A Chaucer microstrip fractal antenna for mobile applications

In this paper a Chaucer fractal patch antenna integrated with split ring structure is simulated using Ansoft’s (HFSS), as well as fabricated and tested using VNA. The obtained results indicate that the proposed antenna resonates at 2.4 GHz in the ISM band. In addition, the structure offers multi-band operation with the fair value of return loss, gain, and bandwidth, impedance and directivity in the entire range of frequency operation.     

Effect of hydrophilic and hydrophobic polymers on permeation of S-amlodipine besylate through intercalated polymeric transdermal matrix: 3(2) designing,optimization and characterization

Objective: Innovation in material science has made it possible to fabricate a pharmaceutical material of modifiable characteristics and utility, in delivering therapeutics at a sustained/controlled rate. The objective of this study is to design and optimize the controlled release transdermal films of S-Amlodipine besylate by intercalating hydrophilic and hydrophobic polymers.

Methods: 3(2) factorial design and response surface methodology was utilized to prepare formulations by intercalating the varied concentration of polymers(A) and penetration enhancer(B) in solvent. The effect of these independent factors on drug release and flux was investigated to substantiate the ex-vivo, stability and histological findings of the study.

Results: FTIR, DSC revealed the compatibility of drug with polymers; however, the semicrystallinity in drug was observed under PXRD. SEM micrographs showed homogeneous dispersion and entanglement of drug throughout the matrix. Results from the permeation study suggested the significant effect of factors on the ex vivo permeation of drug. It was observed that drug release was found to be increased with an increase in hydrophilic polymer concentration and PE. The formulations having polymers (EC:PVPK-30) at 7:3 showed maximum drug release with highest flux (102.60?±?1.12?µg/cm²/h) and permeability coefficient (32.78?±?1.38?cm/h). Significant effect of PE on lipid and protein framework of the skin was also observed which is responsible for increased permeation. The optimized formulation was found to be stable and showed no-sign of localized reactions, indicating safety and compatibility with the skin.

Conclusion: Thus, results indicated that the prepared intercalated transdermal matrix can be a promising nonoral carrier to deliver effective amounts of drug.     

Effect of bacterial inoculum ratio in mixed culture for decolourization and detoxification of pulp paper mill effluent

BACKGROUND: Effluent released from industry is a mixture of various pollutants. For the degradation of complex pollutants, mixed bacterial cultures can be more effective than a single culture. This study investigated the balance of bacterial populations in a mixed culture for maximum reduction of pollutants. RESULTS: This study deals with the degradation and detoxification of pulp paper mill effluent (PPME) by three bacterial strains, i.e. Serratia marcescens, Serratia liquefaciens and Bacillus cereus in different ratios, and found that two ratios, 4:1:1 and 1:4:1, were effective for the degradation of PPME. These ratios reduced the various pollution parameters. Enzyme bioassay revealed that more enzyme was produced during degradation for the ratio 4:1:1. High performance liquid chromatography (HPLC) analysis showed that the ratio 4:1:1 degraded 95% of lignin and related compounds, and chlorophenols up to 98%, whereas ratio 1:4:1 reduced lignin by 84% and chlorophenols by 58% after 7 days incubation. Degradation products were confirmed by gas chromatography–mass spectrometry (GC‐MS) analysis. A seed germination bioassay on Phaseolous mungo L. revealed that toxicity was reduced by the ratio 4:1:1. CONCLUSION: Due to variable potential of different bacteria show variation in their growth pattern at any contaminated site. This study shows that an appropriate ratio of mixed cultures is required for maximum degradation and detoxification of PPME. Copyright © 2012 Society of Chemical Industry     

Physico chemical,microstructural and sensory characteristics of low‐fat meat emulsion containing aloe gel as potential fat replacer

In this study, a possible use of aloe gel (AG) as a potential fat replacer in the manufacture of low‐fat meat emulsion was investigated. The low‐fat meat emulsions with added AG and vegetable oil (VO) in different proportions [AG7.5 (7.5% AG + 7.5% VO); AG5 (5% AG + 10% VO); AG2.5 (2.5% AG + 12.5% VO)] were compared with full‐fat meat emulsion [Control (15% VO only)]. A substantial fat reduction (P < 0.05) up to 50% as compared to full‐fat control meat emulsion was recorded without compromising other sensory attributes of meat emulsion. Microstructural properties as studied by scanning electron microscopy indicated more homogenous regular emulsion matrix with fewer cracks and more regular shaped oil droplets in AG‐added samples than the control samples.     

Tuning of Cloud Point by the Nature of Surfactant Headgroup: Influence of Counterion and Additives

Work was performed to distinguish the role of sulfonate (–SO₃ ^?) and sulfate (–OSO₃ ^?) with respect to the micellization and clouding phenomenon in ionic surfactant solutions. The clouding phenomenon is a recent addition to the conventional one observed with nonionic surfactants. Three ionic surfactants [sodium dodecylsulfate (SDS), sodium dodecylbenzenesulfonate (SDBS), and sodium dodecylsulfonate (SDSo)] are chosen and the effects of added tetra-n-pentylammonium bromide (TPeAB) and benzyl tributylammonium bromide (BTAC) have been studied on micellization and clouding behaviors in aqueous solution. Based on critical micelle concentration (CMC) and cloud point (CP) measurements, the following order has been observed: SDBS < SDS < SDSo. Though both SDBS and SDSo contain sulfonate groups, they are found at the two ends of the ordering. Therefore, the role of the phenyl ring is also having importance in clouding phenomena. For a typical surfactant, TPeAB was found to be more effective than BTAC. Based on the CP studies, two compositions of SDSo + TPeAB/BTAC were chosen and the effects of different additives (carbohydrate, amino acid, and l-ascorbic acid) on the CP were investigated. Additive may either decrease or increase CP, depending on the structure of the counterion or additive. The present work shows a few novelties: (1) headgroup/counterion dependence of CP and (2) hydrophobicity of counterion/surfactant has an important bearing on the phenomenon. The data can be utilised in improving cloud point extraction methodologies (CPEMs).     

Water generation from atmospheric air by using different composite desiccant materials

In this communication, new composite desiccant materials having 37% concentration of CaCl₂ have been compared for water production from atmospheric air. The vermiculite–saw wood, jute and burnt-clay have been used as host materials and CaCl₂ as a hygroscopic salt. All the desiccant materials have been tested with the solar glass desiccant box type system (SGDBS) with a collector area of 0.36?m². Design parameters for water production are: height of the glass from the desiccant bed to be 0.22?m, an inclination angle of 30°, the effective thickness of the glass as 3?mm and the number of glazing is single. It has been found that on the experimental day, the maximum amount of fresh water generated by the vermiculite–saw wood/CaCl₂ is 130?ml/kg/day.     

Assessment of Interface Trap Charges on Proposed TFET for Low Power High-Frequency Application

Silicon - Accumulation of trap charges at the semiconductor and oxide interface is the most dominating factor and cannot be neglected as it degrades device performance and reliability. This...