Hybrid cam mechanisms

This paper investigates the problem of driving a machine with several reciprocating heavy inertias. The drive should also realize some programmable flexibility of the motion, so that the operation of the machine, e,g., synchronization between different motions and duration of standstills, can easily be modified. The use of a single servomotor for every motion is not the best solution, since it does not allow for energy recuperation. This means that the installed servomotor power will be much higher than the required net peak power for the machine as a whole. The presented solution, however, reduces the servomotor peak torque and power by one order of magnitude, and makes energy transfer between the motions possible. The hybrid cam mechanism consists of a hybrid drive, which is a combination of a servomotor, a constant velocity motor and a cam follower mechanism. The operation principle exploits the nonlinear characteristics of the cam to add flexibility at low cost of energy. The hybrid solution is particularly successful for motions involving high peak acceleration. In addition, the concept can be used to reject disturbances. Simulations show the performance of the hybrid cam mechanism.     

Tri-Reforming of Methane over NdM0.25Ni0.75O3 (M = Cr,Fe) Catalysts and the Effect of CO2 Composition

Catalysis Letters - The NdM0.25Ni0.75O3 (M?=?Cr, Fe) named NCN and NFN catalysts precursors were synthesized and characterized. The CO2 utilization in the feed was studied in the...     

Selective hydrogenation of soybean oil in the presence of copper catalysts

Many investigators associate the poor keeping properties of soybean oil with its linolenic acid content. On the other hand the high linoleic acid content is a desired property from a nutritional point of view. We have therefore developed a process for the preferential reduction of the linolenic acid content by selective hydrogenation. Conventional catalysts for the hydrogenation of fats have a rather low selectivity in this respect. When linolenic acid in soybean oil is hardened (e.g., with a nickel catalyst), most of the linoleic acid is converted into less unsaturated acids. It was found that linolenic acid is hydrogenated much more preferentially in the presence of copper catalysts than in that of nickel and other hydrogenation catalysts. At a linolenic acid content of 2%, soybean oil hardened with nickel catalyst contained about 28% linoleic acid, whereas with copper catalyst the hardened soybean oil contained 49% linoleic acid. By means of our process it is possible to manufacture a good keepable oil of, e.g., I.V. 115 and containing 1% linolenic acid and 46% linoleic acid. The storage stability of this product is comparable with that of sunflower-seed oil. A liquid phase yield of 86% is obtained after winterization at 5C for 18 hr. The high selectivity for linolenate reduction of copper catalysts must be ascribed to the copper part of the catalyst. Investigations into the structure of the catalyst indicate that the active center consists of copper metal crystallites; whether these centers are promoted by the carrier or traces of other substances is under investigation.     

Hepatic damage produced by long-term alcohol consumption in well-nourished rats

A study of the effect of long-term alcohol consumption on the liver of well-nourished rats is described. Rats fed for 16 weeks on a semipurified diet supplemented with high levels of vitamins and lipotropic factors and alcohol corresponding to 35% of the total caloric intake developed marked fatty changes of the liver. Mild fatty changes were observed in pair-fed controls receiving as isoenergetic equivalent of sucrose instead of alcohol. Intracellular hyaline bodies, corresponding ultrastructurally to giant mitochondria were abundantly found in the hepatocytes of alcoholic rats, while in the controls they were not seen. Te findings in this investigation are postulated to provide further evidence that the long-term intake of alcohol exerts a direct causative role in the pathogenesis of liver damage.     

Biosynthesis of unsaturated fatty acids in the diatomPhaeodactylum tricornutum

The biosynthesis of fatty acids in the diatomPhaeodactylum tricornutum was studied. The diatom was incubated with sodium [1¹⁴C] acetate and the acids [1-¹⁴C] palmitic, [1-¹⁴C] stearic, [1-¹⁴C] linoleic and [1-¹⁴C] α-linolenic. The distribution of radioactivity in the products was determined by gas liquid radiochromatography. The diatom synthesized “de novo” not only saturated and monounsaturated fatty acids, but also linoleic, α-linolenic and other fatty acids including the highly polyunsaturated 20∶5ω3 and 22∶6ω3. When labeled acetate, stearic, α-linolenic or even linoleic acid were incubated with the diatom, the polyunsaturated C₂₀ fatty acids synthesized belonged predominantly to the ω 3 family. The existence of Δ9, Δ6, Δ5, Δ4, ω6 and possibly ω3 desaturases inP. tricornutum is suggested. Member of the Carrera del Investigador Científico of the Comisión de Investigaciones Científicas de la Provincia de Buenos Aires. Member of the Carrera del Investigador Cientifico of the Consejo Nacional de Investigaciones Cientificas y Técnicas.     

Dyeing Properties of a Polyamide–Epichlorohydrin Resin

The dyeing behaviour of cured films prepared from a polyamide–epichlorohydrin resin (Hercosett) was examined in orderto obtain a better understanding of the dyeing beha viour of Hercosett–treated wool. The polymer films swell by 500–1000%. The swelling decreases with increasing dye content in the polymer and with increasing temperature. The diffusion of acid dyes into the polymer is extremely fast (D =10^-7 cm²/s), and can be accelerated by the addition of salt. The sorption of the dye is described in terms of a Langmuir isotherm, indicating that an ion–exchange mechanism is operative. The concentration of cationic groups in the polymer is very high (2. 4mo//kg) and does not depend on the curing conditions. The addition of salt reduces the exhaustion of the dyebath. Reactive dyes were found to be bound covalently to the resin. During industrial resin treatment it has been shown that the molecular weight distribution of the Hercosett in the resin bath changes markedly, molecular weight increasing with running time and the spread of values being much narrower. This may explain the variation in the dyeing behaviour of wool fibres that have been treated at different times in the same resin bath.     

Simulation of the nitrogen balance in the soil and a winter wheat crop

A simulation model for winter wheat growth, crop nitrogen dynamics and soil nitrogen supply was tested against experimental data. When simulations of dry matter production agreed with measurements, nitrogen uptake was simulated accurately. The total amount of soil mineral nitrogen as well as the distribution of mineral nitrogen over the various soil layers were generally simulated well, except for experiments in which fertilizer was applied late in spring. In these experiments, applied nitrogen disappeared because it could not be accounted for by the model. Some explanations for this disappearance are briefly discussed.     

Functional properties of a protein product from Caryodendron orinocense (Barinas nut)

The functional properties of Caryodendron orinocense protein product were investigated and compared with those of soybean (Glycina maxima). The product protein content was 24.47 g/100 g (Nx6.25). Solubility increased at both sides of the isoelectric point (pH 4.0) and with increased NaCl concentration up to 0.5M. Compared with soybean flour (50% protein), the protein product exhibited higher water and oil absorption, but lower emulsifying activity, emulsion stability, foaming capacity, and foam stability, the last one increase at higher pH. Emulsifying activity, foaming capacity, and foam stability were ionic strength dependent. C. orinocense protein product increased its emulsifying activity steadily from 0.05M to 0.75M NaCl, while it remained almost constant for soybean flour. Foaming capacity increased drastically at pH 10. The minimum time and concentration to form a gel was 20% in 4 min and 10% in 8 min for the Caryodendron protein product and soybean flour, respectively. The bulk density was 0.5056+/-0.0041 g/mL.