Neutral lipids of chickpea flour and protein isolates

The neutral lipids composition of defatted chickpea flour and two types of protein isolates has been studied. The main compounds in neutral lipids are triacylglycerols, free fatty acids, and diacylglycerols. Other compounds present are wax esters, free fatty alcohols, and free sterols. The main fatty acids in neutral lipids are C_18:2 and C_18:1 among the unsaturated, and C_16:0 and C_18:0 among the saturated acids. Free and esterified alcohols range from C_16:0 to C_28:0, the majority being those with an even number of carbon atoms. Sterols observed are β-sito-sterol, campesterol, stigmasterol, and δ-5-avenasterol. Triacyl-glycerols are partially hydrolyzed, and the amounts of unsaturated sterols and unsaturated fatty acids are reduced as a result of the chemical treatment during production of the protein isolates.     

Developing pyrrole-derived antimycobacterial agents: a rational lead optimization approach

Tuberculosis (TB) represents a never-ending challenge toward which research efforts are needed. Drug resistance is the key problem that scientists in the field need to fight. The development of new drugs endowed with novel modes of action against different biological targets is of extreme importance; these new agents should also exhibit lower toxicity compared with the anti-TB drugs currently available. Furthermore, new drugs should be inexpensive since most of the TB-infected population lives in developing nations. In the last few years, numerous researchers have focused their attention on TB, leading to the discovery of some interesting compounds. Among these, the pyrrole-derived compounds we developed can be considered very promising antimycobacterial agents. Aided by molecular modeling studies, we synthesized numerous compounds characterized by the same 1,5-diarylpyrrole scaffold and elucidated very interesting antitubercular/antimycobacterial properties. Some compounds identified are extremely promising and represent a step towards the design of novel lead structures in the fight against TB. Our efforts to this end are reviewed here.     

Cytotoxic Activity and Structure–Activity Relationship of Triazole‐Containing Bis(Aryl Ether) Macrocycles

Cancer continues to be a worldwide health problem. Certain macrocyclic molecules have become attractive therapeutic alternatives for this disease because of their efficacy and, frequently, their novel mechanisms of action. Herein, we report the synthesis of a series of 20‐, 21‐, and 22‐membered macrocycles containing triazole and bis(aryl ether) moieties. The compounds were prepared by a multicomponent approach from readily available commercial substrates. Notably, some of the compounds displayed interesting cytotoxicity against cancer (PC‐3) and breast (MCF‐7) cell lines, especially those bearing an aliphatic or a trifluoromethyl substituent on the N‐phenyl moiety (IC₅₀<13 μm ). Additionally, some of the compounds were able to induce apoptosis relative to the solvent control; in particular, (Z)‐N‐cyclohexyl‐7‐oxo‐6‐[4‐(trifluoromethyl)phenyl]‐1¹H‐3,10‐dioxa‐6‐aza‐1(4,1)‐triazola‐4(1,3),9(1,4)‐dibenzenacyclotridecaphane‐5‐carboxamide ( 12 f ) was the most potent in this regard (22.7 % of apoptosis).     

Porous composites of hydroxyapatite‐filled poly[ethylene‐co‐(vinyl acetate)] for tissue engineering

A novel porous composite of hydroxyapatite/poly[ethylene‐co‐vinyl acetate)] (HAP/EVA) having better osteointegration was fabricated by gas foaming technique using a non toxic gas blowing agent intended for bone replacement applications. Combined techniques of scanning electronic microscopy (SEM) and X‐ray microcomputed tomography (µCT) analysis showed that the pore size and pore volume of the porous composite decrease with the increase of HAP content. The gravimetric analysis evidenced for good pore interconnectivity within the porous composites. Energy dispersive X‐ray analysis (EDX) studies inveterated the even scattering of Ca ions which in turn indicate the uniform dispersion of HAP particles in the composites. The significant gradation in Ca ion concentration seen in EDX studies is well accordance with the amount of HAP loading in the sample. Mechanical properties of the porous composite having different HAP content were measured to have the compressive strength varying from 1.06 to 2.2 MPa. Non‐cytotoxic character of the material was observed by the cytocompatibility studies. The metabolic activity of L929 cells seeded on the material assessed by [3‐(4,5‐dimethylthiazol)‐2‐yl]‐2,5‐diphenyltertrazolium bromide (MTT) assay was found to be 91.8%. The adhesion and migration of the cells inside the pore walls were visualized by confocal microscopy. Copyright © 2010 Society of Chemical Industry     

Amine-impregnated natural zeolite as filler in mixed matrix membranes for CO2/CH4 separation

Flat mixed matrix membranes (MMMs) comprising polysulfone and clinoptilolite-type natural zeolite were prepared by casting. Zeolite was modified with three alkylamines: ethanolamine (EA), bis(2-hydroxypropyl)amine (BHPA), and polyethylenimine (PEI) by the impregnation method. Impregnated zeolite samples were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and N₂ adsorption–desorption. The alkylamine loading extent determined by thermogravimetric analysis was 5.2, 4.8, and 8.5% for EA, BHPA, and PEI, respectively. Analyses of MMMs showed that the incorporation of impregnated zeolite affected the glass-transition temperature (T_g) and mixed-gas transport properties. In this regard, a decreasing trend of the T_g values from 185.5 °C for the polymeric membrane up to 176.6 °C for Clino-EA-based MMM was recorded. In addition, the gas separation performance was evaluated at two different feed pressures. At 50 psi, MMMs showed an enhancement up to 30% on the CO₂ permeability (22.79 Barrer) and 55% on the CO₂/CH₄ selectivity (45.78) in comparison with the polymeric membrane (CO₂ permeability 17.34 Barrer; CO₂/CH₄ selectivity 29.38). These values varied depending on the alkylamine, BHPA being the most selective. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48286.     

