DX型数据采集与无线传输系统

DX型数据采集与无线传输系统能对油井压力、温度、载荷和流量等参数进行自动采集 ,并通过无线传输向总站提供实时参数 ,为及时决策提供信息。数据采集系统采用STD总线 ,测量精度高、故障低 ;无线传输系统采用短波电台和具有自动纠错功能的数传机 ,抗噪能力强、可靠性高。文章介绍了DX型数据采集与无线传输系统的组成、工作原理、功能和主要技术指标     

In vivo validation of a thermodilution system designed to measure peripheral blood flow

A 5F triple-lumen thermodilution catheter was evaluated in a canine vena cava model to determine whether this catheter and the thermodilution technique provide valid in vivo determinations of blood flow. Our ultimate goal is to develop methods for studying limb blood flow in humans. Seven dogs were studied. Blood flow was provided and regulated by a calibrated roller pump. Flow rate determinations by thermodilution were made over a range of 0.5 to 5.01 1/minute. Excellent correlation (r = 0.98, r2 = 0.96, P less than 0.01) was found between actual flow and flow measured by thermodilution. The mean (+/- SD) coefficient of variation for the thermodilution method was 9.97 +/- 5.72 per cent over the flow range tested. The coefficient of variation tended to be higher at low flow rates. The thermodilution technique with this catheter provides valid in vivo determinations of blood flow through large vessels. This technology can be rationally applied to the study of limb blood flow in humans.     

Evaluating the solar resource: a review of problems resulting from temporal, spatial and angular variations

Accurate assessment of the availability of solar energy at the Earth's surface is hampered by difficulties associated with the variability of solar radiation in space and time and with the angular position in the sky hemisphere. This paper assesses each of these problem areas by highlighting the difficulties and the attempts to offset them. Major emphasis is placed on extrapolation and interpolation procedures, the sensitivity of inclined surfaces to variations in the solar input, numerical models for calculating the irradiance of inclined surfaces and the time scales for which these computations are valid.Finally, the reader is urged to consider the significance of these difficulties in light of both radiation measurement errors and the sensitivity of the application to imprecise determinations of the radiation environment.     

湖北民营企业竞争力状况与提升策略分析

描述了湖北省民营企业的现状和特点,在此基础上分析了其竞争力的表现及原因,最后从企业层面和宏观层面提出了相应的对策.     

Numerical convergence for the Bellman equation of stochastic optimal control with quadratic costs and constraints

A predictor-corrector, Crank-Nicolson computer algorithm is examined for the Bellman equation of stochastic optimal control with quadratic costs and constrained control. A linearized comparison equation is heuristically derived for the nonlinear and discontinuous Bellman equation. Convergence of the method is studied using von Neumann's Fourier stability method. A mesh-ratio-type condition for the convergence is derived for the comparison equation. This condition is uniform for both parabolic and hyperbolic versions of the nonlinear equation. The results are valid for Gaussian stochastic noise and Poisson noise.     

Immunoreactivity of Brazilian HIV isolates with different V3 motifs

The influence of noncompetitive (MK-801), competitive (AP-7) and the antagonist of polyamines site of NMDA receptor (arcaine) on the central activity of angiotensin II (A II) was studied. The open field test, conditioning of active avoidance responses (CARs) and passive avoidance situation was used to investigate learning and memory in rats. All used antagonists decreased beneficial action of A II on these processes.     

Enzymatic preparation of heparin oligosaccharides containing antithrombin III binding sites

