Expression of acetylcholinesterase messenger RNA in human brain: an in situ hybridization study

The distribution of messenger RNA coding for acetylcholinesterase was studied in human post mortem brain and rhesus monkey by in situ hybridization histochemistry and compared to the distribution of acetylcholinesterase activity. Acetylcholinesterase messenger RNA had--similar to acetylcholinesterase enzymatic activity--a widespread distribution in human bain. Acetylcholinesterase messenger RNA positive cells corresponded to perikarya rich in acetylcholinesterase activity in most but not all regions. Examples for mismatches included the inferior olive and human cerebellar cortex. The presence of hybridization signals in cerebral cortex and an enrichment in layer III and V of most isocortical areas confirmed that perikaryal acetylcholinesterase in cerebral cortex is of postsynaptic origin and not derived from cholinergic projections. In striatum the expression of high levels of acetylcholinesterase messenger RNA was restricted to a small population of large striatal neurons. In addition, low levels of expression were found in most medium sized striatal neurons. Cholinergic neurons tended to express high levels of acetylcholinesterase messenger RNA whereas in cholinoceptive neurons the levels were moderate to low. However, some noncholinergic neurons like dopaminergic cells in substantia nigra, noradrenergic cells in locus coeruleus, serotoninergic cells in raphé dorsalis, GABAergic cells in thalamic reticular nucleus, granular cells in cerebellar cortex and pontine relay neurons expressed levels comparable to cholinergic neurons in basal forebrain. It is suggested that neurons expressing high levels of acetylcholinesterase messenger RNA may synthesize acetylcholinesterase for axonal transport whereas neurons with an expression of acetylcholinesterase confined to somatodendritic regions tend to contain lower levels of acetylcholinesterase messenger RNA.     

Influence of the binder on the properties of catalysts based on titanium-vanadium oxides

The influence of the nature of the binder and its concentration in V₂O₅/TiO₂ catalysts on their mechanical and catalytic properties has been studied. The characterization analysis showed that the agglomeration mechanism is different when an inorganic acid, such as H₃PO₄, or a natural silicate, such as sepiolite, were used. Two different patterns are proposed, which explain the effect of these binders on the performance of this type of catalyst in the selective catalytic reduction of NO _x with NH₃.     

Comparison of the ligase chain reaction with solid and liquid culture media for routine detection of Mycobacterium tuberculosis in nonrespiratory specimens

The aim of this study was to compare the results of a commercial assay based on the ligase chain reaction [(LCR) LCx Probe System MTB; Abbott, USA] with those of culture in liquid medium (Septi-Chek AFB; Becton-Dickinson, USA) and culture on the egg-based L?wenstein-Jensen solid medium for the direct detection of Mycobacterium tuberculosis complex in nonrespiratory specimens. The results were analyzed according to the standard definition of a true-positive result. Two hundred thirty-five nonrespiratory samples routinely submitted to rule out tuberculosis were analyzed. All samples were smear-negative. Mycobacterial growth in either culture medium was detected in 18 (7.6%) specimens: Mycobacterium tuberculosis was recovered from seven (38.9%) specimens cultured on L?wenstein-Jensen medium and from 18 (100%) specimens cultured in Septi-Chek AFB. The LCR protocol was positive in 22 specimens. None of the LCR-negative controls showed positive results. All samples positive by culture on L?wenstein-Jensen medium were positive by culture in liquid medium and by the LCR assay. However, Mycobacterium tuberculosis was detected by culture in liquid medium in two specimens that were negative by the LCR assay, whereas six specimens negative by culture in liquid medium were positive by the LCR protocol; three of these were identified as true-positive results of the LCR assay. The sensitivity, specificity, and positive and negative predictive values were 33.3%, 100%, 100%, and 93.8%, respectively, for L?wenstein-Jensen medium; 85.7%, 100%, 100%, and 98.6% for the liquid medium; and 90.4%, 98.5%, 86.3%, and 99% for the LCR assay. These findings indicate that the LCR assay may be a valid method of high diagnostic yield for direct detection of Mycobacterium tuberculosis complex in nonrespiratory specimens.     

