Processing and electromechanical properties of high-coercive field ZnO-doped PIN-PZN-PT ceramics

This study explores sintering and piezoelectricity of ZnO-doped perovskite Pb(In_1/2Nb_1/2)O₃-Pb(Zn_1/3Nb_2/3)O₃-PbTiO₃ (PIN-PZN-PT) ceramics. The enhanced densification of ZnO-doped PIN-PZN-PT is attributed to the formation of oxygen vacancies by the incorporation of Zn²⁺ into the perovskite B-site and increased rate of bulk diffusion relative to undoped PIN-PZN-PT. Incorporation of Zn²⁺ into the perovskite lattice increased the tetragonal character of PIN-PZN-PT as demonstrated by tetragonal peak splitting and increased Curie temperature. Sintering in flowing oxygen reduced the solubility of Zn²⁺ in the perovskite lattice and resulted in rhombohedral PIN-PZN-PT. Sintering in oxygen prevented secondary phase formation which resulted in a high-piezoelectric coefficient (d₃₃ – 550 pC/N), high-coercive field (E_c – 13 kV/cm), and high-rhombohedral to tetragonal phase transition temperature (T_r-t – 165°C). We conclude that ZnO-doped PIN-PZN-PT ceramics are excellent candidates for high-power transducer applications.     

Glycosylation in Indolent,Significant and Aggressive Prostate Cancer by Automated High-Throughput N-Glycan Profiling

The diagnosis and treatment of prostate cancer (PCa) is a major health-care concern worldwide. This cancer can manifest itself in many distinct forms and the transition from clinically indolent PCa to the more invasive aggressive form remains poorly understood. It is now universally accepted that glycan expression patterns change with the cellular modifications that accompany the onset of tumorigenesis. The aim of this study was to investigate if differential glycosylation patterns could distinguish between indolent, significant, and aggressive PCa. Whole serum N-glycan profiling was carried out on 117 prostate cancer patients’ serum using our automated, high-throughput analysis platform for glycan-profiling which utilizes ultra-performance liquid chromatography (UPLC) to obtain high resolution separation of N-linked glycans released from the serum glycoproteins. We observed increases in hybrid, oligomannose, and biantennary digalactosylated monosialylated glycans (M5A1G1S1, M8, and A2G2S1), bisecting glycans (A2B, A2(6)BG1) and monoantennary glycans (A1), and decreases in triantennary trigalactosylated trisialylated glycans with and without core fucose (A3G3S3 and FA3G3S3) with PCa progression from indolent through significant and aggressive disease. These changes give us an insight into the disease pathogenesis and identify potential biomarkers for monitoring the PCa progression, however these need further confirmation studies.     

The influence of soil properties on the effectiveness of phenylphosphorodiamidate (PPD) in reducing ammonia volatilization from surface applied urea

Urea can be an inefficient N source due to rapid hydrolysis by soil urease leading to NH₃ volatilization. The current study investigated the effect of the urease inhibitor phenylphosphorodiamidate (PPD) incorporated at two concentrations (0.5% and 1% w/w) within the fertilizer granule on NH₃ volatilization from surface applied urea. The daily rates of NH₃ loss from 20 soils of widely differing properties from Northern Ireland were measured over 14 days using ventilated enclosures under simulated spring conditions. Cumulative loss rates were calculated and fitted to a logistic model from which total NH₃ loss (Amax) and the time to maximum rate of loss (Tmax) were determined. Stepwise multiple linear regression analysis related the effectiveness of PPD in reducing NH₃ volatilization from urea to soil properties.The total cumulative loss of ammonia from unamended urea varied from 0.37 to 29.2% depending on soil type. Ammonia volatilization appeared to be greatest on a soil with a high pH (R² = 0.65), a low titratable acidity (TA) (R² = 0.63) and a soil that was drying out (R² = 0.50). Soil pH was negatively correlated with TA (r = –0.826, P < 0.001) suggesting that soils with a low TA may have received recent lime. Including cation exchange capacity (CEC) and % N as well as pH-KCl in the multiple linear regression equation explained 86% of the variance.The effectiveness of PPD in reducing Amax varied between 0% to 91% depending on soil type, the average over all 20 soils being 30 and 36% for 0.5% and 1% PPD respectively. The most important soil properties influencing the effectiveness of the urease inhibitor were soil pH-H₂O and TA accounting for 33% and 29% of the variance respectively. PPD was less effective on a soil with a high pH and low TA. These were the soil conditions that led to high NH₃ volatilization from unamended urea and may explain why PPD had limited success in reducing ammonia loss on these soils. Multiple linear regression analysis indicated that 75% of the variation in the % inhibition of NH₃ loss by PPD could be significantly accounted for by pH-H₂O, initial soil NO ₃ ^- -N concentration, % moisture content and % moisture loss.The delay in Tmax by PPD ranged from 0.19 to 7.93 days, the average over all 20 soils being 2.5 and 2.8 days for 0.5% and 1% PPD respectively. TA, % moisture content, urease activity and CEC were soil properties that significantly explained 83% of the variation in the % delay in Tmax by PPD in multiple linear regression analysis. However, none of these soil properties were significant on their own. As urea hydrolysis occurs rapidly in soil, delaying Tmax under field conditions would increase the chance of rain falling to move the urea below the soil surface and reduce NH₃ volatilization. A urease inhibitor should be more effective than PPD on soils with a high pH and low TA to be successful in reducing high NH₃ losses.     