Monitoring of degradation of porous silicon photonic crystals using digital photography

We report the monitoring of porous silicon (pSi) degradation in aqueous solutions using a consumer-grade digital camera. To facilitate optical monitoring, the pSi samples were prepared as one-dimensional photonic crystals (rugate filters) by electrochemical etching of highly doped p-type Si wafers using a periodic etch waveform. Two pSi formulations, representing chemistries relevant for self-reporting drug delivery applications, were tested: freshly etched pSi (fpSi) and fpSi coated with the biodegradable polymer chitosan (pSi-ch). Accelerated degradation of the samples in an ethanol-containing pH 10 aqueous basic buffer was monitored in situ by digital imaging with a consumer-grade digital camera with simultaneous optical reflectance spectrophotometric point measurements. As the nanostructured porous silicon matrix dissolved, a hypsochromic shift in the wavelength of the rugate reflectance peak resulted in visible color changes from red to green. While the H coordinate in the hue, saturation, and value (HSV) color space calculated using the as-acquired photographs was a good monitor of degradation at short times (t < 100 min), it was not a useful monitor of sample degradation at longer times since it was influenced by reflections of the broad spectral output of the lamp as well as from the narrow rugate reflectance band. A monotonic relationship was observed between the wavelength of the rugate reflectance peak and an H parameter value calculated from the average red-green-blue (RGB) values of each image by first independently normalizing each channel (R, G, and B) using their maximum and minimum value over the time course of the degradation process. Spectrophotometric measurements and digital image analysis using this H parameter gave consistent relative stabilities of the samples as fpSi > pSi-ch.     

Comparison of rancimat evaluation modes to assess oxidative stability of fish oils

Two Rancimat evaluation modes, the induction period (IP), and the time needed to achieve a selected difference in conductivity (tΔK) were compared for assessing relative stability of anchovy, sardine, and hake liver oils. Mean coefficients of variation were 2.5 and 2.4% for IP and tΔK values, respectively, for oils oxidized in the range 55–90°C. Natural logarithms of IP and tΔK values varied linearly with temperature (P<0.001). A linear relationship (r=0.999) was established between the IP and tΔK values (P<0.001). Relative oxidative stability of fish oils was determined with the same degree of confidence by either IP or tΔK values.     

Incorporation of polyfluorenes into poly(lactic acid) films for sensor and optoelectronics applications

Films of neat and plasticized biodegradable poly(lactic acid) (PLA) matrices containing anionic conjugated polyelectrolytes, poly[9,9‐bis(4‐phenoxybutylsulfonate)]fluorene‐2,7‐diyl‐alt‐arylenes, with 1,4‐phenylene and 4,4″‐p‐terphenylene, respectively, as arylene groups or a neutral poly(9,9‐dialkylfluorene) for comparison were prepared by solution casting. These films were characterized using differential scanning calorimetry, thermogravimetry, scanning electron microscopy and fluorescence spectroscopy. In addition, the effects of plasticizer on the thermal properties and the oxygen permeability of the PLA films were measured through the oxygen transmission rate. Results show that it is possible to obtain thin, optically transparent and luminescent films with potential in oxygen sensing, exhibiting good thermal and photochemical stability. At high polyelectrolyte content, evidence is found for phase separation and aggregate formation and it is no longer possible to obtain completely homogeneous films. The possibility of incorporating the cationic metal complex tris(2,2′‐bipyridyl)ruthenium(II) into plasticized PLA films containing conjugated polyelectrolytes for dual‐wavelength ratiometric luminescence sensing is also discussed. Copyright © 2012 Society of Chemical Industry     

Electrospun nanofibers of a degradable poly(ester amide). Scaffolds loaded with antimicrobial agents

Electrospinning conditions were evaluated to prepare micro/nanofibers of a biodegradable poly(ester amide) constituted by L-alanine, 1,12-dodecanediol and sebacic acid. 1,1,1,3,3,3-Hexafluroroisopropanol appeared as the most appropriate solvent to obtain fibers in a wide range of electrospinning conditions that allowed tuning the final diameter size. Fiber diameter increased with the flow, distance between the needle tip and the collector and decreasing voltage, which made it possible to obtain homogeneous fibers in the 1700–320 nm range. Fibers were loaded with antimicrobial agents like silver and chlorohexidine, and the influence of agent concentration in the electrospinning solutions on the fiber diameter size was determined. The polymer was able to crystallize during the electrospinning process, giving rise to a structure slightly different from that obtained by solution crystallization and related to that attained after crystallization from the melt state. Addition of antimicrobial agents had little effect on the degree of crystallinity, although it decreased slightly when chlorhexidine was employed. Scaffolds prepared from the silver and chlorhexidine loaded samples supported cell adhesion and proliferation. Furthermore, a clear and well differentiated antimicrobial effect against both Gram-positive (e.g. M. luteus) and Gram-negative (e.g. E. coli) bacteria was demonstrated.