The prevalence of antibiotic-resistant faecal Escherichia coli in healthy volunteers in Venezuela

Faecal samples were collected from healthy volunteers in two regions in Venezuela, the village of Grulla (n = 195) and the city of Mérida (n = 181), and analysed for the prevalence of antibiotic resistant faecal Escherichia coli as well as the antibiotic susceptibility of the strains isolated. The highest prevalences of resistance were observed for amoxicillin, oxytetracycline, sulfamethoxazole and trimethoprim. The percentages found for Grulla were 46, 38, 44 and 30%, respectively; for Mérida 39, 65, 56 and 36%, respectively. In Mérida, a significantly higher prevalence of resistance for oxytetracycline was found (P < 0.05). Significant differences in the distribution of the MIC values between Grulla and Mérida were observed for amoxicillin, chloramphenicol and oxytetracycline (P < 0.05). In Grulla, the most frequent pattern was resistance to amoxicillin only and in Mérida to oxytetracycline only. Amoxicillin resistance was due to production of TEM1 beta-lactamase.     

Optical and structural properties of SiC nanocrystals

This paper presents the results of porous SiC characterizations using photoluminescence, scanning electronic microscopy and X-ray diffraction techniques. It is shown that the intensity of defect-related PL bands (2.13 and 2.54 eV) increases monotonically with PSiC thickness rise from 2.0 up to 12.0 μm. These luminescence centers are assigned to surface defects which appear at the PSiC etching process. Intensity enhancement for exciton-related PL bands (2.84, 3.04 and 3.24 eV ) is attributed to the exciton recombination rate increasing as result of electron-hole confinement realization in big size SiC NCs (6H-PSiC with inclusions of 15R- and 4H-PSiC) and/or quantum confinement exciton recombination in small-size 4H-PSiC NCs.     

Ceramic wastes as alternative raw materials for Portland cement clinker production

The cement industry has for some time been seeking procedures that would effectively reduce the high energy and environmental costs of cement manufacture. One such procedure is the use of alternative materials as partial replacements for fuel, raw materials or even clinker. The present study explores the reactivity and burnability of cement raw mixes containing fired red or white ceramic wall tile wastes and combinations of the two as alternative raw materials.The results showed that the new raw mixes containing this kind of waste to be technically viable, and to have higher reactivity and burnability than a conventional mix, providing that the particle size of the waste used is lower than 90 μm. The mineralogical composition and distribution in the experimental clinker prepared were comparable to the properties of the clinker manufactured with conventional raw materials. Due to the presence of oxides such as ZnO, ZrO₂ and B₂O₃ in tile glazing, the content of these oxides was higher in clinker made with such waste. The mix of red and white ceramic wall tile waste was found to perform equally or better than each type of waste separately, a promising indication that separation of the two would be unnecessary for the purpose described above.     

AlGaN/GaN HEMTS: material, processing, and characterization

The growth of AlGaN/GaN high electron mobility transistor (HEMT) structures on sapphire by metal organic vapor phase epitaxy (MOVPE) is described, with special emphasis on procedures to reduce dislocation density. All the processing steps involved in the fabrication of nitride-based HEMTs have been optimized, including dry etching by ion beam milling, evaporation of Pt/Ti/Au gate contacts, and SiN _x surface passivation. Devices with several gate lengths and different geometries have been fabricated by standard photo- and e-beam lithography. d.c. drain current and transconductance increase when gate length is reduced, up to 950 mA mm^–1 and 230 mS mm^–1, respectively, at V _GS=0 V, in HEMTs with a gate length L _G=0.2 m. A maximum output power higher than 5 W mm^–1 is estimated. Finally, small-signal measurements yield f _T=12 GHz and f _max=25 GHz for HEMTs with L _G=0.5 m, which increase up to 20 and 35 GHz for L _G=0.2 m, respectively. Limitation of high-frequency performance by parasitics is discussed.