylidene fluoride)

Broadline nuclear magnetic resonance measurements have been carried out for the proton resonance in oriented poly(vinylidene fluoride). The spectra in general show two component lines with distinctly different line widths. The broad component shows a high degree of molecular orientation and can be satisfactorily assigned to the crystalline regions of the polymer. The narrow component corresponds to an oriented non crystalline phase which is sufficiently constrained to allow motion about the chain axis only. An appreciable decrease in the value of the rigid mass fraction was observed in both of the samples over the temperature range examined. Our calculations indicate that this could play an important role in the temperature dependence of the pyroelectric response of this material.     

Biosecurity Measures to Control Salmonella and Other Infectious Agents in Pig Farms: A Review

Salmonellosis is the 2nd most common cause of human bacterial food poisoning and can be acquired from meat or eggs, either via direct consumption or cross‐contamination in the kitchen. The European Commission has set the criteria to control Salmonella infections within the poultry sector and it is proposed that the swine sector should follow. Pork is considered, after eggs, the major source of infection in humans in the EU, with Salmonella typhimurium, including monophasic strains, being frequently implicated. Good control measures at the farm level are likely to correspond with lower prevalence of Salmonella infection and, subsequently, a reduction of cross‐contamination of carcasses processed at the slaughterhouse and a reduction in human salmonellosis. This review focuses on biosecurity measures in pig farms that can help to control important pig diseases at the same time as reducing the within‐herd prevalence of Salmonella. This information is likely to provide an economic incentive for farmers to apply improved general standards of farm biosecurity and hygiene management that would have a positive impact in food safety.     

Kirchhoff's circulation law applied to multi-loop kinematic chainsApplication de la loi de Kirchhoff aux chaines cinematiques

Kirchhoff's circulation law for potential difference is adapted to the purpose of finding a set of independent instantenous screw motors associated with any two bodiesin a kinematic chain when the configuration of the kinematic chain is given. Every possible instantaneous relative motion of two bodies can be found from linear combinations of the screw motors of the set. The procedure is applicable to any kinematic chain: it does not require special cases to be identified. It leads to a matrix formulation for which well-established numerical methods of solution are available.