Effects of high oxygen concentrations on microbial biosensor signals. Hyperoxygenation by means of perfluorodecalin

Amperometric biosensors register oxygen depletion in response to analyte catabolism, and thus are limited by the availability of dissolved oxygen. Microbial sensors containing immobilized cells of Gluconobacter oxydans were hyperoxygenated to 400% of control levels and the effects on sensor responses to glucose were determined. Oxygenated perfluorodecalin (a completely fluorinated organic substance) was as effective in hyperoxygenation as direct sparging with O2, increasing sensor base medium oxygen concentrations from 9.3 to 37 mg/l. Hyperoxygenation enhanced maximal biosensor response amplitudes, particularly at high cell loading densities. Maximal response rates were also improved, although less dramatically. Results suggest that hyperoxygenation may be a new general approach for modulating biosensor responses.     

Decontamination of petroleum sludges by hot water extraction

The process of hot water extraction of tar sand was modified and adapted for removal of heavy oil from bottom tank petroleum sludges, and was submitted to a laboratory feasibility study. This process can also be utilized to clean beach sands contaminated by accidental heavy oil spills. In the case of oil contaminated sands, a single stage extraction has yielded a 99% recovery of hydrocarbons and clean sands (containing less than 0.1% of hydrocarbons) which are thus safe to be returned to the environment. In the case of petroleum bottom tank sludge, it was necessary to proceed with a double stage extraction with the addition of a wetting agent. A dosage of a Na₂ Si O₃ aqueous solution of 1% by weight has proven efficient, allowing an 82% recovery of hydrocarbons, with only 0.5% of hydrocarbons content in the solid residues.     

Competing Effects of Radio Frequency Fields on Carbon Nanotube/Resin Systems: Alignment versus Heating

This work shows that radio-frequency (RF) fields can simultaneously align carbon nanotubes (CNTs) dispersed in a resin and induce Joule heating to cure the resin. The timescales of alignment and curing using RF heating are numerically computed and compared at different field strengths in order to determine a temperature where alignment happens before the matrix crosslinks. Composites are experimentally fabricated at the desired target temperature and are optically analyzed and quantified; the CNT network is successfully aligned in the direction of the applied electric field. This methodology can be used to create composites where the local alignment can be varied across the sample. Composites fabricated using RF fields have higher electrical conductivity in the direction of the aligned CNTs than an oven-cured, randomly aligned sample. Also, RF-cured nanocomposites exhibit higher tensile strength and modulus in the direction of alignment compared to an oven-cured sample. Finally, it is further demonstrated how this methodology can be coupled with a direct ink writing additive manufacturing process to induce alignment in any desired direction, even orthogonal to the shear forces in the extrusion direction.     

Molecularly Targeted Agents as Radiosensitizers in Cancer Therapy—Focus on Prostate Cancer

As our understanding of the molecular pathways driving tumorigenesis improves and more druggable targets are identified, we have witnessed a concomitant increase in the development and production of novel molecularly targeted agents. Radiotherapy is commonly used in the treatment of various malignancies with a prominent role in the care of prostate cancer patients, and efforts to improve the therapeutic ratio of radiation by technologic and pharmacologic means have led to important advances in cancer care. One promising approach is to combine molecularly targeted systemic agents with radiotherapy to improve tumor response rates and likelihood of durable control. This review first explores the limitations of preclinical studies as well as barriers to successful implementation of clinical trials with radiosensitizers. Special considerations related to and recommendations for the design of preclinical studies and clinical trials involving molecularly targeted agents combined with radiotherapy are provided. We then apply these concepts by reviewing a representative set of targeted therapies that show promise as radiosensitizers in the treatment of prostate cancer.     

Small amphiphilic organics, coordination extended solids, and constant curvature structures

In this Account, we explore the role constant curvature structures play in amphiphilic small molecule crystals and extended coordination solids. A constant curvature structure is one in which there is a surface or interface that has the same curvature throughout its surface. Simple examples of such structures contain spheres (micelles), columns, or layers. Yet another family are cubic as is found in the gyroid topology. For amphiphilic systems, there are two domains, one generally hydrophobic and the other hydrophilic. We find that the interfaces between these two domains in small molecule structures resemble those in larger scale systems and adopt topologies related to constant curvature structures. The hydrophobic-to-total volume ratio, a molecular parameter, can be used to predict which type of constant curvature structure is adopted. In the case of three coordinate extended solids, constant curvature plays a role both in the extended net topology and in the hydrophobic-to-hydrophilic interface.     

Studies on the Catalysis by Lithium Perchlorate of Reactions of Aromatic Amines with Diethyl Azodicarboxylate and Naphtalen-2-ol with 4-phenyl-1,2,4-triazoline-3,5-dione

The ene-like reaction of naphtalen-1-ylamine and naphtalen-2-ylamine, and pyridin-2-ylamine with diethyl azodicarboxylate (DEAD) as well as that of naphthalen-2-ol with 4-phenyl-1,2,4-trizoline-3,5-dione is catalyzed by lithium perchlorate. Also conversion of ester function of (DEAD) to amide function in reaction with 2-aminopyridine and further rearrangement of ethyl N-pyridyn-2-ylcarbamoylazoformate into ethyl pyridin-2-ylcarbamate are catalyzed by LiClO₄.     

Controlling micro‐ and nanofibrillar morphology of polymer blends in low‐speed melt spinning process. Part II: Influences of extrusion rate on morphological changes of a PLA/PVA blend through a capillary die

The effects of the extrusion rate on the morphological changes of poly(lactic acid) (PLA)/poly(vinyl alcohol) (PVA) blend through a capillary die were investigated. In this study, the extrusion rate or mass flow rate is altered from 0.5 g min^?1 to 2 g min^?1 with an increment of 0.5 g min^?1. The PLA/PVA blend with a composition of 30/70 (wt %) exhibits a particle matrix morphology with dispersed PLA droplets within the PVA matrix. It is found that, the spherical or ellipsoidal dispersed PLA droplets are elongated and coalesced into rod‐like or longer ellipsoidal droplets when they pass through the capillary die. When the extrusion rate increases, the coalescence between the large PLA droplets occurs more intense. However, the changes of the extrusion rate have no strong effect on the coalescence of small droplets having diameter less than about 150 nm. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44257.