Copolyimides from 2,3,3′,4′-biphenyltetracarboxylic dianhydride and pyromellitic dianhydride with 4,4′-oxydianiline

A series of copolyimides were prepared via the polyamide acids (polyamic acids) from the reaction of 2,3,3′,4′-biphenyltetracarboxylic dianhydride (a-BPDA) and pyromellitic dianhydride (PMDA) with 4,4′-oxydianiline (4,4′-ODA) at dianhydride molar ratios of 9:1, 7:3, 1:1, 3:7 and 1:9. Homopolymers and a 1:1 polymer blend were also prepared. Films from the 7:3, 1:1 and 3:7 molar ratio polyamide acids reacted for 5-6 h at ambient temperature were brittle, whereas films from the same polyamide acids reacted for 24-48 h at ambient temperature were fingernail creaseable. The difference was apparently due to the initial formation of incompatible block domains that underway randomization upon longer reaction time. The differential scanning calorimetric (DSC) curves of some of the brittle films quenched after heating to 400 °C had two apparent glass transition temperatures (T_gs), indicative of two block domains. The creaseable films quenched after heating to 400 °C had single T_gs. Wide-angle X-ray diffraction showed all films to be amorphous even though the initial DSC curves showed strong endothermic peaks, generally associated with crystalline melts. These strong endotherms near the T_g region were thought to be due to relaxation of regions in the highly stressed films. Films of copolyamide acids from the reaction of 1:1 molar ratios of 3,3′,4,4′-oxydiphthalic anhydride/a-BPDA and 3,3′,4,4′-biphenyltetracarboxylic dianhydride/a-BPDA with 4,4′-ODA reacted for 6 h were fingernail creaseable. The chemistry and the properties of the copolymers are compared with those of the homopolymers.     

Effect of upset forging on microstructure and tensile properties in a devitrified Al–Ni–Co–Y Alloy

Devitrified Al—transition metal—rare earth alloys offer routes to obtain higher volume fractions of dispersed strengthening phases than conventional precipitation routes. Here, we report a study of the microstructure–property relationships of an Al–Ni–Co–Y alloy processed by gas atomization and consolidated/devitrified by warm extrusion. Microstructural characterization by electron microscopy and serial section FIB tomography show that the alloy comprises an FCC Al matrix and 44 % by volume of elongated Al₁₉(Ni,Co)₅Y₃ plates with the Al₁₉Ni₅Gd₃ structure. The plates are aligned with the extrusion direction in the as-extruded alloy, and tensile data show a distinct anisotropy in yield strength and strain to failure. These data are consistent with the alloy acting more like a unidirectional short-fiber-reinforced metal–matrix composite than a conventional precipitation-hardened alloy. During axial upset forging, the ternary plates do not break up, but instead they rotate, until at large upset strains they lie perpendicular to their original orientation with corresponding changes in the tensile properties. The materials exhibit yield strengths of up to 713 MPa and tensile elongations of up to 5 %. Thus, such systems could form the basis for truly deformable high-strength low-density metal–matrix composites.     

Enriching our theoretical repertoire: the role of evolutionary psychology in technology acceptance

Information systems (IS) research has drawn heavily on social and cognitive psychology to explain technology adoption. Indeed, the many variations of the technology acceptance model all share these same theoretical foundations. Focusing exclusively on the socio-cognitive lens can lead to overlooking enhanced explanations of technology acceptance, such that new theoretical perspectives may be warranted. In this qualitative grounded theory study, we discovered how the lens of evolutionary psychology, as embodied in the Four-Drive model, was helpful in understanding technology acceptance across three organizational sites. We contend that evolutionary psychology is an important addition to the theoretical repertoire of IS researchers, and propose including ‘evolved psychological mechanisms’ within traditional models of technology acceptance.