Effects of dietary saturated andtrans fatty acids on cholesteryl ester synthesis and hydrolysis in the testes of rats

Studies were made of the enzymic synthesis and hydrolysis of cholesteryl esters in rat testes. Weanling rats were fed for 14 weeks diets containing 5% by wt of hydrogenated coconut oil (HCO), a concentrate of ethyl elaidate and linolelaidate (TRANS), devoid of essential fatty acids (EFA), or safflower oil (SAFF). Cholesterol esterifying activity was localized in the soluble fraction, and cholesteryl ester hydrolase activity was distributed in both particulate and soluble fractions obtained from tissue homogenates. The optimum pH was 6.0 for esterification and 6.9–7.0 for hydrolysis. Neither esterifying nor hydrolytic activity was affected by freezing and thawing, but both reactions were inhibited by heat or sonication. The animals of both the HCO and TRANS groups had developed an EFA deficiency before they were sacrificed. The EFA deficiency produced upon feeding the HCO diet had no apparent effect on the synthesis and hydrolysis of cholesteryl esters in rat testes. The TRANS diet influenced the development of the testes as judged by their size, and cholesterol esterifying and cholesteryl ester hydrolyzing activities were suppressed in the testes of the animals of this group. A major difference in the effects of the HCO and TRANS diets on the lipids of the testes was the relatively minor amount of eicosatrienoic acid (20∶3) and the elevated level of docosapentaenoic acid (22∶5) in the cholesteryl esters of the testicular lipids of the TRANS group.     

Densified biomass can cost-effectively mitigate greenhouse gas emissions and address energy security in thermal applications

Regional supplies of biomass are currently being evaluated as feedstocks in energy applications to meet renewable portfolio (RPS) and low carbon fuel standards. We investigate the life cycle greenhouse gas (GHG) emissions and associated abatement costs resulting from using densified switchgrass for thermal and electrical energy. In contrast to the large and positive abatement costs for using biomass in electricity generation ($149/Mg CO(2)e) due to the low cost of coal and high feedstock and power plant operation costs, abatement costs for replacing fuel oil with biomass in thermal applications are large and negative (-$52 to -$92/Mg CO(2)e), resulting in cost savings. Replacing fuel oil with biomass in thermal applications results in least cost reductions compared to replacing coal in electricity generation, an alternative that has gained attention due to RPS legislation and the centralized production model most often considered in U.S. policy. Our estimates indicate a more than doubling of liquid fuel displacement when switchgrass is substituted for fuel oil as opposed to gasoline, suggesting that, in certain U.S. locations, such as the northeast, densified biomass would help to significantly decarbonize energy supply with regionally sourced feedstock, while also reducing imported oil. On the basis of supply projections from the recently released Billion Ton Report, there will be enough sustainably harvested biomass available in the northeast by 2022 to offset the entirety of heating oil demand in the same region. This will save NE consumers between $2.3 and $3.9 billion annually. Diverting the same resource to electricity generation would cost the region $7.7 billion per year. While there is great need for finding low carbon substitutes for coal power and liquid transportation fuels in the U.S., we argue that in certain regions it makes cost- (and GHG mitigation-) effective sense to phase out liquid heating fuels with locally produced biomass first.     

Effects of static axial strain on the tensile properties and failure mechanisms of self-assembled collagen fibers

Collagen fibers form the structural units of connective tissue throughout the body, transmitting force, maintaining shape, and providing a scaffold for cells. Our laboratory has studied collagen self-assembly since the 1970s. In this study, collagen fibers were self-assembled from molecular collagen solutions and then stretched to enhance alignment. Fibers were tested in uniaxial tension to study the mechanical properties and failure mechanisms. Results reported suggest that axial orientation of collagen fibrils can be achieved by stretching uncrosslinked collagen fibers. Stretching by about 30% not only results in decreased diameter and increased tensile strength but also leads to unusual failure mechanisms that inhibit crack propagation across the fiber. It is proposed that stretching serves to generate oriented fibrillar substructure in self-assembled collagen fibers. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 63: 1429–1440, 1997     

The solubility of methane in aqueous solutions of monoethanolamine,diethanolamine and triethanolamine

The solubility of methane in 3 kmol/m³ solutions of monoethanolamine, diethanolamine, and triethanolamine was measured from 25° to 125°C and pressures up to about 13 MPa. Measurements were also made for the solubility of methane in water at 25° to 125°C and pressures up to 18 MPa in order to confirm the accuracy of the experimental technique. It is demonstrated that methane is more soluble (in terms of mole fraction) in the amine solution than in pure water. Furthermore, the solubility is an increasing function of the size of the alkanolamine. The solubility data were modeled using a Henry's-law approach and the results summarized in terms of salting-in coefficients.     