Two new oligosaccharides were prepared from heparin by its partial depolymerization using heparin lyase I (EC 4.2.2.7) in an attempt to prepare oligosaccharides having intact antithrombin III binding sites. The oligosaccharides were purified by chromatography on the basis of both size and charge and demonstrated a high level of purity by capillary electrophoresis. One- and two-dimensional 1H NMR spectroscopy at 500 MHz revealed the structure of each oligosaccharide. The octasaccharide and decasaccharide are DeltaUAp2S(1-->4)-alpha-DGlcNpS6S(1-->4)-alpha-L-IdoAp (1-->4)-alpha-D -GlcNpAc6S(1-->4)-betaD-GlcAp(1-->4)-alpha-D-GlcNpS 3S6S(1-->4)-alpha- L-IdoAp2S(1-->4)alpha-D-GlcNpS6S (where DeltaUAp is 4-deoxy-alpha-L-threo-hex-enopyranosyluronic acid, GlcNp is 2-amino-2-deoxy-glucopyranose, GlcAp is glucopyranosyluronic acid, S is sulfate and Ac is acetate) and DeltaUAp2S(1-->4)-alpha-D-GlcNpS6S(1-->4)-alpha-L-IdoAp++ +(1-->4)-alpha- D-GlcNpAc6S (1-->4)-beta-D-GlcAp(1-->4)-alpha-D-GlcNpS3S6S(1-->4)-alpha- L-IdoAp2S (1-->4)-alpha-D-GlcNpS6S(1-->4)-alpha-L-IdoAp2S(1-->4)-alpha -D-GlcNpS 6S, respectively. A hexasaccharide containing a similar structural motif to that found in the antithrombin III binding site and having greatly reduced anticoagulant activity was also isolated. The structure of the hexasaccharide is DeltaUAp2S(1-->4)-alpha-D-GlcNpAc6S(1-->4)-beta-D-GlcAp++ +(1-->4)-alpha- D-GlcNpS3S6S(1-->4)-alpha-L-IdoAp(1-->4)-alpha-D-GlcNpS6S . The octasaccharide and decasaccharide correspond to the predominant structural motif found in porcine intestinal mucosal heparin. Sufficient quantities of the decasaccharide were obtained to examine its interaction with antithrombin III using microtitration calorimetry. This decasaccharide bound to antithrombin III with similar avidity as heparin and showed comparable anticoagulant activity, as determined using an antithrombin III dependent anti-factor Xa assay. Interestingly, while both decasaccharide and heparin bound to antithrombin with nanomolar affinity, very little heat of binding was observed.     

Study of etch rate characteristics of SF6/He plasmas byresponse-surface methodology: effects of interelectrode spacing

The characteristics of SF₆/He plasmas which are used to etch Si₃N₄ have been examined with experimental design and modeled empirically by response-surface methodology using a Lam Research Autoetch 480 single-wafer system. The effects of variations of process gas flow rate (20-380 sccm), reactor pressure (300-900 mtorr). RF power (50-450 W at 13.56 MHz), and interelectrode spacing (8-25 mm) on the etch rates of LPCVD (low-pressure chemical vapor deposition) Si₃N₄, thermal SiO₂, and photoresist were examined at 22±2°C. Whereas the etch rate of photoresist increases with interelectrode spacing between 8 and 19 mm and then declines between 19 and 25 mm, the etch rate of Si₃N ₄ increases smoothly from 8 to 25 mm, while the etch rate of thermal SiO₂ shows no dependence on spacing between 8 and 25 mm. The etch rates of all three films decrease with increasing reactor pressure. Contour plots of the response surfaces for etch rate and etch uniformity of Si₃N₄ as a function of spacing and flow rate at constant RF power (250 W) display complex behavior at fixed reactor pressures. A satisfactory balance of etch rate and etch uniformity for Si₃N₄ is predicted at low reactor pressure (~300 mtorr), large electrode spacing (12-25 mm), and moderate process gas flow rates (20-250 sccm)     

Is insurance for children enough? The link between parents'' and children''s health care use revisited

The gutless hydrothermal tubeworm Riftia pachyptila Jones relies mainly on its chemoautotrophic bacterial symbionts to supply nutrients in the form of secreted organic compounds resulting from fixation and incorporation of CO2. In this study, symbionts were purified, tested for viability, and incubated in the presence of labeled CO2. We demonstrated that purified symbionts can be used as a viable alternative to experiments with bacterial cultures. Several organic acids, sugars, and amino acids were labeled, but their fraction of the total label stayed generally constant during the incubation times used. However, increasing fractions of succinate and, to a lesser degree, glutamate were excreted into the incubation medium, indicating that these are probably the main carbon-containing compounds transferred from the symbionts to the host. Glutamate could also account for the transport of nitrogen from the symbionts to the host.     

面心纯铝单向拉伸的晶体塑性学有限元模拟

基于率相关晶体塑性本构模型,实现了晶体塑性学有限元模拟过程。直接将电子背散射衍射(EBSD)获取的晶粒初始取向输入晶体塑性有限元模型,分别预测了单向拉伸面心1050纯铝过程中的力学响应与织构演化。应力应变响应数值模拟结果与实验结果有较好的一致性,同时也存在一定的偏差。两种多晶模型(Taylor模型和有限单元模型)分别模拟了单向拉伸真应变0.25和0.37时的织构演化。随着真应变的增加,两种丝织构(〈111〉织构和〈100〉织构)变得更加锋锐,模拟结果与EBSD实验测得的织构演化结果有较好的一致性。