Isomeric Carborane Neuromuscular Blocking Agents

We synthesized a family of neuromuscular blocking agents (NMB) based on decamethonium, but containing a carborane cluster in the methylene chain between the two quaternary ammonium groups. The carborane cluster isomers o-NMB, m-NMB, and p-NMB were tested in animals for neuromuscular block and compared with agents used clinically: rocuronium and decamethonium. All three isomers caused reversible muscle weakness in mice as determined by grip strength and inverted screen tests, with a potency rank of p-NMB > rocuronium > decamethonium > m-NMB > o-NMB. The mechanism of action of the compounds was determined by using the in vitro rat phrenic nerve hemi-diaphragm preparation and electrophysiologic measurements in cells. Neostigmine reversed hemi-diaphragm weakness caused by the three isomers and rocuronium, but not succinylcholine. In electrophysiologic recordings of currents through acetylcholine receptor channels, the carborane compounds did not activate channel activity but did inhibit channel activation by acetylcholine. These results demonstrate that the carborane neuromuscular blocking agents are non-depolarizers in contrast to the depolarizing action of the parent compound.     

Dynamics of diffusion with reversible binding in microscopically heterogeneous membranes: General theory and applications to dermal penetration

Essentially all biological membranes and tissues exhibit microscopic heterogeneity in the form of cellular, lamellar or other organization, and molecular diffusion in these materials is frequently slowed by binding to elements of the microstructure (“trapping”). This paper addresses situations where binding is describable as a linear reversible process at the microscale, with forward (“on”) and reverse (“off”) rate constants k_f(x) and k_r(x) that vary with position. Very commonly it is tacitly assumed that the macroscopically observable binding behavior should follow the same rate law with the substitution of appropriate effective (tissue-average) rate constants and . This assumption is probed theoretically for spatially periodic microstructures using a judicious application of numerical calculations and asymptotic analysis to prototypical one-dimensional transport problems. We find that smooth microscopic variations produce an anomalous macroscopic exchange between free and bound solute populations that is not well described by a single pair of forward and reverse rate constants, i.e., violates the usual paradigm. In contrast, discontinuous variations (as in two-phase composite media) are evidently well described by the usual paradigm. For the latter case we derive simple and general algebraic equations giving and , and generalize them to any three-dimensional unit cell representing the tissue microstructure. Validity of the formulas is demonstrated with reference to a concrete example describing molecular diffusion through the stratum corneum (barrier) layer of skin, comprising lipid (intercellular) and corneocyte (cellular) phases. Our analysis extends coarse-graining (homogenization, effective transport) theory for irreversible trapping systems to the reversible case.     

Porous composites of hydroxyapatite‐filled poly[ethylene‐co‐(vinyl acetate)] for tissue engineering

A novel porous composite of hydroxyapatite/poly[ethylene‐co‐vinyl acetate)] (HAP/EVA) having better osteointegration was fabricated by gas foaming technique using a non toxic gas blowing agent intended for bone replacement applications. Combined techniques of scanning electronic microscopy (SEM) and X‐ray microcomputed tomography (µCT) analysis showed that the pore size and pore volume of the porous composite decrease with the increase of HAP content. The gravimetric analysis evidenced for good pore interconnectivity within the porous composites. Energy dispersive X‐ray analysis (EDX) studies inveterated the even scattering of Ca ions which in turn indicate the uniform dispersion of HAP particles in the composites. The significant gradation in Ca ion concentration seen in EDX studies is well accordance with the amount of HAP loading in the sample. Mechanical properties of the porous composite having different HAP content were measured to have the compressive strength varying from 1.06 to 2.2 MPa. Non‐cytotoxic character of the material was observed by the cytocompatibility studies. The metabolic activity of L929 cells seeded on the material assessed by [3‐(4,5‐dimethylthiazol)‐2‐yl]‐2,5‐diphenyltertrazolium bromide (MTT) assay was found to be 91.8%. The adhesion and migration of the cells inside the pore walls were visualized by confocal microscopy. Copyright © 2010 Society of Chemical Industry     

Effects of alkyl substitution on the physical properties and gas transport behavior in selected poly(R-phenoxyphosphazenes)

A systematic preparation of alkyl substituted phenoxyphosphazene polymers was performed and their gas transport properties determined. In this study, phosphazenes substituted with 4-methylphenol, 4-ethylphenol, and 4-isopropylphenol are reported. An additional polymer substituted with 4-tert-butylphenoxy-1-ethanol also was synthesized in this work. Data derived for these materials, including chemical, thermal and gas transport characterization, were compared to previous reports discussing poly[bis-phenoxyphosphazene] and its analog with tert-butyl substitution: poly[bis-(4-tert-butylphenoxy)phosphazene]. The tert-butyl moiety influences orderly chain packing, presumably through steric hindrance that can influence aromatic π-stacking. For the new poly[(alkylphenoxy)phosphazenes], semicrystallinity is maintained and the added steric bulk serves to decrease the polymer glass transition temperature (Tg) and increase both permeability and selectivity for the gas pairs: O₂/N₂ and CO₂/CH₄. Removal of the tert-butyl moiety from the immediate vicinity of the backbone through a flexible spacer serves to depress the Tg as compared to poly[bis-(4-tert-butylphenoxy)phosphazene], but provides no performance enhancement for gas transport.     

The role of particle size of particulate nano-zinc oxide wood preservatives on termite mortality and leach resistance

Historically most residential wood preservatives were aqueous soluble metal formulations, but recently metals ground to submicron size and dispersed in water to give particulate formulations have gained importance. In this study, the specific role nano-zinc oxide (ZnO) particle size and leach resistance plays in termite mortality resulting from exposure to particulate ZnO-treated wood was investigated. Southern yellow pine (SYP) sapwood impregnated with three concentrations of two particle sizes (30 and 70 nm) of ZnO were compared to wood treated with soluble zinc sulphate (ZnSO₄) preservative for leach resistance and termite resistance. Less than four percent leached from the particulate nano-ZnO-treated specimens, while 13 to 25% of the zinc sulphate leached from the soluble treated wood. Nano-ZnO was essentially non-leachable from wood treated with 5% formulation for the 30-nm particle size. In a no-choice laboratory test, eastern subterranean termites (Reticulitermes flavipes) consumed less than 10% of the leached nano-ZnO-treated wood with 93 to 100% mortality in all treatment concentrations. In contrast, termites consumed 10 to 12% of the leached ZnSO₄-treated wood, but with lower mortality: 29% in the 1% treatment group and less than 10% (5 and 8%, respectively) in the group of wood blocks treated with 2.5 and 5.0% ZnSO₄. We conclude that termites were repelled from consuming wood treated with nano-ZnO, but when consumed it was more toxic to eastern subterranean termites than wood treated with the soluble metal oxide formulation. There were no differences in leaching or termite mortality between the two particle sizes of nano-ZnO.     

Simulation of the injection process in resin transfer molding

A simulation based on Darcy's law for modeling mold filling in resin transfer molding has been developed. The simulation uses a new Flow Analysis Network (FAN) technique to predict and track the movement of the free-surface, and a finite element method to solve the governing equation set for each successive flow front location. A variety of element types have been incorporated into the simulation, enabling modeling of flow for a variety of conditions of industrial interest including runner distribution systems, “2.5-D” shell geometries, and fully 3-D flows. The FAN technique developed here has two main benefits: it enables conservation of mass, even for highly distorted element shapes, and also, allows elements of different dimension to be simultaneously used in a single simulation. At present, the simulation predicts flow front position as a function of time, and the pressure distribution during the filling process for a number of inlet gating conditions. A number of examples are presented and discussed to highlight the simulation's capabilities, including the filling of a complex automotive part.